% \iffalse % subfigure.dtx
% Subfigure/subtable macros for use with the LaTeX figure/table environments.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Copyright (C) 1986-2002 Steven Douglas Cochran
% 
% The subfigure package is free software; it may be distributed under
% the conditions of the LaTeX Project Public License, either version 1.1
% of this license or (at your option) any later version. The latest
% version of this license is in:
%      http://www.latex-project.org/lppl.txt
% and version 1.1 or later is part of all distributions of LaTeX version
% 1999/06/01 or later.
%
% The captcont package is distributed in the hope that it will be
% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
% LaTeX Project Public License for more details.
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% @LaTeX-style-file{
%%    author     = "Steven Douglas Cochran",
%%    version    = "2.1.5",
%%    date       = "2005/04/29",
%%    time       = "14:24:08",
%%    filename   = "subfigure.sty",
%%    address    = "Digital Mapping Laboratory, School of Computer Science
%%                  Carnegie-Mellon University, 5000 Forbes Avenue
%%                  Pittsburgh, PA 15213-3890, USA",
%%    telephone  = "+1 412.268.5654",
%%    fax        = "+1 412.268.5576",
%%    email      = "cochran@ieee.org",
%%    codetable  = "ISO/ASCII",
%%    keywords   = "LaTeX, float, figure, table, captcont",
%%    supported  = "yes",
%%    abstract   = "LaTeX package for providing support for the
%%                  inclusion of small, `sub', figures and tables.  It
%%                  simplifies the positioning, captioning and
%%                  labeling of them within a single figure or table
%%                  environment.  In addition, this package allows
%%                  such subcaptions to be written to the List of
%%                  Figures or List of tables if desired."
%% }
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
%<*driver>
\NeedsTeXFormat{LaTeX2e}[1994/12/01]
\ProvidesFile{subfigure.dtx}
\documentclass{ltxdoc}
\usepackage[tight,TABTOPCAP]{subfigure}[2005/04/29]
\setlength\hfuzz{100pt}
\setlength\vfuzz{100pt}
\clubpenalty=10000
\widowpenalty=10000
\displaywidowpenalty=5000
\brokenpenalty=5000
\begin{document}
  \DocInput{subfigure.dtx}
\end{document}
%</driver>
%
%<*ltxdoc>
\AtBeginDocument{
%  \OnlyDescription % comment out for implementation details
  \EnableCrossrefs
  \RecordChanges
  \CodelineIndex}
\AtEndDocument{
  \PrintChanges
  \PrintIndex}
%</ltxdoc>
%
% \fi
% \catcode`\^=14 ^^A We will use a ^ for a comment rather than ^^A.
% \newcommand*{\Lopt}[1]{\textsf{#1}}         ^ Package options
% \newcommand*{\Lfile}[1]{\texttt{#1}}        ^ File names
% \newcommand*{\Lpack}[1]{\textsf{#1}}        ^ Package names
% \newcommand*{\Lenv}[1]{\texttt{#1}}         ^ Environment names
% \newcommand*{\Lcount}[1]{\textsl{\small#1}} ^ Counter names
% \newcommand*{\Lif}[1]{\textsc{\bf#1}}       ^ \if names
% ^ NOTE: Hacks added to make the final format are marked ``^finalhack''.
%
% \changes{v1.0}{05 Mar 1986}{Created.} 
%
% \changes{v1.1}{02 Nov 1988}{Initial revision.}
%
% \changes{v1.2}{30 Aug 1989}{Added a separate bottom margin and
% expanded the comments.}
% 
% \changes{v1.3}{22 Oct 1990}{Changed test for empty subcaption inside
% of \cmd{\@subfigure} to compare tokens and not the subcaption vs.\
% \cmd{\@empty}. The former (incorrect) test caused an error when the
% first two letters of the subcaption were the same.}
% 
% \changes{v1.4}{27 Jun 1992}{Added a hack to allow the \cmd{\label}
% command to be used within the body of the subfigure giving a
% reference label in the form \cmd{\arabic{thefigure}\thesubfigure}.
% Added standard file header for style.}
%
% \changes{v1.5}{11 Aug 1992}{Fixed a bug which caused a problem with
% subcaptions that contained expressions like \cmd{\sqrt};  This was
% pointed out by Tom Scavo (scavo\@cie.uoregon.edu).  A separate bug
% was fixed which caused different sized subcaptions to be misaligned;
% This problem was pointed out by Simon Marshall
% (S.Marshal\@Hull.ac.uk).  Also cleaned up the code a mite and
% {\bf changed} the figure spacing so that if no optional section is
% given, then the figure is only followed by \cmd{\subfigbottomskip}
% and not that plus $(\cmd{\subfigcapskip}+\cmd{\strut}\hbox{height})$.
% This should make it easier to adjust spacing as desired.}
%
% \changes{v1.6}{13 May 1993}{Changed to use the \cmd{\thefigure}
% command in building the referenced label.  The old form caused a
% problem when used with the report.sty as pointed out by Andrew
% Anselmo (anselmo\@cumesb.mech.columbia.edu).  Also modified to
% restrict the scope of the subfigure \cmd{\label} to the body of the
% subfigure.  Added \cmd{\@thesubfigure} to allow a separate labeling
% of the subfigure in the figure and in the text.  By default it is
% the same as \cmd{\thesubfigure} with space appended.  Added some
% code to print the subfigure captions to the List-of-Figures file
% if desired.  Finally, added the corresponding support for subtables 
% as well as subfigures.  NOTE: the optional subcaption is now a moving
% argument and any fragile commands that appear in the subcaption must
% be preceded by a \cmd{\protect} (just like that of the \cmd{\caption}
% command).}
% 
% \changes{v2.0}{06 Mar 1995}{This version of \cmd{\subfigure} is the
% first to be ported to \LaTeXe\ (with backward compatibility to
% \LaTeX2.09).  \cmd{\subfigure} and \cmd{\subtable} are now identical
% and the environment controls internal differences between them.  Now,
% the subcaption setting portion of \cmd{\@subfloat} is broken into the
% separate commands \cmd{\@makesubfigurecaption} and
% \cmd{\@makesubtablecaption} to allow a separate hook for the
% modification of how the subcaption is constructed and to allow the
% subtable and subfigure captions to be different.  In addition, support
% of the \Lopt{normal}, \Lopt{hang}, \Lopt{center}, \Lopt{centerlast},
% \Lopt{nooneline}; \Lopt{scriptsize}, \ldots, \Lopt{Large}; \Lopt{up},
% \Lopt{it}, \Lopt{sl}, \Lopt{sc}, \Lopt{md}, \Lopt{bf}, \Lopt{rm},
% \Lopt{sf}, and \Lopt{tt} package options were added for compatibility
% with the caption.sty by H.A. Sommerfeldt.}
% 
% \changes{v2.1}{23 Jan 2002}{Upgraded to fix a \cmd{\protect} bug that
% crept in due to changes in \LaTeXe\ and to enhance the interaction
% with the ``List-of'' files.  Backward compatibility with \LaTeX2.09 is
% \textbf{not} supported.  This version allows optional subcaption
% strings for the ``List-of'' files and the companion captcont.sty
% allows further extensions.  Added check for \Lfile{subfigure.cfg} file
% for automatic configuration.  Added more options for adjustment of the
% look-and-feel of the subcaption.  Added the ability to independently
% move the float caption and subcaption before or after the figure.
% Removed extra space from the top of a figure at the top of a page and
% some accidental whitespace.  Reduced the default space around the
% figure and made it actual skips.  Updated the documentation to
% describe the new changes and to make some points more clear.}
%
% \DoNotIndex{\@@@,\@auxout,\@bsphack,\@dottedtocline,\@empty,\@esphack}
% \DoNotIndex{\@flushglue,\@for,\@gobble,\@ifnextchar,\@ifpackageloaded}
% \DoNotIndex{\@ifstar,\@ifundefined,\@minipagefalse,\@nameuse,\@ne}
% \DoNotIndex{\@rightskip,\@tempboxa,\@tempcnta,\@tempdima}
% \DoNotIndex{\@tempdimb,\@tempskipb,\@xaddvskip,\addcontentsline}
% \DoNotIndex{\addtolength,\advance,\alph,\arabic,\AtBeginDocument}
% \DoNotIndex{\AtEndOfPackage,\begingroup,\bfseries,\bgroup,\box}
% \DoNotIndex{\DeclareOption,\def,\do,\edef,\egroup,\else,\endgroup}
% \DoNotIndex{\ExecuteOption,\ExecuteOptions,\ext@figure,\ext@table}
% \DoNotIndex{\familydefault,\fi,\footnotesize,\fontfamily,\fontseries}
% \DoNotIndex{\fontshape,\gdef,\global,\hbox,\hfil,\hskip,\hss,\if@minipage}
% \DoNotIndex{\ifcase,\ifdim,\ifnum,\ifx,\ignorespaces,\InputIfFileExists}
% \DoNotIndex{\itshape,\label,\lastskip,\leftskip,\Large,\large,\leavevmode}
% \DoNotIndex{\let,\long,\m@ne,\mdseries,\multiply,\NeedsTeXFormat}
% \DoNotIndex{\newcommand,\newcounter,\newdimen,\newif,\newlabel,\newskip}
% \DoNotIndex{\noexpand,\normalsize,\numberline,\or,\p@,\par,\parbox}
% \DoNotIndex{\parfillskip,\parindent,\ProcessOptions,\protect}
% \DoNotIndex{\protected@write,\protected@edef,\providecommand}
% \DoNotIndex{\ProvidesPackage,\ref,\refstepcounter,\relax,\renewcommand}
% \DoNotIndex{\RequirePackage,\rightskip,\rmfamily,\sbox,\scriptsize}
% \DoNotIndex{\scshape,\selectfont,\seriesdefault,\setbox,\setcounter}
% \DoNotIndex{\setlength,\sffamily,\shapedefault,\slshape,\small,\space}
% \DoNotIndex{\string,\strut,\thefigure,\thepage,\thetable,\ttfamily,\tw@}
% \DoNotIndex{\typeout,\undefined,\upshape,\usebox,\vbox,\vskip,\vspace}
% \DoNotIndex{\vtop,\wd,\xdef,\z@,\z@skip}
%
% \CheckSum{787}% 
% ^ Allow a little more freedom in typesetting floats.
