\def\fileversion{2.10}
\def\filedate{1995/08/22}
\def\docdate {1995/01/06}
%
% \iffalse
%% File: rotating.dtx Copyright (C) 1995 Sebastian Rahtz and Leonor Barroca
%
% A package to provide a rotation environment, and
% rotating floats and captions
% 
%  This package is distributed in the hope that it will be useful,
%  but WITHOUT ANY WARRANTY; without even the implied warranty of
%  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
%
%<*driver>
\documentclass{ltxdoc}
\begin{document}
 \title{A style option for rotated objects in \LaTeX\thanks{This file
        has version number \fileversion, last
        revised \filedate.}}
 \author{Sebastian Rahtz \and Leonor Barroca}
 \author{Leonor Barroca}
 \date{\filedate}
 \maketitle
 \tableofcontents
 \listoffigures
 \listoftables
 \DocInput{rotating.dtx}
\end{document}
%</driver>
% \fi
% \CheckSum{367}
% \begin{abstract}
% This article documents a \LaTeX\ package, `rotating.sty',
% which perform all the different sorts of
% rotation one might like, including complete figures.
% \end{abstract}
% \section{History}
%
% Version 2.0 is a complete re-write, with most of the work now
% being done by the \LaTeXe\ graphics package.
%
% Version 2.1 provides a `clockwise' option to reinstate the behaviour
% described in the `\LaTeX\ Companion'
%
% Version 2.2 just intercepts the standard float macros instead
% of copying and changing the. The `twoside' option is obeyed.
%
% Version 2.5 corrects problems in sideways figures.
%
% Version 2.6 is a rewrite of the sideways floats via Frank Mittelbach
% (to whom many thanks for lookingat the  mangy code).
%
% Version 2.7 is checked for \LaTeX\ of December 94, and adds the option
% of twoside behaviour independent of the general twoside.
%
% Version 2.8 cleans up some mistakes pointed out by Harald Axel Sommerfeldt.
% Version 2.9 cleans up some (more) mistakes pointed out by Harald Axel Sommerfeldt.
% \section{Usage} 
% This style option provides three \LaTeX\ environments:
% \begin{description}
% \item[sideways] prints the contents turned through 90 degrees
%      counterclockwise
% \item[turn] prints the contents turned through an arbitrary angle
% \item[rotate] prints the contents turned through an arbitrary angle
%      but does \emph{not} leave any space for the result
% \end{description}
% A full set of examples are given in the file |examples.tex|
% Now we present the documented code.
% \section{Setup}
% \StopEventually{}
%    \begin{macrocode}
%<*package>
\ProvidesPackage{rotating}[\filedate\space\fileversion\space Rotation package]
\NeedsTeXFormat{LaTeX2e}
\newif\if@rot@twoside
\DeclareOption{clockwise}{% this is for compatibility
 \AtBeginDocument{\setkeys{Grot}{units=360}}%
}
\DeclareOption{counterclockwise}{%
 \AtBeginDocument{\setkeys{Grot}{units=-360}}%
}
%    \end{macrocode}
% Sideways figures and tables always take up the whole page. They can be
% rotated so that the bottom ot the figures is on the left or the right;
% the default is to always turn to the right. If the `twoside' option
% has been given to the main document class, this package then starts
% rotating sideways figures according to the page number (this requires
% two passes through \LaTeX{} at least). If you want the `twoside'
% option, but want the figures always in one direction, use the
% `figuresright' or `riguresleft' options to `rotating'.
%    \begin{macrocode}
\DeclareOption{figuresleft}{%
  \@rot@twosidefalse 
  \def\rot@LR{0}%
}
\DeclareOption{figuresright}{%
 \@rot@twosidefalse 
 \def\rot@LR{-1}%
}
\DeclareOption*{\PassOptionsToPackage{\CurrentOption}{graphics}}
\PassOptionsToPackage{dvips}{graphics}
\ExecuteOptions{clockwise}
\if@twoside 
  \@rot@twosidetrue
\else
  \@rot@twosidefalse
\fi
\def\rot@LR{-1}
\ProcessOptions
\RequirePackage{graphicx}
\RequirePackage{ifthen}
\def\rotdriver#1{\makeatletter\input{#1.def}\makeatother}
\newcount\r@tfl@t
\r@tfl@t0
%    \end{macrocode}
% \section{Turning and rotation environments}
% \begin{macro}{sideways}
% Environment to turn the contents through 90 degrees.
