This is Info file texinfo, produced by Makeinfo-1.64 from the input file texinfo.texi. This file documents Texinfo, a documentation system that uses a single source file to produce both on-line information and a printed manual. Copyright (C) 1988, 1990, 1991, 1992, 1993, 1995 Free Software Foundation, Inc. This is the second edition of the Texinfo documentation, and is consistent with version 2 of `texinfo.tex'. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Free Software Foundation.  File: texinfo, Node: Top, Next: Copying, Prev: (dir), Up: (dir) Texinfo ******* Texinfo is a documentation system that uses a single source file to produce both on-line information and printed output. The first part of this master menu lists the major nodes in this Info document, including the @-command and concept indices. The rest of the menu lists all the lower level nodes in the document. This is Edition 2.21 of the Texinfo documentation, 7 June 1995, for Texinfo Version Three. * Menu: * Copying:: Your rights. * Overview:: Texinfo in brief. * Texinfo Mode:: How to use Texinfo mode. * Beginning a File:: What is at the beginning of a Texinfo file? * Ending a File:: What is at the end of a Texinfo file? * Structuring:: How to create chapters, sections, subsections, appendices, and other parts. * Nodes:: How to write nodes. * Menus:: How to write menus. * Cross References:: How to write cross references. * Marking Text:: How to mark words and phrases as code, keyboard input, meta-syntactic variables, and the like. * Quotations and Examples:: How to write quotations, examples, etc. * Lists and Tables:: How to write lists and tables. * Indices:: How to create indices. * Insertions:: How to insert @-signs, braces, etc. * Glyphs:: How to indicate results of evaluation, expansion of macros, errors, etc. * Breaks:: How to force and prevent line and page breaks. * Definition Commands:: How to describe functions and the like in a uniform manner. * Footnotes:: How to write footnotes. * Conditionals:: How to specify text for either TeX or Info. * Format/Print Hardcopy:: How to convert a Texinfo file to a file for printing and how to print that file. * Create an Info File:: Convert a Texinfo file into an Info file. * Install an Info File:: Make an Info file accessible to users. * Command List:: All the Texinfo @-commands. * Tips:: Hints on how to write a Texinfo document. * Sample Texinfo File:: A sample Texinfo file to look at. * Sample Permissions:: Tell readers they have the right to copy and distribute. * Include Files:: How to incorporate other Texinfo files. * Headings:: How to write page headings and footings. * Catching Mistakes:: How to find formatting mistakes. * Refilling Paragraphs:: All about paragraph refilling. * Command Syntax:: A description of @-Command syntax. * Obtaining TeX:: How to Obtain TeX. * New Features:: Texinfo second edition features. * Command and Variable Index:: A menu containing commands and variables. * Concept Index:: A menu covering many topics. -- The Detailed Node Listing -- Overview of Texinfo * Using Texinfo:: Create a conventional printed book or an Info file. * Info Files:: What is an Info file? * Printed Books:: Characteristics of a printed book or manual. * Formatting Commands:: @-commands are used for formatting. * Conventions:: General rules for writing a Texinfo file. * Comments:: How to write comments and mark regions that the formatting commands will ignore. * Minimum:: What a Texinfo file must have. * Six Parts:: Usually, a Texinfo file has six parts. * Short Sample:: A short sample Texinfo file. * Acknowledgements:: Using Texinfo Mode * Texinfo Mode Overview:: How Texinfo mode can help you. * Emacs Editing:: Texinfo mode adds to GNU Emacs' general purpose editing features. * Inserting:: How to insert frequently used @-commands. * Showing the Structure:: How to show the structure of a file. * Updating Nodes and Menus:: How to update or create new nodes and menus. * Info Formatting:: How to format for Info. * Printing:: How to format and print part or all of a file. * Texinfo Mode Summary:: Summary of all the Texinfo mode commands. Updating Nodes and Menus * Updating Commands:: Five major updating commands. * Updating Requirements:: How to structure a Texinfo file for using the updating command. * Other Updating Commands:: How to indent descriptions, insert missing nodes lines, and update nodes in sequence. Beginning a Texinfo File * Four Parts:: Four parts begin a Texinfo file. * Sample Beginning:: Here is a sample beginning for a Texinfo file. * Header:: The very beginning of a Texinfo file. * Info Summary and Permissions:: Summary and copying permissions for Info. * Titlepage & Copyright Page:: Creating the title and copyright pages. * The Top Node:: Creating the `Top' node and master menu. * Software Copying Permissions:: Ensure that you and others continue to have the right to use and share software. The Texinfo File Header * First Line:: The first line of a Texinfo file. * Start of Header:: Formatting a region requires this. * setfilename:: Tell Info the name of the Info file. * settitle:: Create a title for the printed work. * setchapternewpage:: Start chapters on right-hand pages. * paragraphindent:: An option to specify paragraph indentation. * End of Header:: Formatting a region requires this. The Title and Copyright Pages * titlepage:: Create a title for the printed document. * titlefont center sp:: The `@titlefont', `@center', and `@sp' commands. * title