% \setcounter{topnumber}{8}
% \def\topfraction{.8}
% \setcounter{bottomnumber}{8}
% \def\bottomfraction{.8}
% \setcounter{totalnumber}{8}
% \def\textfraction{.2}
% \def\floatpagefraction{.8}
% \setcounter{dbltopnumber}{8}
% \def\dbltopfraction{.8}
% \def\dblfloatpagefraction{.8}
%
% ^ Add some space above any footnotes.
% \skip\footins=1.5\baselineskip
%
% \makeatletter
%
%   ^ Remove some space above minipage footnotes.
%   \skip\@mpfootins=2.6\p@
%
%   ^ Define a raggedright for use in tabular's.
%   \newcommand{\rr}{^
%     \@rightskip\@flushglue
%     \rightskip\@rightskip
%     \leftskip\z@
%     \parindent\z@}
%
%   ^ Turn off any list entries by ``eating'' any \addcontentsline stuff.
%   \newcommand*{\eatthree}[3]{}^
%   \newcommand*{\turnofflistentry}{\let\addcontentsline=\eatthree}
%
%   ^ Print text (#2) only if reference (r@#1) is defined.
%   \newcommand{\PrintIfDefined}[3]{^
%     \@bsphack
%     \@ifundefined{r@#1}{#3}{#2}^
%     \@esphack}
%
% \makeatother
%
% \def\docdate{2005/03/15}
% \def\fileversion{v2.1.5}
% \def\filedate{2002/03/15}
% \def\filename{subfigure.dtx}
%
% \title{The \Lpack{subfigure} Package\footnote{This paper documents
%        the \Lpack{subfigure} package \fileversion, last revised \filedate.}}
% \author{Steven Douglas Cochran\\[5pt]
%         Digital Mapping Laboratory, School of Computer Science \\
%         Carnegie-Mellon University, 5000 Forbes Avenue \\
%         Pittsburgh, PA 15213--3890, USA\\[5pt]
%         \texttt{sdc+@cs.cmu.edu}}
% \date{\docdate}
%
% \maketitle
%
% \begin{abstract}
% \noindent
% This article documents the \LaTeX\ package `\Lpack{subfigure}', which
% provides support for the inclusion of small, `sub', figures and
% tables.  It simplifies the positioning, captioning and labeling of
% such objects within a single \Lenv{figure} or \Lenv{table}
% environment.  In addition, this package allows such subcaptions to be
% written to a List-of-Figures or List-of-Tables if desired.  The
% `\Lpack{subfigure}' package also cooperates with the `\Lpack{caption}'
% and `\Lpack{caption2}' packages by H.A. Sommerfeldt
% \cite{Somm95a,Somm95b}, the `\Lpack{ccaption}' and `\Lpack{tocloft}'
% packages \cite{Wils01,Wils01B} by Peter Wilson, the `\Lpack{hyperref}'
% package by Sebastian Rahtz \cite{Raht02}, the `\Lpack{captcont}' package
% \cite{Coch02}, and should be compatible with all other packages that
% modify or extend the \Lenv{float} environment or the \cmd{\caption} or
% \cmd{\label} commands.
%
% \end{abstract}
%
% \newpage
% \tableofcontents
%
% \newpage
% \setcounter{lotdepth}{2}^
% \listoftables
% \setcounter{lofdepth}{2}^
% \listoffigures
%
% \newpage
% \section{Introduction}
% \enlargethispage{24pt}^finalhack
% 
% This package provides support for the manipulation and reference of
% small or `sub' figures and tables within a single \Lenv{figure} or
% \Lenv{table} environment\@.\footnote{Section~\ref{sec:customfloat}
% describes how to add support for additional \Lenv{float}
% environments.}  It is convenient to use this package when your
% subfigures are to be separately captioned, referenced, or when such
% subcaptions are to be included in the List-of-Figures.
% 
% Before using the \Lpack{subfigure} package, consider the following to
% see if you really need it.  If you simply want to center your figure,
% then you can use |\centerline|, |\centering| or the \Lenv{center}
% environment to do so.  If your figure has a short width or if you wrap
% your figure in a |\parbox| or a \Lenv{minipage} of a short width, then
% you can place multiple figures or tables side-by-side.  For example,
% the following will put two images side-by-side in a single figure as
% shown in figure~\ref{fig:1figs}:\footnote{You might have to use the
% optional position arguments `[b]' or `[t]' if the figures are of
% different heights.}
%
% \begin{verbatim}
%     \begin{figure}%
%       \centering
%       \parbox{1.2in}{...figure code...}%
%       \qquad
%       \begin{minipage}{1.2in}%
%         ...figure code...
%       \end{minipage}%
%       \caption{Here are two figures side-by-side.}%
%       \label{fig:1figs}%
%     \end{figure}
% \end{verbatim}
% \vspace{-1\baselineskip}
% \begin{figure}^
%   \abovecaptionskip=6pt^
%   \centering
%   \parbox{1.2in}{^
%     \fboxsep=-\fboxrule
%     \fbox{\hbox to 1.2in{\vbox to 15mm{\null\vfil}\hfil}}}^
%   \qquad
%   \begin{minipage}{1.2in}^
%     \fboxsep=-\fboxrule
%     \fbox{\hbox to 1.2in{\vbox to 15mm{\null\vfil}\hfil}}^
%   \end{minipage}^
%   \caption{Here are two figures side-by-side.}^
%   \label{fig:1figs}^
%   \vspace{-10pt}
% \end{figure}
% 
% \noindent
% Further, if you place the caption inside the |\parbox| or
% \Lenv{minipage}, then the width of the caption will be limited to the
% width of the parbox or minipage as shown in figures~\ref{fig:2figsA}
% and \ref{fig:2figsB}:
% 
% \begin{verbatim}
%     \begin{figure}%
%       \centering
%       \parbox{1.2in}{%
%         ...figure code...
%         \caption{First.}%
%         \label{fig:2figsA}}%
%       \qquad
%       \begin{minipage}{1.2in}%
%         ...figure code...
%         \caption{Second.}%
%         \label{fig:2figsB}%
%       \end{minipage}%
%     \end{figure}%
% \end{verbatim}
% \vspace{-\baselineskip}
% \begin{figure}^
%   \abovecaptionskip=2pt^
%   \centering
%   \parbox{1.2in}{^
%     \fboxsep=-\fboxrule
%     \fbox{\hbox to 1.2in{\vbox to 15mm{\vfil\null}\hfil}}^
%     \caption{First.}^
%     \label{fig:2figsA}}^
%   \qquad
%   \begin{minipage}{1.2in}^
%     \fboxsep=-\fboxrule
%     \fbox{\hbox to 1.2in{\vbox to 15mm{\vfil\null}\hfil}}^
%     \caption{Second.}^
%     \label{fig:2figsB}^
%   \end{minipage}^
%   \vspace{-10pt}
% \end{figure}
%
% For more information on typesetting figures and tables, see the
% document ``Using Imported Graphics in \LaTeXe'' by Keith Reckdahl
% \cite{Reck97}.
% 
% \section{The User Interface}
% \vspace{-5pt}^finalhack
% \enlargethispage{12pt}^finalhack
% 
% To use this package place
% \begin{quote}
%   |\usepackage|\oarg{options}\marg{subfigure}
% \end{quote}
% in the preamble of your document.  The supported options are shown in
% table~\ref{tab:options}.
% \DescribeMacro{\subfigure}
% \DescribeMacro{\subtable}
%  Within a \Lenv{figure} or \Lenv{table}
% environment, you can use the following commands to create a subfigure
% or subtable ``box'' with an optional subcaption underneath.