%    \begin{macrocode}
\def\sideways{%
  \Grot@setangle{90}%
  \setbox\z@\hbox\bgroup\ignorespaces}
\def\endsideways{%
  \unskip\egroup
  \Grot@x\z@
  \Grot@y\z@
  \Grot@box
}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{turn}
% Rotate the contents of the environment, leaving the appropriate space
%    \begin{macrocode}
\def\turn#1{%
  \Grot@setangle{#1}%
  \setbox\z@\hbox\bgroup\ignorespaces}
\def\endturn{%
  \unskip\egroup
  \Grot@x\z@
  \Grot@y\z@
  \Grot@box
}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{rotate}
% Rotate the contents of the environment, leaving \emph{no space}.
%    \begin{macrocode}
\def\rotate#1{%
  \Grot@setangle{#1}%
  \setbox\z@\hbox\bgroup\ignorespaces}
\def\endrotate{%
  \unskip\egroup
  \Grot@x\z@
  \Grot@y\z@
  \wd0\z@\dp0\z@\ht0\z@
  \Grot@box
}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\turnbox}
% A macro version of the `rotate' environment. 
%    \begin{macrocode}
\def\turnbox#1#2{%
  \Grot@setangle{#1}%
  \setbox\z@\hbox{{#2}}%
  \Grot@x\z@\Grot@y\z@
  \wd0\z@\dp0\z@\ht0\z@
  \Grot@box
}
%    \end{macrocode}
% \end{macro}
% \section{Sideways figures and tables}
% Now for the macros to provide a complete
% environment for sideways figures and tables.
% We define two environments |sidewaysfigure| and 
% |sidewaystable| that
% fit in with the normal table and figure floats. These are `fixed'
% environments that  just do 90 degree rotation, but it would be easy
% to parameterize this to do other rotations if needed (the mind
% boggles\ldots)
% 
% First a generalised `rotfloat' environment. We need to intercept
% \LaTeX's float macros, in order to change the assumed width of a
% float being |\columnwidth|. We want it to work on a width of
% |\textheight| so that when we rotate the float, it comes out
% the right height. This is not actually very satisfactory, since what
% we \emph{really} want is for rotated floats to occupy the space they
% actually \emph{use}. The captions are a problem --- since they can
% precede the figure or table, we cannot set them in a box of the
% right width (ie the \emph{height} of the forthcoming object), because
% it has not happened yet. The result of these difficulties is that
% rotated figures  always end up as full page figures.
%    \begin{macrocode}
\newsavebox\rot@float@box
\def\@rotfloat#1{%
  \@ifnextchar[%
    {\@xrotfloat{#1}}%
    {\edef\@tempa{\noexpand\@xrotfloat{#1}[\csname fps@#1\endcsname]}\@tempa}%
}
\def\@xrotfloat#1[#2]{%
  \@float{#1}[#2]%
%    \end{macrocode}
% Set the float contents in
% a box of |\textheight| instead of |\columnwidth|. 
%    \begin{macrocode}
  \begin{lrbox}\rot@float@box
  \begin{minipage}\textheight
 }
%    \end{macrocode}
% We call the |\end@float| macro having previously rotated
% the box |\@currbox|
% The rotation is either clockwise or
% anti-clockwise, depending on whether the page is odd or even;
% in oneside mode it is always odd.
%    \begin{macrocode}
\def\end@rotfloat{%
%    \end{macrocode}
% If we are going to know whether pages are odd or even, 
% we need to use the |\pageref| mechanism, and labels. But
% Labels won't work \emph{unless} the user has put in a
% caption. Beware!
%    \begin{macrocode}
   \end{minipage}\end{lrbox}%
   \global\advance\r@tfl@t by 1
   \label{RF\the\r@tfl@t}%
   \message{Adding sideways figure on }%
   \def\R@@page{\pageref{RF\the\r@tfl@t}}%
   \wd\rot@float@box\z@
   \ht\rot@float@box\z@
   \dp\rot@float@box\z@
   \vbox to \textheight{%
%    \end{macrocode}
% We need to know for sure which direction rotation is going to
% be in, so locally reset the graphics units.
%    \begin{macrocode}
    \setkeys{Grot}{units=360}%
    \if@rot@twoside
      \def\R@@page{\pageref{RF\the\r@tfl@t}}%
    \else
      \let\R@@page\rot@LR
    \fi 
    \ifthenelse{\isodd{\R@@page}}{% 
    \message{right hand page}%
    \vfill 
    \centerline{\rotatebox{90}{\box\rot@float@box}}%
         }{% 
    \message{left hand page}% 
    \centerline{\rotatebox{-90}{\box\rot@float@box}}%
     \vfill
         }% 
 }% 
   \end@float
}
%    \end{macrocode}
% The following definitions set up two environments, 
% \texttt{sidewaystable} and \texttt{sidewaysfigure}, which uses this
% type of float. Naturally, users may need to change these to suit
% their local style. Both contribute to the normal lists of figures
% and tables.