subtitle author:: The `@title', `@subtitle', and `@author' commands. * Copyright & Permissions:: How to write the copyright notice and include copying permissions. * end titlepage:: Turn on page headings after the title and copyright pages. * headings on off:: An option for turning headings on and off and double or single sided printing. The `Top' Node and Master Menu * Title of Top Node:: Sketch what the file is about. * Master Menu Parts:: A master menu has three or more parts. Ending a Texinfo File * Printing Indices & Menus:: How to print an index in hardcopy and generate index menus in Info. * Contents:: How to create a table of contents. * File End:: How to mark the end of a file. Chapter Structuring * Tree Structuring:: A manual is like an upside down tree ... * Structuring Command Types:: How to divide a manual into parts. * makeinfo top:: The `@top' command, part of the `Top' node. * chapter:: * unnumbered & appendix:: * majorheading & chapheading:: * section:: * unnumberedsec appendixsec heading:: * subsection:: * unnumberedsubsec appendixsubsec subheading:: * subsubsection:: Commands for the lowest level sections. * Raise/lower sections:: How to change commands' hierarchical level. Nodes * Two Paths:: Different commands to structure Info output and printed output. * Node Menu Illustration:: A diagram, and sample nodes and menus. * node:: How to write a node, in detail. * makeinfo Pointer Creation:: How to create node pointers with `makeinfo'. The `@node' Command * Node Names:: How to choose node and pointer names. * Writing a Node:: How to write an `@node' line. * Node Line Tips:: Keep names short. * Node Line Requirements:: Keep names unique, without @-commands. * First Node:: How to write a `Top' node. * makeinfo top command:: How to use the `@top' command. * Top Node Summary:: Write a brief description for readers. Menus * Menu Location:: Put a menu in a short node. * Writing a Menu:: What is a menu? * Menu Parts:: A menu entry has three parts. * Less Cluttered Menu Entry:: Two part menu entry. * Menu Example:: Two and three part menu entries. * Other Info Files:: How to refer to a different Info file. Cross References * References:: What cross references are for. * Cross Reference Commands:: A summary of the different commands. * Cross Reference Parts:: A cross reference has several parts. * xref:: Begin a reference with `See' ... * Top Node Naming:: How to refer to the beginning of another file. * ref:: A reference for the last part of a sentence. * pxref:: How to write a parenthetical cross reference. * inforef:: How to refer to an Info-only file. `@xref' * Reference Syntax:: What a reference looks like and requires. * One Argument:: `@xref' with one argument. * Two Arguments:: `@xref' with two arguments. * Three Arguments:: `@xref' with three arguments. * Four and Five Arguments:: `@xref' with four and five arguments. Marking Words and Phrases * Indicating:: How to indicate definitions, files, etc. * Emphasis:: How to emphasize text. Indicating Definitions, Commands, etc. * Useful Highlighting:: Highlighting provides useful information. * code:: How to indicate code. * kbd:: How to show keyboard input. * key:: How to specify keys. * samp:: How to show a literal sequence of characters. * var:: How to indicate a metasyntactic variable. * file:: How to indicate the name of a file. * dfn:: How to specify a definition. * cite:: How to refer to a book that is not in Info. Emphasizing Text * emph & strong:: How to emphasize text in Texinfo. * Smallcaps:: How to use the small caps font. * Fonts:: Various font commands for printed output. * Customized Highlighting:: How to define highlighting commands. Quotations and Examples * Block Enclosing Commands:: Use different constructs for different purposes. * quotation:: How to write a quotation. * example:: How to write an example in a fixed-width font. * noindent:: How to prevent paragraph indentation. * Lisp Example:: How to illustrate Lisp code. * smallexample & smalllisp:: Forms for the `@smallbook' option. * display:: How to write an example in the current font. * format:: How to write an example that does not narrow the margins. * exdent:: How to undo the indentation of a line. * flushleft & flushright:: How to push text flushleft or flushright. * cartouche:: How to draw cartouches around examples. Making Lists and Tables * Introducing Lists:: Texinfo formats lists for you. * itemize:: How to construct a simple list. * enumerate:: How to construct a numbered list. * Two-column Tables:: How to construct a two-column table. Making a Two-column Table * table:: How to construct a two-column table. * ftable vtable:: How to construct a two-column table with automatic indexing. * itemx:: How to put more entries in the first column. Creating Indices * Index Entries:: Choose different words for index entries. * Predefined Indices:: Use different indices for different kinds of entry. * Indexing Commands:: How to make an index entry. * Combining Indices:: How to combine indices. * New Indices:: How to define your own indices. Combining Indices * syncodeindex:: How to merge two indices, using `@code' font for the merged-from index. * synindex:: How to merge two indices, using the default font of the merged-to index. Special Insertions * Braces Atsigns Periods:: How to insert braces, `@' and periods. * dmn:: How to format a dimension. * Dots Bullets:: How to insert dots and bullets. * TeX and copyright:: How to insert the TeX logo and