% \vspace{-2pt}
% \begin{quote}
%   |\subfigure|\oarg{list\_entry}\oarg{subcaption}\marg{figure}\\
%   |\subtable|\oarg{list\_entry}\oarg{subcaption}\marg{figure}
% \end{quote}
% \vspace{-2pt}
% 
% \noindent
% If a subcaption argument is given (including the null subcaption
% `{\ttfamily [$\;$]}') then the subfigure is labeled with a counter
% formatted by the command `|\thesubfigure|' which returns, by default,
% `(a)', `(b)', etc.  The counter used for labeling the subfigures is
% \Lcount{subfigure} and is incremented for each subfigure regardless of
% whether a subcaption was printed. The internals of the |\subtable|
% command are symmetric to those of the |\subfigure| command.  Further,
% if a List-of-Figures (or List-of-Tables) is generated, then the
% \meta{list\_entry} argument controls how the caption text is used
% there.  Table~\ref{tab:calling} shows the possibilities.
%
% \changes{v2.1.4}{30 Apr 2002}{Changed the label and caption defaults
% from \cmd{\rmfamily}\cmd{\mdseries}\cmd{\upshape} to 
% \cmd{\familydefault}\cmd{\seriesdefault} \cmd{\shapedefault}.}
% \DeleteShortVerb{\|}
% \begin{table}
%   \def\M#1{\vspace*{#1}}
%   \centering
%   \caption{\Lpack{subfigure} package options.}
%   \label{tab:options}
%   \vspace{8pt}
%   \fbox{\begin{tabular}{|p{0.36\textwidth}|p{0.63\textwidth}|} \hline
%     \multicolumn{1}{|c|}{{\large\bf\strut Option}} 
%                         & \multicolumn{1}{c|}{{\large\bf Description}}
%                                                          \\ \hline\hline
%     \Lopt{normal}       & \rr Provides `normal' subcaptions, this is the
%                           default. \\ \hline 
%     \raisebox{-1.4ex}{\Lopt{hang}, \Lopt{isu}}
%                         & \rr Causes the label to be a hanging
%                           indentation to the subcaption paragraph.
%                           (\Lopt{isu} is a synonym for \Lopt{hang}.)
%                           \\ \hline 
%     \raisebox{-1.4ex}{\Lopt{center}}
%                         & \rr Causes each line of the paragraph to be
%                           separately centered.  Overrides 
%                           \Lopt{centerlast}.\\ \hline
%     \raisebox{-1.4ex}{\Lopt{centerlast}, \Lopt{anne}}
%                         & \rr Causes the last line only to be centered.
%                           Overrides \Lopt{nooneline}.  (\Lopt{anne} is 
%                           a synonym for \Lopt{centerlast}.) \\ \hline
%     \raisebox{-2.6ex}{\Lopt{nooneline}}
%                         & \rr If a subcaption fits on one line it will, by
%                           default, be centered.  This option
%                           treats a single line like a mid-line of a
%                           multi-line caption.\\ \hline
%     \raisebox{-1.4ex}{\Lopt{raggedright}}
%                         & \rr Causes the subcaption text to be raggedright.
%                           Overrides \Lopt{center} and \Lopt{centerlast}.
%                           \\ \hline\hline
%     \Lopt{scriptsize{\rm,} footnotesize{\rm,} small{\rm,}\hfil\null\linebreak
%           normalsize{\rm,} large{\rm,} Large}
%                         & \rr Sets the font size of the subcaptions (both
%                           the label and the text), \Lopt{footnotesize}
%                           is default. \\ \hline
%     \M{1.8ex}
%     \Lopt{rm{\rm,} sf{\rm,} tt{\rm,} md{\rm,} bf{\rm,}\efill
%             up{\rm,} it{\rm,} sl{\rm,} sc{\rm,}}\hfil\null\linebreak
%     \Lopt{RM{\rm,} SF{\rm,} TT{\rm,} MD{\rm,} BF{\rm,}\efill
%             UP{\rm,} IT{\rm,} SL{\rm,} SC}
%                         & \rr The lowercase commands set the font attributes
%                           of the subcaption label.  The capitalized version
%                           sets the font attributes of the text. Family,
%                           shape and style attributes may be mixed.
%                           The default is to set the document defaults for
%                           the family, series and shape.\\ \hline\hline
%     \M{4ex}
%     \Lopt{figbotcap}{\rm,} \Lopt{tabbotcap}{\rm,}\hfil\null\linebreak
%     \Lopt{FIGBOTCAP}{\rm,} \Lopt{TABBOTCAP}
%                         & \rr Sets the figure or table numbering based on
%                           the assumption that the figure or table caption
%                           comes after the subfigures or subtables.  The
%                           capitalized version also places the subcaption
%                           after the figure (``\Lopt{FIGBOTCAP}'' and 
%                           ``\Lopt{TABBOTCAP}'' are the default settings).
%                           \\ \hline
%     \M{3.9ex}
%     \Lopt{figtopcap}{\rm,} \Lopt{tabtopcap}{\rm,}\hfil\null\linebreak
%     \Lopt{FIGTOPCAP}{\rm,} \Lopt{TABTOPCAP}
%                         & \rr Sets the figure or table numbering based on
%                           the assumption that the figure or table caption
%                           precedes the subfigures or subtables.  The
%                           capitalized version also places the subcaption
%                           before the figure (``\Lopt{TABTOPCAP}'' is the 
%                           preferred table setting, see 
%                           section~\ref{sec:position} for details).
%                           \\ \hline\hline
%     \M{2.6ex}
%     \Lopt{loose}{\rm,} \Lopt{tight}
%                         & \rr The (default) \Lopt{loose} option sets the
%                           historically normal whitespace around the subfloat.
%                           The \Lopt{tight} option sets less space around the 
%                           subfigure (this is the preferred setting).
%                           \\ \hline
%   \end{tabular}}%
% \end{table}
% \MakeShortVerb{\|}
%
% \begin{table}
%   \centering
%   \caption{\cmd{\subfigure} calling arguments.}
%   \label{tab:calling}
%   \begingroup\small
%   \begin{tabular}{llc}                                      \\ \hline
%     {\normalsize Subfigure Command}
%                       & {\normalsize LoF/LoT}
%                             & \multicolumn{1}{r}{\hbox to .25in{%
%                                                    \hss\normalsize 
%                                                    Subfigure Caption}}
%                                                             \\ \hline
%     \cmd{\subfigure}\{\dots fig\dots\}
%                       &     &                               \\
%     \cmd{\subfigure}[~]\{\dots fig\dots\}
%                       & (b)\ \ . . . . . . . . . .  
%                             & (b)                           \\
%     \cmd{\subfigure}[Subcaption.]\{\dots fig\dots\}
%                       & (c) Subcaption. . . .
%                             & (c) Subcaption.               \\
%     \cmd{\subfigure}[\space][Subcaption.]\{\dots fig\dots\}
%                       &     & (d) Subcaption.               \\
%     \cmd{\subfigure}[\space][\space]\{\dots fig\dots\}
%                       &     & (e)                           \\
%     \cmd{\subfigure}[List\_entry.][Subcaption.]\{\dots fig\dots\}
%                       & (f) List\_entry. . . .
%                             & (f) Subcaption.               \\
%     \cmd{\subfigure}[List\_entry.][~]\{\dots fig\dots\}
%                       & (g) List\_entry. . . .
%                             & (g)                           \\ \hline
%   \end{tabular}
%   \endgroup
%   \vspace{-8pt}
% \end{table}
% 
% If you wish to reference a specific subfigure or subtable, you can
% include a |\label| inside the body of either the \meta{subcaption} or
% \meta{figure} argument to the command (but not the \meta{list\_entry}
% argument).  If supplied by itself, the \meta{subcaption} is a ``moving
% argument''\footnote{See \cite[\textsection~4.7 and
% \textsection~C.1.3]{Lamp94} for a more detailed description of
% ``moving arguments'' and ``fragile'' commands.} and, therefore, any
% ``fragile'' commands contained within it must be |\protect|'ed.  If
% the \meta{list\_entry} argument is supplied, then the
% \meta{subcaption} is not a ``moving argument''; however, the
% \meta{list\_entry} is.
% 
% {\bf Note:} since the |\subfigure| and |\subtable| commands have optional
% arguments, delimited with square brackets, before their required argument,
% you cannot use the `]' character at the top level of either the
% \meta{subcaption} or \meta{list\_entry} argument.  To overcome this
% problem, you must wrap the portion of the text containing the `]'
% character (or the entire argument), in a pair of curly brackets (see
% \cite[\textsection~C.1.1]{Lamp94} for more detail).  For example:
% 
% \begin{verbatim}
%   \subfigure[This does not $sqrt[3]{8}$ work.]{... figure text ...}
%   \subfigure[This works {$sqrt[3]{8}$} fine.]{... figure text ...}
%   \subfigure[{This also works $sqrt[3]{8}$ fine.}]{... figure text ...}
% \end{verbatim}
% 
% One final note, the |\subfigure| and |\subtable| commands are
% actually identical and it is the surrounding environment that defines 
% actually identical and it is the surrounding environment that defines 
% whether a subtable or subfigure will be generated and not which command 
% is used.  At the user level, the choice of names is purely cosmetic
% (and historical).  Therefore you can use |\subfigure| for any float
% ({\it e.g.\/}, \Lenv{figure}, \Lenv{table}, or other) environment. 