%    \begin{macrocode}
\def\sidewaysfigure{\@rotfloat{figure}}
%
\let\endsidewaysfigure\end@rotfloat
%
\def\sidewaystable{\@rotfloat{table}}
\let\endsidewaystable\end@rotfloat
%    \end{macrocode}
% Handling double column floats
%    \begin{macrocode}
\def\@rotdblfloat{%
  \if@twocolumn\let\reserved@a\@rotdbflt\else\let\reserved@a\@rotfloat\fi
  \reserved@a}
\def\@rotdbflt#1{\@ifnextchar[{\@rotxdblfloat{#1}}{\@rotxdblfloat{#1}[tp]}}
\def\@rotxdblfloat#1[#2]{%
  \hsize\textwidth\linewidth\textwidth
  \@float{#1}[#2]%
  \begin{lrbox}\rot@float@box
  \begin{minipage}\textheight
}
\def\end@rotdblfloat{%
%    \end{macrocode}
% If we are going to know whether pages are odd or even, 
% we need to use the |\pageref| mechanism, and labels. But
% Labels won't work \emph{unless} the user has put in a
% caption. Beware!
%    \begin{macrocode}
   \end{minipage}\end{lrbox}%
   \global\advance\r@tfl@t by 1
   \label{RF\the\r@tfl@t}%
   \message{Adding sideways figure on }%
   \def\R@@page{\pageref{RF\the\r@tfl@t}}%
   \@tempdima\ht\rot@float@box
   \advance\@tempdima by \dp\rot@float@box
\typeout{BOX wd: \the\wd\rot@float@box, ht: \the\ht\rot@float@box, dp: \the\dp\rot@float@box: so shift by .5 of \the\@tempdima}%
   \wd\rot@float@box\z@
   \ht\rot@float@box\z@
   \dp\rot@float@box\z@
   \vbox to \textheight{%
%    \end{macrocode}
% We need to know for sure which direction rotation is going to
% be in, so locally reset the graphics units.
%    \begin{macrocode}
    \setkeys{Grot}{units=360}%
    \if@rot@twoside
      \def\R@@page{\pageref{RF\the\r@tfl@t}}%
    \else
      \let\R@@page\rot@LR
    \fi 
    \ifthenelse{\isodd{\R@@page}}{% 
    \message{right hand page}%
    \vfill 
    \hbox to\textwidth{\hfill\rotatebox{90}{\box\rot@float@box}\hfill}%
         }{% 
    \message{left hand page}% 
    \hbox to \textwidth{\hfill\rotatebox{-90}{\box\rot@float@box}\hfill}%
     \vfill
         }% 
 }% 
   \end@dblfloat
}
\newenvironment{sidewaystable*}
               {\@rotdblfloat{table}}
               {\end@rotdblfloat}
\newenvironment{sidewaysfigure*}
               {\@rotdblfloat{figure}}
               {\end@rotdblfloat}

%    \end{macrocode}
%\subsection{Rotated captions only}
% Sometimes you may find that the rotation of complete figures does
% not give quite the right result, since they always take up the whole
% page. You may prefer to rotate the caption and the float contents
% separately within a conventional figure. Here we offer a suggestion
% for a |\rotcaption| command, which inserts the caption rotated
% by 90 degrees. It is essentially a copy of the normal captioning
% code.
% Styles which define the |\@makecaption| command may also need
% to define |\@makerotcaption|.
%    \begin{macrocode}
\def\rotcaption{\refstepcounter\@captype\@dblarg{\@rotcaption\@captype}}
\long\def\@rotcaption#1[#2]#3{%
\addcontentsline{\csname ext@#1\endcsname}{#1}{%
 \protect\numberline{\csname the#1\endcsname}{\ignorespaces #2}}%
  \par
  \begingroup
    \@parboxrestore
    \normalsize
    \@makerotcaption{\csname fnum@#1\endcsname}{#3}%
  \endgroup}
\long\def\@makerotcaption#1#2{%
 \setbox\@tempboxa\hbox{#1: #2}%
 \ifdim \wd\@tempboxa > .8\vsize
    \rotatebox{90}{%
    \begin{minipage}{.8\textheight}#1: #2\end{minipage}%
    }\par
 \else%
    \rotatebox{90}{\box\@tempboxa}%
 \fi
 \hspace{12pt}%
}
%    \end{macrocode}
%</package>
% \Finale
\endinput
%