the copyright symbol. * minus:: How to insert a minus sign. * math:: How to format a mathematical expression. Inserting `@', Braces, and Periods * Inserting An Atsign:: * Inserting Braces:: How to insert `{' and `}' * Controlling Spacing:: How to insert the right amount of space after punctuation within a sentence. Inserting Ellipsis, Dots, and Bullets * dots:: How to insert dots ... * bullet:: How to insert a bullet. Inserting TeX and the Copyright Symbol * tex:: How to insert the TeX logo. * copyright symbol:: How to use `@copyright'{}. Glyphs for Examples * Glyphs Summary:: * result:: How to show the result of expression. * expansion:: How to indicate an expansion. * Print Glyph:: How to indicate printed output. * Error Glyph:: How to indicate an error message. * Equivalence:: How to indicate equivalence. * Point Glyph:: How to indicate the location of point. Making and Preventing Breaks * Break Commands:: Cause and prevent splits. * Line Breaks:: How to force a single line to use two lines. * w:: How to prevent unwanted line breaks. * sp:: How to insert blank lines. * page:: How to force the start of a new page. * group:: How to prevent unwanted page breaks. * need:: Another way to prevent unwanted page breaks. Definition Commands * Def Cmd Template:: How to structure a description using a definition command. * Optional Arguments:: How to handle optional and repeated arguments. * deffnx:: How to group two or more `first' lines. * Def Cmds in Detail:: All the definition commands. * Def Cmd Conventions:: Conventions for writing definitions. * Sample Function Definition:: The Definition Commands * Functions Commands:: Commands for functions and similar entities. * Variables Commands:: Commands for variables and similar entities. * Typed Functions:: Commands for functions in typed languages. * Typed Variables:: Commands for variables in typed languages. * Abstract Objects:: Commands for object-oriented programming. * Data Types:: The definition command for data types. Footnotes * Footnote Commands:: How to write a footnote in Texinfo. * Footnote Styles:: Controlling how footnotes appear in Info. Conditionally Visible Text * Conditional Commands:: How to specify text for Info or TeX. * Using Ordinary TeX Commands:: You can use any and all TeX commands. * set clear value:: How to designate which text to format (for both Info and TeX); and how to set a flag to a string that you can insert. `@set', `@clear', and `@value' * ifset ifclear:: Format a region if a flag is set. * value:: Replace a flag with a string. * value Example:: An easy way to update edition information. Format and Print Hardcopy * Use TeX:: Use TeX to format for hardcopy. * Format with tex/texindex:: How to format in a shell. * Format with texi2dvi:: A simpler way to use the shell. * Print with lpr:: How to print. * Within Emacs:: How to format and print from an Emacs shell. * Texinfo Mode Printing:: How to format and print in Texinfo mode. * Compile-Command:: How to print using Emacs's compile command. * Requirements Summary:: TeX formatting requirements summary. * Preparing for TeX:: What you need to do to use TeX. * Overfull hboxes:: What are and what to do with overfull hboxes. * smallbook:: How to print small format books and manuals. * A4 Paper:: How to print on European A4 paper. * Cropmarks and Magnification:: How to print marks to indicate the size of pages and how to print scaled up output. Creating an Info File * makeinfo advantages:: `makeinfo' provides better error checking. * Invoking makeinfo:: How to run `makeinfo' from a shell. * makeinfo options:: Specify fill-column and other options. * Pointer Validation:: How to check that pointers point somewhere. * makeinfo in Emacs:: How to run `makeinfo' from Emacs. * texinfo-format commands:: Two Info formatting commands written in Emacs Lisp are an alternative to `makeinfo'. * Batch Formatting:: How to format for Info in Emacs Batch mode. * Tag and Split Files:: How tagged and split files help Info to run better. Installing an Info File * Directory file:: The top level menu for all Info files. * New Info File:: Listing a new info file. * Other Info Directories:: How to specify Info files that are located in other directories. Sample Permissions * Inserting Permissions:: How to put permissions in your document. * ifinfo Permissions:: Sample `ifinfo' copying permissions. * Titlepage Permissions:: Sample Titlepage copying permissions. Include Files * Using Include Files:: How to use the `@include' command. * texinfo-multiple-files-update:: How to create and update nodes and menus when using included files. * Include File Requirements:: What `texinfo-multiple-files-update' expects. * Sample Include File:: A sample outer file with included files within it; and a sample included file. * Include Files Evolution:: How use of the `@include' command has changed over time. Page Headings * Headings Introduced:: Conventions for using page headings. * Heading Format:: Standard page heading formats. * Heading Choice:: How to specify the type of page heading. * Custom Headings:: How to create your own headings and footings. Formatting Mistakes * makeinfo preferred:: `makeinfo' finds errors. * Debugging with Info:: How to catch errors with Info formatting. * Debugging with TeX:: How to catch errors with TeX formatting. * Using texinfo-show-structure:: How to use `texinfo-show-structure'. * Using occur:: How to list all lines containing a pattern. * Running Info-Validate:: How to find badly referenced nodes. Finding Badly Referenced Nodes * Using Info-validate:: How to run `Info-validate'. * Unsplit:: How to create an unsplit file. * Tagifying:: How to tagify a file. * Splitting:: How to split a file manually. Second Edition Features * New Texinfo Mode Commands:: The updating commands are especially useful. * New Commands:: Many newly described @-commands.  