%
% \subsection{Format Options}
% \label{sec:format}
%
% There are six options for formatting the layout of the caption label
% and text.  The first is \Lopt{normal}, which produces the style shown
% in figure~\ref{fig:format-01}.  The other options may be used in
% various combinations to produce the layouts shown in
% figures~\ref{fig:format-02} thru \ref{fig:format-14}.  Note that some
% combinations, like \Lopt{center} and \Lopt{centerlast} do not make
% sense since \Lopt{center} overrides \Lopt{centerlast}.  Also, 
% \Lopt{nooneline}, when combined with either \Lopt{center} or
% \Lopt{centerlast} has no effect (unless the \Lopt{hang} option is 
% also set); and, \Lopt{raggedright} overrides both \Lopt{center} and
% \Lopt{centerlast}.
% 
% \begingroup
% \def\sc{Short.}
% \def\lc{This is a long caption of gibberish: Aafas d taed 
%         gaihgghn adf irin sadf aets etsd na.}
% \def\b{\fboxsep=-\fboxrule
%        \fbox{\hbox to 2.0in{\vbox to 2mm{\vfil\null}\hfil}}}
% \def\g{\hspace{.5in}}
% \subfigtopskip=20pt
% \subfigcapskip=-3pt
% \subfigbottomskip=0pt
% \abovecaptionskip=5pt
% \begin{figure}^
%   \centering
%   \turnofflistentry
%   \subcaphangfalse
%   \subcapcenterfalse
%   \subcapcenterlastfalse
%   \subcapnoonelinefalse
%   \subcapraggedrightfalse
%   \subfigure[\sc]{\b}\g\subfigure[\lc]{\b}\\
%   \caption{Format option [\Lopt{normal}].}^
%   \label{fig:format-01}^
%   \subcapnoonelinetrue
%   \subfigure[][\sc]{\b}\g\subfigure[][\lc]{\b}\\
%   \caption{Format option [\Lopt{nooneline}].}^
%   \label{fig:format-02}^
%   \subcapcenterlasttrue
%   \subcapnoonelinefalse
%   \subfigure[][\sc]{\b}\g\subfigure[][\lc]{\b}\\
%   \caption{Format option [\Lopt{centerlast}]; \Lopt{centerlast} overrides
%            \Lopt{nooneline}.\footnotemark}
%   \label{fig:format-03}^
%   \subcapcentertrue
%   \subcapcenterlastfalse
%   \subfigure[][\sc]{\b}\g\subfigure[][\lc]{\b}\\
%   \caption{Format option [\Lopt{center}]; \Lopt{center} overrides 
%            \Lopt{nooneline} and \Lopt{centerlast}.}^
%   \label{fig:format-04}^
%   \subcaphangtrue
%   \subcapcenterfalse
%   \subfigure[][\sc]{\b}\g\subfigure[][\lc]{\b}\\
%   \caption{Format option [\Lopt{hang}].}
%   \label{fig:format-05}
%   \subcapnoonelinetrue
%   \subfigure[][\sc]{\b}\g\subfigure[][\lc]{\b}\\
%   \caption{Format options [\Lopt{hang},\Lopt{nooneline}].}
%   \label{fig:format-06}
%   \subcapcenterlasttrue
%   \subcapnoonelinefalse
%   \subfigure[][\sc]{\b}\g\subfigure[][\lc]{\b}\\
%   \caption{\Lpack{Subfigure}\ format options [\Lopt{hang},^
%            \Lopt{centerlast}].}
%   \label{fig:format-07}
%   \vspace{2\baselineskip}
%   \begin{minipage}{\linewidth}
%      \footnotetext{\raise1ex\hbox to 0pt{\hss\tiny\thefootnote}^
%       So this is the same as [\Lopt{centerlast},\Lopt{nooneline}].  Only
%       the shortest number of options to achieve an effect is shown.
%       Adding any combination of overridden options has no effect.}
%   \end{minipage}
% \end{figure}
% 
% \begin{figure}
%   \turnofflistentry
%   \centering
%   \subcaphangtrue
%   \subcapcenterfalse
%   \subcapcenterlasttrue
%   \subcapnoonelinetrue
%   \subcapraggedrightfalse
%   \subfigure[][\sc]{\label{fig:format-08A}\b}\g\subfigure[][\lc]{\b}\\
%   \caption{Format options [\Lopt{hang},\Lopt{centerlast},\Lopt{nooneline}].}
%   \label{fig:format-08}
%   \subcapcentertrue
%   \subcapcenterlastfalse
%   \subcapnoonelinefalse
%   \subfigure[][\sc]{\b}\g\subfigure[][\lc]{\b}\\
%   \caption{Format options [\Lopt{hang},\Lopt{center}]; 
%            \Lopt{center} overrides \Lopt{centerlast}.}
%   \label{fig:format-09}
%   \subcapnoonelinetrue
%   \subfigure[][\sc]{\label{fig:format-10A}\b}\g\subfigure[][\lc]{\b}\\
%   \caption{Format options [\Lopt{hang},\Lopt{center},\Lopt{nooneline}];
%            \Lopt{center} overrides \Lopt{centerlast}.}
%   \label{fig:format-10}
%   \subcaphangfalse
%   \subcapcenterfalse
%   \subcapnoonelinefalse
%   \subcapraggedrighttrue
%   \subfigure[][\sc]{\b}\g\subfigure[][\lc]{\b}\\
%   \caption{Format option [\Lopt{raggedright}];
%            \Lopt{raggedright} overrides \Lopt{center} and \Lopt{centerlast}.}
%   \label{fig:format-11}
%   \subcapnoonelinetrue
%   \subfigure[][\sc]{\b}\g\subfigure[][\lc]{\b}\\
%   \caption{Format options [\Lopt{raggedright},\Lopt{noonelirne}]; 
%            \Lopt{raggedright} overrides \Lopt{center} and \Lopt{centerlast}.}
%   \label{fig:format-12}
%   \subcaphangtrue
%   \subcapnoonelinefalse
%   \subfigure[][\sc]{\b}\g\subfigure[][\lc]{\b}\\
%   \caption{Format options [\Lopt{hang},\Lopt{raggedright}];
%            \Lopt{raggedright} overrides \Lopt{center} and \Lopt{centerlast}.}
%   \label{fig:format-13}
%   \subcapnoonelinetrue
%   \subfigure[][\sc]{\label{fig:format-14A}\b}\g\subfigure[][\lc]{\b}\\
%   \caption{\Lpack{Subfigure}\ format options [\Lopt{hang},\Lopt{raggedright},
%            \Lopt{nooneline}]; \Lopt{raggedright} overrides \Lopt{center}
%            and \Lopt{centerlast}.}
%   \label{fig:format-14}
% \end{figure}
% \endgroup
%
% \addtocontents{lof}{^
%   \string\contentsline
%     {figure}
%     {\numberline{\ref{fig:format-01}--\ref{fig:format-14}}^
%      {\ignorespaces \Lpack{Subfigure}\ format options.}}^
%      {\pageref{fig:format-01}--\pageref{fig:format-14}}}
% 
% \subsection{Font Size and Style Options}
% \label{sec:font}
% 
% There are twenty-four options for setting the font of the subcaption.
% The first six set the size of both the subcaption label and text.
% They are: \Lopt{scriptsize}, \Lopt{footnotesize} (default),
% \Lopt{small}, \Lopt{normalsize}, \Lopt{large}, and \Lopt{Large}.
% Their effect is shown in figure~\ref{fig:font1}.
% 
% The next nine, \Lopt{rm}: \Lopt{sf}, \Lopt{tt}, \Lopt{md}, \Lopt{bf},
% \Lopt{up}, \Lopt{it}, \Lopt{sl}, and \Lopt{sc}, set the family, series
% or shape of the subcaption label, as shown in
% figures~\ref{fig:font2A}--~\ref{fig:font2I}.  The last nine:
% \Lopt{RM}, \Lopt{SF}, \Lopt{TT}, \Lopt{MD}, \Lopt{BF}, \Lopt{UP},
% \Lopt{IT}, \Lopt{SL}, and \Lopt{SC}, do the same for the text of the
% subcaption, as shown in figure~\ref{fig:font2J}--\ref{fig:font2R}.
% These size and style options may be combined in 3456 ways to set the
% label and text of the subcaption (as long as the selected font
% combination exists\@!)  The font family for the text and label may be
% set as roman (\Lopt{rm}/\Lopt{RM}), sans serif (\Lopt{sf}/\Lopt{SF}),
% and typewriter (\Lopt{tt}/\Lopt{TT}).  These may be combined with
% those for the font series, medium (\Lopt{md}/\Lopt{MD}) and bold
% (\Lopt{bf}/\Lopt{BF}); and the font shape, upright
% (\Lopt{up}/\Lopt{UP}), italic (\Lopt{it}/\Lopt{IT}), slanted
% (\Lopt{sl}/\Lopt{SL}), and small caps (\Lopt{sc}/\Lopt{SC}).
% 
% \begin{figure}^
%   \def\b{\fboxsep=-\fboxrule
%          \fbox{\hbox to 2.0in{\vbox to 2mm{\vfil\null}\hfil}}}^
%   \subfigtopskip=8pt^
%   \subfigcapskip=0pt^
%   \subfigbottomskip=4pt^
%   \centering
%   {\renewcommand{\subcapsize}{\scriptsize}^
%    \subfigure[][Font option {[scriptsize]}.]{\b}}\qquad
%   {\renewcommand{\subcapsize}{\footnotesize}^
%    \subfigure[][Font option {[footnotesize]}.]{\b}}\\
%   {\renewcommand{\subcapsize}{\small}^
%    \subfigure[][Font option {[small]}.]{\b}}\qquad
%   {\renewcommand{\subcapsize}{\normalsize}^
%    \subfigure[][Font option {[normalsize]}.]{\b}}\\
%   {\renewcommand{\subcapsize}{\large}^
%    \subfigure[][Font option {[large]}.]{\b}}\qquad
%   {\renewcommand{\subcapsize}{\Large}^
%    \subfigure[][Font option {[Large]}.]{\b}}%
%   \caption[\Lpack{Subfigure} font size options.]{%
%            \Lpack{Subfigure} font size options.  (Default:
%            \Lopt{footnotesize}).}^
%   \label{fig:font1}^
% \end{figure}
%
% \begin{figure}^
%   \def\b{\fboxsep=-\fboxrule
%          \fbox{\hbox to 2.0in{\vbox to 2mm{\vfil\null}\hfil}}}^
%   \subfigtopskip=8pt^
%   \subfigcapskip=0pt^
%   \subfigbottomskip=4pt^
%   \centering
%   \begin{minipage}{2.0in}^
%     {\renewcommand{\subcaplabelfont}{\rmfamily}^
%      \subfigure[][Subcaption label font option {[\Lopt{rm}]}.]{\b^
%        \label{fig:font2A}}}\\
%     {\renewcommand{\subcaplabelfont}{\sffamily}^
%      \subfigure[][Subcaption label font option {[\Lopt{sf}]}.]{\b}}\\
%     {\renewcommand{\subcaplabelfont}{\ttfamily}^
%      \subfigure[][Subcaption label font option {[\Lopt{tt}]}.]{\b}}\\
%     {\renewcommand{\subcaplabelfont}{\mdseries}^
%      \subfigure[][Subcaption label font option {[\Lopt{md}]}.]{\b}}\\
%     {\renewcommand{\subcaplabelfont}{\bfseries}^
%      \subfigure[][Subcaption label font option {[\Lopt{bf}]}.]{\b}}\\
%     {\renewcommand{\subcaplabelfont}{\upshape}^
%      \subfigure[][Subcaption label font option {[\Lopt{up}]}.]{\b}}\\
%     {\renewcommand{\subcaplabelfont}{\itshape}^
%      \subfigure[][Subcaption label font option {[\Lopt{it}]}.]{\b}}\\
%     {\renewcommand{\subcaplabelfont}{\slshape}^
%      \subfigure[][Subcaption label font option {[\Lopt{sl}]}.]{\b}}\\
%     {\renewcommand{\subcaplabelfont}{\scshape}^
%      \subfigure[][Subcaption label font option {[\Lopt{sc}]}.]{^
%        \label{fig:font2I}\b}}\\
%   \end{minipage}^
%   \qquad
%   \begin{minipage}{2.0in}^
%     {\renewcommand{\subcapfont}{\rmfamily}^
%      \subfigure[][Subcaption font option {[\Lopt{RM}]}.]{^
%        \label{fig:font2J}\b}}\\
%     {\renewcommand{\subcapfont}{\sffamily}^
%      \subfigure[][Subcaption font option {[\Lopt{SF}]}.]{\b}}\\
%     {\renewcommand{\subcapfont}{\ttfamily}^
%      \subfigure[][Subcaption font option {[\Lopt{TT}]}.]{\b}}\\
%     {\renewcommand{\subcapfont}{\mdseries}^
%      \subfigure[][Subcaption font option {[\Lopt{MD}]}.]{\b}}\\
%     {\renewcommand{\subcapfont}{\bfseries}^
%      \subfigure[][Subcaption font option {[\Lopt{BF}]}.]{\b}}\\
%     {\renewcommand{\subcapfont}{\upshape}^
%      \subfigure[][Subcaption font option {[\Lopt{UP}]}.]{\b}}\\
%     {\renewcommand{\subcapfont}{\itshape}^
%      \subfigure[][Subcaption font option {[\Lopt{IT}]}.]{\b}}\\
%     {\renewcommand{\subcapfont}{\slshape}^
%      \subfigure[][Subcaption font option {[\Lopt{SL}]}.]{\b}}\\
%     {\renewcommand{\subcapfont}{\scshape}^
%      \subfigure[][Subcaption font option {[\Lopt{SC}]}.]{^
%        \label{fig:font2R}\b}}^
%   \end{minipage}^
%   \caption[\Lpack{Subfigure} font style options.]{%
%           \Lpack{Subfigure} font style options. (Default:
%           \Lopt{rm,md,up,RM,MD,UP}).  Note: The above single options
%           are loaded after the default settings and multiple options are
%           allowed, see the text, section~\ref{sec:font}.}^
%   \label{fig:font2}^
% \end{figure}
% 
% \subsection{Caption Position Options}
% \enlargethispage{12pt}^finalhack
% \label{sec:position}
% 
% There are eight options that control the {\em position\/} of the
% subcaption and how the subcaption {\em numbering\/} is related to the
% ``containing'' figure or table's caption.  The following shows only
% the subfigure-related options, but the subtable options are symmetric.
% 
% The first option, \Lopt{figbotcap} tells the subfigure command that
% the ``containing'' figure's |\caption| occurs {\bf after} the
% subfigures.  This information is needed to decide if the current
% figure counter shows the number for the last figure (\Lopt{figbotcap})
% or for the current one (\Lopt{figtopcap}, see below).
% 
% The second option, \Lopt{figtopcap} tells the subfigure command that
% the ``containing'' figure's |\caption| occurs {\bf before} the
% subfigures.  The subcaption is automatically placed below the figure
% for each of these options.
% 
% The third option, \Lopt{FIGBOTCAP}, is similar to \Lopt{figbotcap},
% except that it also forces the subcaption to be placed under the
% figure.  This is the default setting for figures (and \Lopt{TABBOTCAP}
% for tables) and is shown in figure~\ref{fig:position1}.
% 
% The fourth option, \Lopt{FIGTOPCAP}, is similar to \Lopt{figtopcap},
% except that it forces the subcaption to be placed above the figure
% box.  (While not the default, it is the preferred format for tables,
% which uses the option \Lopt{TABTOPCAP}\@.)  An example of this option
% is shown in figure~\ref{fig:position2}.  Note that the baseline of the
% subfigure is along the top of the two subfigures.  See
% section~\ref{sec:custom-position} for another way of positioning the
% caption when captions are placed above the figure or table.
% 
% \begin{figure}^
%   \subfigtopskip=8pt^
%   \subfigcapskip=0pt^
%   \subfigbottomskip=4pt^
%   \abovecaptionskip=5pt^
%   \centering
%   \subfigure[First caption.]{^
%     \fbox{\hbox to 1.5in{\vbox to 15mm{\vfil\null}\hfil}}}^
%   \hspace{0.2in}^
%   \subfigure[Second long, long, long, long, long, long, caption.]{^
%     \fbox{\hbox to 1.5in{\vbox to 10mm{\vfil\null}\hfil}}}^
%   \caption{Subcaption position option [\Lopt{FIGBOTCAP}].} 
%   \label{fig:position1}^
% \end{figure}
%
% \begin{figure}^
%   \subfigtopskip=8pt^
%   \subfigcapskip=0pt^
%   \subfigbottomskip=0pt^
%   \belowcaptionskip=5pt^
%   \caption{Subcaption position option: [\Lopt{FIGTOPCAP}].}^
%   \label{fig:position2}^
%   \centering
%   \figuretopcaptrue
%   \subfiguretopcaptrue
%   \subfigure[First caption.]{^
%     \fbox{\hbox to 1.5in{\vbox to 15mm{\vfil\null}\hfil}}}^
%   \hspace{0.2in}^
%   \subfigure[Second long, long, long, long, long, long caption.]{^
%     \fbox{\hbox to 1.5in{\vbox to 10mm{\vfil\null}\hfil}}}^
%   \setcounter{subfigure}{0}^
%   \vspace{-18pt}
% \end{figure}
%
% \subsection{Recent Changes and Backward Compatibility}
% \enlargethispage{24pt}^finalhack
% \label{sec:back-compat}
% 
% There are some significant changes in this version of the
% \Lpack{subfigure} package.  One of them was to pack the subfigure
% tighter together by removing the space at the top of the subfigure at
% the beginning of a page, or minipage, and to reduce the spacing around
% the subfigure, see table~\ref{tab:spacing}.  If you have been using an
% older version of the \Lpack{subfigure} package ({\it i.e.\/}, version
% 2.0 or eariler) than the default (\Lopt{loose}) setting will not cause
% any change in your existing documents.\footnote{If you have been using
% a beta release version of \Lpack{subfigure} 2.1, than you will need to 
% use the \Lopt{tight} option in order to maintain the ``look-and-feel'' 
% that you are used to.}
% 
% If you want to use the new and preferred, \Lopt{tight} option, your
% subfigures will take up less space and should provide a more balanced
% visual appearance for your paper.