File: texinfo, Node: Copying, Next: Overview, Prev: Top, Up: Top Texinfo Copying Conditions ************************** The programs currently being distributed that relate to Texinfo include portions of GNU Emacs, plus other separate programs (including `makeinfo', `info', `texindex', and `texinfo.tex'). These programs are "free"; this means that everyone is free to use them and free to redistribute them on a free basis. The Texinfo-related programs are not in the public domain; they are copyrighted and there are restrictions on their distribution, but these restrictions are designed to permit everything that a good cooperating citizen would want to do. What is not allowed is to try to prevent others from further sharing any version of these programs that they might get from you. Specifically, we want to make sure that you have the right to give away copies of the programs that relate to Texinfo, that you receive source code or else can get it if you want it, that you can change these programs or use pieces of them in new free programs, and that you know you can do these things. To make sure that everyone has such rights, we have to forbid you to deprive anyone else of these rights. For example, if you distribute copies of the Texinfo related programs, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must tell them their rights. Also, for our own protection, we must make certain that everyone finds out that there is no warranty for the programs that relate to Texinfo. If these programs are modified by someone else and passed on, we want their recipients to know that what they have is not what we distributed, so that any problems introduced by others will not reflect on our reputation. The precise conditions of the licenses for the programs currently being distributed that relate to Texinfo are found in the General Public Licenses that accompany them.  File: texinfo, Node: Overview, Next: Texinfo Mode, Prev: Copying, Up: Top Overview of Texinfo ******************* "Texinfo"(1) (*note Overview-Footnotes::) is a documentation system that uses a single source file to produce both on-line information and printed output. This means that instead of writing two different documents, one for the on-line help or other on-line information and the other for a typeset manual or other printed work, you need write only one document. When the work is revised, you need revise only one document. (You can read the on-line information, known as an "Info file", with an Info documentation-reading program.) * Menu: * Using Texinfo:: Create a conventional printed book or an Info file. * Info Files:: What is an Info file? * Printed Books:: Characteristics of a printed book or manual. * Formatting Commands:: @-commands are used for formatting. * Conventions:: General rules for writing a Texinfo file. * Comments:: How to write comments and mark regions that the formatting commands will ignore. * Minimum:: What a Texinfo file must have. * Six Parts:: Usually, a Texinfo file has six parts. * Short Sample:: A short sample Texinfo file. * Acknowledgements::  File: texinfo, Node: Overview-Footnotes, Up: Overview (1) Note that the first syllable of "Texinfo" is pronounced like "speck", not "hex". This odd pronunciation is derived from, but is not the same as, the pronunciation of TeX. In the word TeX, the `X' is actually the Greek letter "chi" rather than the English letter "ex". Pronounce TeX as if the `X' were the last sound in the name `Bach'; but pronounce Texinfo as if the `x' were a `k'. Spell "Texinfo" with a capital "T" and write the other letters in lower case.  File: texinfo, Node: Using Texinfo, Next: Info Files, Prev: Overview, Up: Overview Using Texinfo ============= Using Texinfo, you can create a printed document with the normal features of a book, including chapters, sections, cross references, and indices. From the same Texinfo source file, you can create a menu-driven, on-line Info file with nodes, menus, cross references, and indices. You can, if you wish, make the chapters and sections of the printed document correspond to the nodes of the on-line information; and you use the same cross references and indices for both the Info file and the printed work. `The GNU Emacs Manual' is a good example of a Texinfo file, as is this manual. To make a printed document, you process a Texinfo source file with the TeX typesetting program. This creates a DVI file that you can typeset and print as a book or report. (Note that the Texinfo language is completely different from TeX's usual language, PlainTeX, which Texinfo replaces.) If you do not have TeX, but do have `troff' or `nroff', you can use the `texi2roff' program instead. To make an Info file, you process a Texinfo source file with the `makeinfo' utility or Emacs's `texinfo-format-buffer' command; this creates an Info file that you can install on-line. TeX and `texi2roff' work with many types of printer; similarly, Info works with almost every type of computer terminal. This power makes Texinfo a general purpose system, but brings with it a constraint, which is that a Texinfo