% 
% The second significant change is the ability to make the text on the
% List-of-Figures page different than that in the subcaption.  The use
% of a second optional argument to the |\subfigure| command is shown in
% table~\ref{tab:calling}.  This should not cause any compatibility
% problems.
% 
% The third significant change is the it is now possible to have the
% captions and subcaptions come before or after the corresponding
% figure/table portion.  While the default settings support the old view
% of the subcaptions following the figure/table and, in turn, followed
% by the main caption.  The preferred format is for figures to retain
% that layout and for tables to have both their subcaption and main
% captions come before the table portion.  This preferred setting may be
% specified by adding the option \Lopt{TABTOPCAP} when loading the
% \Lpack{subfigure} package.
% 
% The fourth update is that the font style options have been generalized
% so that an option from each of the family, series and shape, may be
% combined, as long as that combination exists; and you can set the font
% of the label and text separately.  In addition, the the |\space| that
% separated the label from the text in the subcaption has been replaced
% with a horizontal skip of |\subfiglabelskip| which has the default
% value of |0.33em plus 0.07em minus 0.03em|.  This extension should not
% cause any compatibility problems.
% 
% The last major change is that there is now a |\subref| command that
% allows a reference to the subfigure without the figure number.  An
% example of the use of this command is shown later in
% section~\ref{sec:ex3}.  Associated with this change is that the
% |\label| command will accept an optional argument, for use with the
% \Lpack{hyperref} package, when used within the scope of the
% |\subfigure| or |\subtable|, see section~\ref{sec:hyperref} for details.
% 
% \DeleteShortVerb{\|}
% \MakeShortVerb{\/}
% \begin{table}^
%   \def\pz{\phantom{0}}^
%   \centering
%   \caption{\Lpack{Subfigure} spacing changes.}^
%   \label{tab:spacing}^
%   \vspace{4pt}^
%   \begin{tabular}{|l|c|c|c|}         \hline
%     \multicolumn{1}{|c|}{\bf{\Lpack{subfigure}}}
%                         & \multicolumn{1}{c|}{{\bf Old (v2.0)}} 
%                                & \multicolumn{1}{c|}{\bf\Lopt{loose}}
%                                      & \multicolumn{1}{c|}{\bf\Lopt{tight}} \\
%     \multicolumn{1}{|c|}{{\bf Constant}} 
%                         & \multicolumn{1}{c|}{{\bf Value}} 
%                                & \multicolumn{1}{c|}{{\bf Option}}
%                                          & \multicolumn{1}{c|}{{\bf Option}}
%                                                  \\ \hline
%     /\subfigtopskip/    & 10 pt &  10 pt  & 5 pt \\
%     /\subfigcapskip/    & 10 pt &  10 pt  & 0 pt \\
%     /\subfigcaptopadj/  &  |    &\pz0 pt  & 3 pt \\
%     /\subfigbottomskip/ & 10 pt &  10 pt  & 5 pt \\
%     /\subfigcapmargin/  & 10 pt &  10 pt  & 0 pt \\
%     /\subfiglabelskip/  &  |    & 0.33 em & 
%                                  \vtop{\hbox to 1.2in{0.33 em plus 0.07 em}
%                                        \hbox to 1.2in{\hfill minus 0.03 em}}
%                                               \\[8pt] \hline
%   \end{tabular}^
% \end{table}
% \DeleteShortVerb{\/}
% \MakeShortVerb{\|}
% 
% The \Lpack{subfigure} package checks for and loads a configuration
% file called \Lfile{subfigure.cfg} which is placed anywhere that \LaTeX\
% will look for classes or packages (see
% section~\ref{sec:customization}).  By default, the \Lfile{subfigure.sty}
% file tries to look unchanged from older versions.  In order to
% have it automatically use the preferred settings, you can add a
% configuration file containing the options \Lopt{tight} to reduce the
% extra whitespace around the subfigures and \Lopt{TABTOPCAP} to show
% that table captions will come before the table and the the subcaptions
% for tables should be set above the subtable.  The following line is all 
% you need in your configuration file:
% 
% \iffalse
%<*newconf>
% \fi
%    \begin{macrocode}
\ExecuteOptions{tight,TABTOPCAP}
%    \end{macrocode}
% \iffalse
%</newconf>
% \fi
% 
% You could also load the subfigure package with the options with the
% following in your \LaTeX\ preamble:
% \begin{quote}
%   |\usepackage[tight,TABTOPCAP]{subfigure}|
% \end{quote}
% 
% \subsection{Frequently Asked Questions}
% \label{sec:faq}
% 
% The four most frequently asked questions about the \Lpack{subfigure}
% package are:
% 
% \begin{enumerate}
%   \item ``My subfigures are not aligned along their bottoms. Why?''
% 
%     Remember! The \Lpack{subfigure} package aligns subfigure along
%     their baselines with the subcaption (if any) sticking out above or
%     below.  The above problem is usually due to using a \Lenv{minipage},
%     \Lenv{tabular} or \Lenv{array} environment that, by default,
%     places the baseline at the center of the box that it generates.
%     If the two subfigures are different sizes, or if one subfigure is
%     generated in some other way with its baseline not at the expected
%     place (perhaps an |\includegraphics|), then the subfigures will be
%     misaligned.  One solution is to use the environment options `[t]'
%     or `[b]' to move the baseline to the top or bottom rather than the
%     center.
% 
%   \item ``How can I get my figures/subfigures to line up the way I want?''
% 
%     A similar question, but this one is caused by extra whitespace in
%     the source text generating spaces next to the figures, and |\par|'s
%     generated by blanklines.  The main thing is {\it be aware\/} that 
%     extra whitespace can move figures and subfigures around, sometimes 
%     a lot and sometimes just a little so that they look ``wrong''.  
%     Placing too many `\%'s at the end of the lines is better than too 
%     few in the figure and table environments.  (See the discussion of 
%     ``white space'' in section~\ref{sec:examples}.)
% 
%   \item ``I have too many subfigures for one page, How can I spread
%           them over two or more pages and continue the numbering?''
%     \begin{description}
%       \item[Option 1:] Adjust the \Lcount{figure} and \Lcount{subfigure}
%                        counters (or the \Lcount{table} and 
%                        \Lcount{subtable} counters) as needed before and
%                        after each figure (or table) See, for example 
%                        \emph{Using Imported Graphics in \LaTeXe}
%                        \cite[\textsection~30]{Reck97}.
%       \item[Option 2:] Use the \Lpack{ccaption} package by Peter Wilson 
%                        \cite{Wils01}.
%       \item[Option 3:] Use the simpler \Lpack{captcont} package by
%                        Steven Cochran \cite{Coch02}.
%     \end{description}
%     All of these options work well.  Of the packages, the 
%     \Lpack{ccaption} package is bigger and offers more control over 
%     what is done (and things to do) at the expense of being a little 
%     harder to use.  The \Lpack{captcont} package is easier to use, 
%     but only provides for continued floats.
% \newpage^finalhack
%   \item ``Why do I get a garbled caption or an error when I use
%           square brackets?''
% \vspace{-2pt}
% \begin{verbatim}
%   \subfigure[SHIFT: ``register[3] $<<=$ 3;'']{... figure text ...}
% \end{verbatim}
% \vspace{-12pt}
%     Since the |\subfigure| and |\subtable| commands have optional 
%     arguments, delimited with square brackets, before their required
%     argument, you cannot use the `]' character at the top level of
%     either the \meta{subcaption} or \meta{list\_entry} argument.  To
%     overcome this problem, you must wrap all or the portion of the text
%     containing the `]' character, in a pair of curly brackets
%     (see \cite[\textsection~C.1.1]{Lamp94} for more detail). For example:
% \begin{verbatim}
%   \subfigure[SHIFT: ``register{[3]} $<<=$ 3;'']{... figure text ...}
% \end{verbatim}
% \vspace{-16pt}
% \noindent
% or
% \vspace{-4pt}
% \begin{verbatim}
%   \subfigure[{SHIFT: ``register[3] $<<=$ 3;''}]{... figure text ...}.
% \end{verbatim}
% \vspace{-12pt}
% \end{enumerate}
% 
% \section{Three Examples}
% \label{sec:examples}
% 
% The easiest way to show the use of this package is to give a few
% examples.  The two most important things to remember when working
% with the \Lpack{subfigure} package are that (1) the subfigures are
% aligned along their baselines (see figure~\ref{fig:layout} and
% section~\ref{sec:customlayout}) and (2) that whitespace in the
% \Lenv{figure} environment are significant and affect the layout.
% 
% The baseline of the subfigure is usually at the bottom of the
% subfigure or (when the subcaption appears at the top) at the bottom of
% the subcaption {\em and\/} the |\subfigcapskip| space---which is usually
% the same as the top of the subfigure.  However sometimes, especially
% when using the \Lenv{tabular}, \Lenv{array}, or \Lenv{minipage} 
% environments to build the figure, the baseline appears elsewhere.  The 
% above environments are all aligned at their center by default but that 
% may be changed with the optional `{\bf [t]}' or `{\bf [b]}' arguments.  
% As a last resort you can wrap all of your figures in a |\vtop| box with 
% a |\vbox to 0pt{\null}| at the top followed by the figure.
% 
% If your figure is not quite centered or where you want it to be, the
% problem is often a space character being placed to one side or the
% other of the figure.  Some general rules of thumb are:\footnote{See
% chapters 7 and 8 of ``The \TeX book'' \cite{Knut86} for details.}
% \begin{itemize}\itemsep0pt
%   \item Two end-of-lines following each other (ignoring any
%         whitespace) are turned into a |\par| or paragraph break.
%   \item Multiple whitespace (including the end-of-line) are
%         compressed into a single space.
%   \item The spaces after a macro command name ({\it e.g.\/}, |\foo|) 
%         are ignored.
%   \item A `\%' character at the end of the line suppresses the
%         end-of-line and all of the spaces (if any) at the
%         beginning of the next line.
% \end{itemize}
% 
% To suppress significant extra whitespace, you can add some `\%'
% characters at the end of each line that doesn't end with a command name.
% This is more than is required, but extra `\%' usually don't cause a
% problem.
% 
% The other case where things are not correctly centered is when the
% subfigure uses only the label for the subcaption.  This is often the
% case when the description for each subfigure is given in the figure
% caption rather than in each subcaption.  In this case, the default
% label has the form `(a)\ \ ' where the trailing space is defined by
% |\subfiglabelskip|.  In this case the style should redefine this space
% as `0pt' so that the label is perfectly centered (see 
% section~\ref{sec:ex3}, below for an example).
% 
% \subsection{A Simple Example}
% \enlargethispage{12pt}
% 
% The first example, shown in figure~\ref{3figs}, specifies |\centering|
% \DescribeMacro{\subfigure}
% to horizontally center the set of subfigures, and uses |\\| and 
% some horizontal space (using |\qquad|) to control the placement of 
% the subfigures.  Note that the alignment of the top two subfigures
% is along the bottom of the figure portion of each.
% 
% \begin{figure}^
%   \centering
%   \fboxsep=-\fboxrule
%   \fbox{^  
%     \begin{minipage}{4.0in}^
%       \vspace{10pt}^
%       \centering
%       \begin{minipage}{3.5in}^
%         \subfigtopskip=3pt^
%         \subfigcapskip=-2pt^
%         \subfigbottomskip=5pt^
%         \subfigcapmargin=3pt^
%         \abovecaptionskip=5pt^
%         \centering
%           \subfigure[First.]{^
%             \fbox{\hbox to 20mm{\vbox to 15mm{\vfil\null}\hfil}}}\qquad
%           \subfigure[Second figure.]{^
%             \fbox{\hbox to 20mm{\vbox to 10mm{\vfil\null}\hfil}}}\\[6pt]
%           \subfigure[Third.]{\label{3figs-c}^
%             \fbox{\hbox to 20mm{\vbox to 10mm{\vfil\null}\hfil}}}\\
%           \caption{Three subfigures.}^
%           \label{3figs}^
%           \rr
%           \vspace{15pt}^
%           Figure~\ref{3figs} contains two top `subfigures' and
%           figure~\ref{3figs-c}.$\!$\footnotemark
%         \end{minipage}^
%       \vspace{4pt}^
%     \end{minipage}}
%   \vspace{-5pt}^
% \end{figure}
% \footnotetext{In this and later boxed figures, the boxes are intended to
% represent a portion of the page in which the figure occurs.  This is
% usually to show the figure along with some text or to show the effect
% of some option on multiple pages.}
%
% \begin{verbatim}
%   \begin{figure}%
%     \centering
%     \subfigure[First.]{...}\qquad
%     \subfigure[Second figure.]{...}\\
%     \subfigure[Third.]{\label{3figs-c}...}%
%     \caption{Three subfigures.}
%     \label{3figs}
%   \end{figure}
%   ...
%   Figure~\ref{3figs} contains two top `subfigures' and
%   figure~\ref{3figs-c}.
% \end{verbatim}
%
% \subsection{A More Advanced Example}
% 
% A second example, shown in figure~\ref{fig:ex2}, demonstrates how to
% change the subfigure labels and have the subfigure captions printed in
% the List-of-Figures.
% 
% The first |\renewcommand| changes the reference to |\thesubfigure| to
% return both the figure number and the subfigure number separated with
% a period.  The next two |\renewcommand|'s turn off the |\p@subfigure|
% (since it is now included in |\thesubfigure| and adds the colon and
% space to the subfigure label.  Later in the file, the
% \Lcount{lofdepth} is set to ``2'' so allow the subfigure captions to
% show and the |\listoffigures| is loaded.  Finally, the \Lenv{figure}
% is defined and a little following text is given that refers to it.
% 
% \begin{verbatim}
%   \renewcommand{\thesubfigure}{\thefigure.\arabic{subfigure}}
%   \makeatletter
%     \renewcommand{\p@subfigure}{}
%     \renewcommand{\@thesubfigure}{\thesubfigure:\hskip\subfiglabelskip}
%   \makeatother
%   ...
%   \setcounter{lofdepth}{2}
%   \listoffigures
%   ...
%   \begin{figure}%
%     \centering
%     \subfigure[First.]{%
%       \label{fig:first}%
%       ...}%
%     \qquad
%     \subfigure[Second.]{%
%       \label{fig:second}%
%       ...}%
%     \caption{Two subfigures.}
%   \end{figure}                  
%   ...
%   See figures~\ref{fig:first} and \ref{fig:second}.
% \end{verbatim}%
% 
% \begin{figure}^
%   \centering
%   \fboxsep=-\fboxrule
%   \renewcommand{\thesubfigure}{\thefigure.\arabic{subfigure}}^
%   \makeatletter
%     \renewcommand{\p@subfigure}{}^
%     \renewcommand{\@thesubfigure}{\thesubfigure:\hskip\subfiglabelskip}^
%   \makeatother
%   \fbox{^
%     \begin{minipage}{4.0in}^
%       \centering
%       \begin{minipage}{3.5in}^
%         \setcounter{lofdepth}{2}^
%         \vspace{.1in}^
%         \section*{ List of Figures}^
%         \vspace{-15pt}^
%         \hspace{40pt}\dots
%         \vspace{3pt}^
%         \contentsline{figure}{\numberline{\ref{fig:ex2}}^
%                      {\ignorespaces Two subfigures.}}{\pageref{fig:ex2}}^
%         \contentsline{subfigure}{\numberline{\ref{fig:first}}^
%                      {\ignorespaces First.}}{\pageref{fig:first}}^
%         \contentsline{subfigure}{\numberline{\ref{fig:second}}^
%                      {\ignorespaces Second.}}{\pageref{fig:second}}^
%         \hspace{40pt}\dots
%         \vspace{8pt}^
%       \end{minipage}^
%     \end{minipage}}\\
%   \fbox{^
%     \begin{minipage}{4.0in}^
%       \centering
%       \begin{minipage}{3.5in}^
%         \subfigtopskip=3pt^
%         \subfigcapskip=-2pt^
%         \abovecaptionskip=5pt^
%         \vspace{10pt}^
%         \centering
%         \subfigure[First.]{^
%           \label{fig:first}^
%           \fbox{\hbox to 22mm{\vbox to 15mm{\vfil\null}\hfil}}}^
%         \hspace{14pt}^
%         \subfigure[Second.]{^
%           \label{fig:second}^
%           \fbox{\hbox to 22mm{\vbox to 15mm{\vfil\null}\hfil}}}\\
%         \caption{Two subfigures.}^
%         \label{fig:ex2}^
%         \rr
%         \vspace{15pt}^
%         See figures~\ref{fig:first} and \ref{fig:second}.
%         \vspace{4pt}^
%       \end{minipage}^
%     \end{minipage}}^
%   \vspace{-8pt}
% \end{figure}
% \vspace{-12pt}^finalhack
%
% \subsection{An Example Without Subcaption Text}
% \label{sec:ex3}
% 
% The last example, shown in figure~\ref{fig:ex3}, demonstrates a
% \DescribeMacro{\subref}
% \DescribeMacro{\Subref}
% \enlargethispage{12pt}
% commonly required format where the subfigure are just labeled and the
% description occurs in the main caption.  This is easy to do by using
% the ``empty'' optional caption arguments ``[\space ][\space ]''.  This
% creates a label for the subfigure in the text, but it does not show on
% the List-of-Figures page.  However, by default the caption may not be
% perfectly centered, so |\subfiglabelskip| is reduced to zero points to
% ensure that there is not any extra space hidden in the subcaption.  To
% refer to the subfigure label within the text or the main caption, you
% can use the |\subref| command, which is similar to the |\ref| command,
% but does not carry the figure number.  (The |\Subref| command is the
% same but sets it with |\subcaplabelfont|).