file may contain only the customary "typewriter" characters (letters, numbers, spaces, and punctuation marks) but no special graphics. A Texinfo file is a plain ASCII file containing text and "@-commands" (words preceded by an `@') that tell the typesetting and formatting programs what to do. You may edit a Texinfo file with any text editor; but it is especially convenient to use GNU Emacs since that editor has a special mode, called Texinfo mode, that provides various Texinfo-related features. (*Note Texinfo Mode::.) Before writing a Texinfo source file, you should become familiar with the Info documentation reading program and learn about nodes, menus, cross references, and the rest. (*note info: (info)Top, for more information.) You can use Texinfo to create both on-line help and printed manuals; moreover, Texinfo is freely redistributable. For these reasons, Texinfo is the format in which documentation for GNU utilities and libraries is written.  File: texinfo, Node: Info Files, Next: Printed Books, Prev: Using Texinfo, Up: Overview Info files ========== An Info file is a Texinfo file formatted so that the Info documentation reading program can operate on it. (`makeinfo' and `texinfo-format-buffer' are two commands that convert a Texinfo file into an Info file.) Info files are divided into pieces called "nodes", each of which contains the discussion of one topic. Each node has a name, and contains both text for the user to read and pointers to other nodes, which are identified by their names. The Info program displays one node at a time, and provides commands with which the user can move to other related nodes. *note info: (info)Top, for more information about using Info. Each node of an Info file may have any number of child nodes that describe subtopics of the node's topic. The names of child nodes are listed in a "menu" within the parent node; this allows you to use certain Info commands to move to one of the child nodes. Generally, an Info file is organized like a book. If a node is at the logical level of a chapter, its child nodes are at the level of sections; likewise, the child nodes of sections are at the level of subsections. All the children of any one parent are linked together in a bidirectional chain of `Next' and `Previous' pointers. The `Next' pointer provides a link to the next section, and the `Previous' pointer provides a link to the previous section. This means that all the nodes that are at the level of sections within a chapter are linked together. Normally the order in this chain is the same as the order of the children in the parent's menu. Each child node records the parent node name as its `Up' pointer. The last child has no `Next' pointer, and the first child has the parent both as its `Previous' and as its `Up' pointer.(1) (*note Info Files-Footnotes::) The book-like structuring of an Info file into nodes that correspond to chapters, sections, and the like is a matter of convention, not a requirement. The `Up', `Previous', and `Next' pointers of a node can point to any other nodes, and a menu can contain any other nodes. Thus, the node structure can be any directed graph. But it is usually more comprehensible to follow a structure that corresponds to the structure of chapters and sections in a printed book or report. In addition to menus and to `Next', `Previous', and `Up' pointers, Info provides pointers of another kind, called references, that can be sprinkled throughout the text. This is usually the best way to represent links that do not fit a hierarchical structure. Usually, you will design a document so that its nodes match the structure of chapters and sections in the printed output. But there are times when this is not right for the material being discussed. Therefore, Texinfo uses separate commands to specify the node structure for the Info file and the section structure for the printed output. Generally, you enter an Info file through a node that by convention is called `Top'. This node normally contains just a brief summary of the file's purpose, and a large menu through which the rest of the file is reached. From this node, you can either traverse the file systematically by going from node to node, or you can go to a specific node listed in the main menu, or you can search the index menus and then go directly to the node that has the information you want. If you want to read through an Info file in sequence, as if it were a printed manual, you can get the whole file with the advanced Info command `g* RET'. (*note Advanced Info commands: (info)Expert.) The `dir' file in the `info' directory serves as the departure point for the whole Info system. From it, you can reach the `Top' nodes of each of the documents in a complete Info system.  File: texinfo, Node: Info Files-Footnotes, Up: Info Files (1) In some documents, the first child has no `Previous' pointer. Occasionally, the last child has the node name of the next following higher level node as its `Next' pointer.  File: texinfo, Node: Printed Books, Next: Formatting Commands, Prev: Info Files, Up: Overview Printed Books ============= A Texinfo file can be formatted and typeset as a printed book or manual. To do this, you need TeX, a powerful, sophisticated typesetting program written by Donald Knuth.(1) (*note Printed Books-Footnotes::) A Texinfo-based book is similar to any other typeset, printed work: it can have a title page, copyright page, table of contents, and preface, as well as chapters, numbered or unnumbered sections and subsections, page headers, cross references, footnotes, and indices. You can use Texinfo to write a book without ever having the intention of converting it into on-line information. You can use Texinfo for writing a printed novel, and even to write a printed memo, although this latter application is not recommended since electronic mail is so much easier. TeX is a general purpose typesetting program. Texinfo provides a file called `texinfo.tex' that contains information (definitions or "macros") that TeX uses when it typesets a Texinfo file. (`texinfo.tex' tells TeX how to convert the Texinfo @-commands to TeX commands, which TeX can then process to create the typeset document.) `texinfo.tex' contains the specifications for printing a document. Most often, documents are printed on 8.5 inch by 11 inch pages (216mm by 280mm; this is the default size), but you can also print for 7 inch by 9.25 inch pages (178mm by 235mm; the `@smallbook' size) or on European A4 size paper (`@afourpaper'). (*Note Printing "Small" Books: smallbook. Also, see *Note Printing on A4 Paper: A4 Paper.) By changing the parameters in `texinfo.tex', you can change the size of the printed document. In addition, you can change the style in which the printed document is formatted; for example, you can change the sizes and fonts used, the amount of indentation for each paragraph, the degree to which words are hyphenated, and the like. By changing the specifications, you can make a book look dignified, old and serious, or light-hearted, young and cheery. TeX is freely distributable. It is written in a dialect of Pascal called WEB and can be compiled either in Pascal or (by using a conversion program that comes with the TeX distribution) in C. (*Note TeX Mode: (emacs)TeX Mode, for information about TeX.) TeX is very powerful and has a great many features. Because a Texinfo file must be able to present information both on a character-only terminal in Info form and in a typeset book, the formatting commands that Texinfo supports are necessarily limited. *Note How to Obtain TeX: Obtaining TeX.  File: texinfo, Node: Printed Books-Footnotes, Up: Printed Books (1) You can also use the `texi2roff' program if you do not have TeX; since Texinfo is designed for use with TeX, `texi2roff' is not described here. `texi2roff' is part of the standard GNU distribution.  File: texinfo, Node: Formatting Commands, Next: Conventions, Prev: Printed Books, Up: Overview @-commands ========== In a Texinfo file, the commands that tell TeX how to typeset the printed manual and tell `makeinfo' and `texinfo-format-buffer' how to create an Info file are preceded by `@'; they are called "@-commands". For example, `@node' is the command to indicate a node and `@chapter' is the command to indicate the start of a chapter. *Please note:* All the @-commands, with the exception of the `@TeX{}' command, must be written entirely in lower case. The Texinfo @-commands are a strictly limited set of constructs. The strict limits make it possible for Texinfo files to be understood both by TeX and by the code that converts them into Info files. You can display Info files on any terminal that displays alphabetic and numeric characters. Similarly, you can print the output generated by TeX on a wide variety of printers. Depending on what they do or what arguments(1) (*note Formatting Commands-Footnotes::) they take, you need to write @-commands on lines of their own or as part of sentences: * Write a command such as `@noindent' at the beginning of a line as the only text on the line. (`@noindent' prevents the beginning of the next line from being indented as the beginning of a paragraph.) * Write a command such as `@chapter' at the beginning of a line followed by the command's arguments, in this case the chapter title, on the rest of the line. (`@chapter' creates chapter titles.) * Write a command such as `@dots{}' wherever you wish but usually within a sentence. (`@dots{}' creates dots ...) * Write a command such as `@code{SAMPLE-CODE}' wherever you wish (but usually within a sentence) with its argument, SAMPLE-CODE in this example, between the braces. (`@code' marks text as being code.) * Write a command such as `@example' at the beginning of a line of its own; write the body-text on following lines; and write the matching `@end' command, `@end example' in this case, at the beginning of a line of its own after the body-text. (`@example' ... `@end example' indents and typesets body-text as an example.) As a general rule, a command requires braces if it mingles among other text; but it does not need braces if it starts a line of its own. The non-alphabetic commands, such as `@:', are exceptions to the rule; they do not need braces. As you gain experience with Texinfo, you will rapidly learn how to write the different commands: the different ways to write commands make it easier to write and read Texinfo files than if all commands followed exactly the same syntax. (For details about @-command syntax, see *Note @-Command Syntax: Command Syntax.)  File: texinfo, Node: Formatting Commands-Footnotes, Up: Formatting Commands (1) The word "argument" comes from the way it is used in mathematics and does not refer to a disputation between two people; it refers to the information presented to the command. According to the `Oxford English Dictionary', the word derives from the Latin for "to make clear, prove"; thus it came to mean `the evidence offered as proof', which is to say, `the information offered', which led to its mathematical meaning. In its other thread of derivation, the word came to mean `to assert in a manner against which others may make counter assertions', which led to the meaning of `argument' as a disputation.  File: texinfo, Node: Conventions, Next: Comments, Prev: Formatting Commands, Up: Overview General Syntactic Conventions ============================= All ASCII printing characters except `@', `{' and `}' can appear in a Texinfo file and stand for themselves. `@' is the escape character which introduces commands. `{' and `}' should be used only to surround arguments to certain commands. To put one of these special characters into the document, put an `@' character in front of it, like this: `@@', `@{', and `@}'. It is customary in TeX to use doubled single-quote characters to begin and end quotations: ` ` and ' ' (but without a space between the two single-quote characters). This convention should be followed in Texinfo files. TeX converts doubled single-quote characters to left- and right-hand doubled quotation marks and Info converts doubled single-quote characters to ASCII double-quotes: ` ` and ' ' to " . Use three hyphens in a row, `---', for a dash--like this. In TeX, a single or even a double hyphen produces a printed dash that is shorter than the usual typeset dash. Info reduces three hyphens to two for display on the screen. To prevent a paragraph from being indented in the printed manual, put the command `@noindent' on a line by itself before the paragraph. If you mark off a region of the Texinfo file with the `@iftex' and `@end iftex' commands, that region will appear only in the printed copy; in that region, you can use certain commands borrowed from PlainTeX that you cannot use in Info. Likewise, if you mark off a region with the `@ifinfo' and `@end ifinfo' commands, that region will appear only in the Info file; in that region, you can use Info commands that you cannot use in TeX. (*Note Conditionals::.) *Caution:* Do not use tabs in a Texinfo file! TeX uses variable-width fonts, which means that it cannot predefine a tab to work in all circumstances. Consequently, TeX treats tabs like single spaces, and that is not what they look like. To avoid this problem, Texinfo mode causes GNU Emacs to insert multiple spaces when you press the TAB key. Also, you can run `untabify' in Emacs to convert tabs in a region to multiple spaces.  File: texinfo, Node: Comments, Next: Minimum, Prev: Conventions, Up: Overview Comments ======== You can write comments in a Texinfo file that will not appear in either the Info file or the printed manual by using the `@comment' command (which may be abbreviated to `@c'). Such comments are for the person who reads the Texinfo file. All the text on a line that follows either `@comment' or `@c' is a comment; the rest of the line does not appear in either the Info file or the printed manual. (Often, you can write the `@comment' or `@c' in the middle of a line, and only the text that follows after the `@comment' or `@c' command does not appear; but some commands, such as `@settitle' and `@setfilename', work on a whole line. You cannot use `@comment' or `@c' in a line beginning with such a command.) You can write long stretches of text that will not appear in either the Info file or the printed manual by using the `@ignore' and `@end ignore' commands. Write each of these commands on a line of its own, starting each command at the beginning of the line. Text between these two commands does not appear in the processed output. You can use `@ignore' and `@end ignore' for writing comments. Often, `@ignore' and `@end ignore' is used to enclose a part of the copying permissions that applies to the Texinfo source file of a document, but not to the Info or printed version of the document.  File: texinfo, Node: Minimum, Next: Six Parts, Prev: Comments, Up: Overview What a Texinfo File Must Have ============================= By convention, the names of Texinfo files end with one of the extensions `.texinfo', `.texi', or `.tex'. The longer extension is preferred since it describes more clearly to a human reader the nature of the file. The shorter extensions are for operating systems that cannot handle long file names. In order to be made into a printed manual and an Info file, a Texinfo file *must* begin with lines like this: \input texinfo @setfilename INFO-FILE-NAME @settitle NAME-OF-MANUAL The contents of the file follow this beginning, and then you *must* end a Texinfo file with a line like this: @bye The `\input texinfo' line tells TeX to use the `texinfo.tex' file, which tells TeX how to translate the Texinfo @-commands into TeX typesetting commands. (Note the use of the backslash, `\'; this is correct for TeX.) The `@setfilename' line provides a name for the Info file and the `@settitle' line specifies a title for the page headers (or footers) of the printed manual. The `@bye' line at the end of the file on a line of its own tells the formatters that the file is ended and to stop formatting. Usually, you will not use quite such a spare format, but will include mode setting and start-of-header and end-of-header lines at the beginning of a Texinfo file, like this: \input texinfo @c -*-texinfo-*- @c %**start of header @setfilename INFO-FILE-NAME @settitle NAME-OF-MANUAL @c %**end of header In the first line, `-*-texinfo-*-' causes Emacs to switch into Texinfo mode when you edit the file. The `@c' lines which surround the `@setfilename' and `@settitle' lines are optional, but you need them in order to run TeX or Info on just part of the file. (*Note Start of Header::, for more information.) Furthermore, you will usually provide a Texinfo file with a title page, indices, and the like. But the minimum, which can be useful for short documents, is just the three lines at the beginning and the one line at the end.  File: texinfo, Node: Six Parts, Next: Short Sample, Prev: Minimum, Up: Overview Six Parts of a Texinfo File =========================== Generally, a Texinfo file contains more than the minimal beginning and end--it usually contains six parts: 1. Header The "Header" names the file, tells TeX which definitions' file to use, and performs other "housekeeping" tasks. 2. Summary Description and Copyright The "Summary Description and Copyright" segment describes the document and contains the copyright notice and copying permissions for the Info file. The segment must be enclosed between `@ifinfo' and `@end ifinfo' commands so that the formatters place it only in the Info file. 3. Title and Copyright The "Title and Copyright" segment contains the title and copyright pages and copying permissions for the printed manual. The segment must be enclosed between `@titlepage' and `@end titlepage' commands. The title and copyright page appear only in the printed manual. 4. `Top' Node and Master Menu The "Master Menu" contains a complete menu of all the nodes in the whole Info file. It appears only in the Info file, in the `Top' node. 5. Body The "Body" of the document may be structured like a traditional book or encyclopedia or it may be free form. 6. End The "End" contains commands for printing indices and generating the table of contents, and the `@bye' command on a line of its own.  File: texinfo, Node: Short Sample, Next: Acknowledgements, Prev: Six Parts, Up: Overview A Short Sample Texinfo File =========================== Here is a complete but very short Texinfo file, in 6 parts. The first three parts of the file, from `\input texinfo' through to `@end titlepage', look more intimidating than they are. Most of the material is standard boilerplate; when you write a manual, simply insert the names for your own manual in this segment. (*Note Beginning a File::.) In the following, the sample text is *indented*; comments on it are not. The complete file, without any comments, is shown in *Note Sample Texinfo File::. Part 1: Header -------------- The header does not appear in either the Info file or the printed output. It sets various parameters, including the name of the Info file and the title used in the header. \input texinfo @c -*-texinfo-*- @c %**start of header @setfilename sample.info @settitle Sample Document @c %**end of header @setchapternewpage odd Part 2: Summary Description and Copyright ----------------------------------------- The summary description and copyright segment does not appear in the printed document. @ifinfo This is a short example of a complete Texinfo file. Copyright @copyright{} 1990 Free Software Foundation, Inc. @end ifinfo Part 3: Titlepage and Copyright ------------------------------- The titlepage segment does not appear in the Info file. @titlepage @sp 10 @comment The title is printed in a large font. @center @titlefont{Sample Title} @c The following two commands start the copyright page. @page @vskip 0pt plus 1filll Copyright @copyright{} 1990 Free Software Foundation, Inc. @end titlepage Part 4: `Top' Node and Master Menu ---------------------------------- The `Top' node contains the master menu for the Info file. Since a printed manual uses a table of contents rather than a menu, the master menu appears only in the Info file. @node Top, First Chapter, (dir), (dir) @comment node-name, next, previous, up @menu * First Chapter:: The first chapter is the only chapter in this sample. * Concept Index:: This index has two entries. @end menu Part 5: The Body of the Document --------------------------------- The body segment contains all the text of the document, but not the indices or table of contents. This example illustrates a node and a chapter containing an enumerated list. @node First Chapter, Concept Index, Top, Top @comment node-name, next, previous, up @chapter First Chapter @cindex Sample index entry This is the contents of the first chapter. @cindex Another sample index entry Here is a numbered list. @enumerate @item This is the first item. @item This is the second item. @end enumerate The @code{makeinfo} and @code{texinfo-format-buffer} commands transform a Texinfo file such as this into an Info file; and @TeX{} typesets it for a printed manual. Part 6: The End of the Document ------------------------------- The end segment contains commands both for generating an index in a node and unnumbered chapter of its own and for generating the table of contents; and it contains the `@bye' command that marks the end of the document. @node Concept Index, , First Chapter, Top @comment node-name, next, previous, up @unnumbered Concept Index @printindex cp @contents @bye The Results ----------- Here is what the contents of the first chapter of the sample look like: This is the contents of the first chapter. Here is a numbered list. 1. This is the first item. 2. This is the second item. The `makeinfo' and `texinfo-format-buffer' commands transform a Texinfo file such as this into an Info file; and TeX typesets it for a printed manual.