%
% \begin{figure}^
%   \centering
%   \fboxsep=-\fboxrule
%   \subfiglabelskip=0pt
%   \fbox{^
%     \begin{minipage}{4.0in}^
%       \centering
%       \begin{minipage}{3.5in}^
%         \setcounter{lofdepth}{2}^
%         \vspace{.1in}^
%         \section*{ List of Figures}^
%         \vspace{-15pt}^
%         \hspace{40pt}\dots
%         \vspace{3pt}^
%         \contentsline{figure}{\numberline{\ref{fig:ex3}}^
%                      {\ignorespaces A set of four subfigures.}}^
%                      {\pageref{fig:ex3}}^
%         \hspace{40pt}\dots
%         \vspace{8pt}^
%       \end{minipage}^
%     \end{minipage}}\\
%   \fbox{^
%     \begin{minipage}{4.0in}^
%       \centering
%       \begin{minipage}{3.5in}^
%         \subfigtopskip=3pt^
%         \subfigcapskip=-2pt^
%         \subfigbottomskip=3pt^
%         \abovecaptionskip=5pt^
%         \vspace{7pt}^
%         \centering
%         \makeatletter
%         \subfigure[][]{^
%           \label{fig:ex3-a}^
%           \fbox{\hbox to 1.2in{\vbox to 15mm{\null\vfil}\hfil}}}%
%         \hspace{8pt}%
%         \subfigure[][]{^
%           \label{fig:ex3-b}^
%           \fbox{\hbox to 1.2in{\vbox to 15mm{\null\vfil}\hfil}}}\\
%         \subfigure[][]{^
%           \label{fig:ex3-c}^
%           \fbox{\hbox to 1.2in{\vbox to 15mm{\null\vfil}\hfil}}}%
%         \hspace{8pt}%
%         \subfigure[][]{^
%           \label{fig:ex3-d}^
%           \fbox{\hbox to 1.2in{\vbox to 15mm{\null\vfil}\hfil}}}%
%         \caption[A set of four subfigures.]{A set of four subfigures:
%                  \subref{fig:ex3-a} describes the first subfigure;
%                  \subref{fig:ex3-b} describes the second subfigure;
%                  \subref{fig:ex3-c} describes the third subfigure; and,
%                  \subref{fig:ex3-d} describes the last subfigure.}^
%         \label{fig:ex3}^
%         \rr
%         \vspace{15pt}^
%         The text references the main figure as figure~\ref{fig:ex3}
%         or part of it as figures~\ref{fig:ex3-a}--\subref{fig:ex3-c}.
%         \vspace{4pt}^
%       \end{minipage}^
%     \end{minipage}}^
%   \vspace{-12pt}
% \end{figure}
%
% \enlargethispage{12pt}
% \begin{verbatim}
%   \subfiglabelskip=0pt
%   ...
%   \listoffigures
%   ...
%   \begin{figure}%
%     \centering
%     \subfigure[][]{%
%       \label{fig:ex3-a}%
%       ...figure code...}%
%     \hspace{8pt}%
%     \subfigure[][]{%
%       \label{fig:ex3-b}%
%       ...figure code...}\\
%     \subfigure[][]{%
%       \label{fig:ex3-c}%
%       ...figure code...}%
%     \hspace{8pt}%
%     \subfigure[][]{%
%       \label{fig:ex3-d}%
%       ...figure code...}%
%     \caption[A set of four subfigures.]{A set of four subfigures:
%              \subref{fig:ex3-a} describes the first subfigure;
%              \subref{fig:ex3-b} describes the second subfigure;
%              \subref{fig:ex3-c} describes the third subfigure; and,
%              \subref{fig:ex3-d} describes the last subfigure.}%
%     \label{fig:ex3}%
%   \end{figure}
%   ...
%   The text references the main figure as figure~\ref{fig:ex3} or part
%   of it as figures~\ref{fig:ex3-a}--\subref{fig:ex3-c}.
% \end{verbatim}%
% 
% \section{Customization}
% \label{sec:customization}
%
% The following sections describe the internal parameters used by the
% \Lpack{subfigure} package to define the layout of the subfigures
% or tables, as well as the labels and captions the accompany them.
% In addition, adjustments to the entries on a ``List-of'' page and
% the addition of new \Lenv{float} environments are described.
% 
% Adjusting these values allows extensive customization of the
% \Lpack{subfigure} package.  If you want to customize the package, an
% alternative to actually changing the code is to create a a file called
% \Lfile{subfigure.cfg} and place it anywhere that \LaTeX\ will look for
% classes or packages.  Any changes placed in the file will affect the
% predefined parameters and you can override the default settings.  Any
% user options will be processed after this file is loaded.
% 
% In order to change the major commands in the \Lpack{subfigure} package
% with this configure file, you will need to use the |\AtEndOfPackage|
% command to defer that portion of your changes until the end of the
% package.
% 
% \subsection{Changing the Layout}
% \enlargethispage{15pt}^finalhack
% \label{sec:customlayout}
%
% \noindent
% The layout of the |\subfigure| or |\subtable| is defined by several
% internal values which may be changed to customize appearance of the
% object.  The following illustration shows the relationship of these
% values.  Figure~\ref{fig:layout-A} shows the standard layout with the
% caption following the figure.  The figure is vertically centered with
% |\subfigtopskip| of space added above, then |\subfigcapskip| of 
% space is added below the figure followed by the subcaption and, 
% finally, |\subfigbottomskip| of space added at the bottom.  The baseline
% is located at the bottom of the figure.  It is along this baseline that 
% adjacent subfigure boxes are aligned.  Figure~\ref{fig:layout-C} shows 
% the case where the caption precedes the figure ({\it ie.\/}, 
% |\subfiguretopcaptrue| or |\subtabletopcaptrue|).  In this case the
% various boxes and glue are reversed,$\!$\footnote{The \cmd{\subfigtopskip}
% and \cmd{\subfigbottomskip} actually follow the \Lif{figuretopcap}
% and \Lif{tabletopcap} flags, so that the actual top spacing used is
% \cmd{\subfigtopskip} when the flags are {\bf false} and 
% \cmd{\subfigbottomskip} when they are {\bf true}.}
% except that the |\subfigcapskip| is increased by |\subfigcaptopadj|.
% The other two cases, figures~\ref{fig:layout-B} and
% \subref{fig:layout-D}, show the cases where there is no caption.  Note
% that the |\subfigcapskip| is left out when there is no caption.
% Note also, for all of these cases, that the space at the top of the
% subfigure is automatically removed for items that are the first box 
% in a vertical list or other than the first box in a horizontal list.  
% This allows tighter packing of the subfigures and the full use of 
% the page or \Lenv{minipage}.
% 
% Each of these values |\subfigtopskip|, |\subfigcapskip|, and
% |\subfigbottomskip|; as well as |\subfigcapmargin| and
% |\subfiglabelskip| (the latter not shown in figure~\ref{fig:layout})
% may be changed from their defaults (see
% table~{\PrintIfDefined{tab:defaults}{\ref{tab:defaults}}{\ref{tab:spacing}}})
% to adjust the subfigure for the current layout style.  In addition,
% they may all assume negative values, which in some cases may solve
% problems with the layout.  Even though these constants are ``skips'',
% only the last two (|\subfigcapmargin| and |\subfiglabelskip|) will
% shrink or expand since the others assume their natural size in the
% subfigure box and are fixed at that size.
%
% \begin{figure}[p]
%   \subfigtopskip=10pt^
%   \subfigcapskip=4pt^
%   \subfigbottomskip=12pt^
%   \abovecaptionskip=3pt^
%   \centering
%   \fboxsep=-\fboxrule
%   \newbox{\tempbox}
%   \newdimen{\tempdima}
%   \newdimen{\tempdimb}
%   \setbox\tempbox\hbox{
%   $\stackrel{\longleftrightarrow}{\cs{subfigcapmargin}}$}
%   \setbox\tempbox\hbox{\cs{subfigcapmargin}}
%   \tempdimb \wd\tempbox
%   \setbox\tempbox\hbox to \tempdimb{^
%     \kern -.5mm\hbox{$\leftarrow$}\kern -.5mm^
%     \leaders\hrule width1pt height2.6pt depth-2.2pt\hfill
%     \kern -.13mm$\rightarrow$}
%   \tempdima \wd\tempbox
%   \advance\tempdima 1mm
%   \tempdimb \tempdima
%   \multiply\tempdimb -2
%   \advance\tempdimb 4.5in
%   \advance\tempdimb -4mm
%   \subfigure[Standard layout {[FIGBOTCAP] or [TABBOTCAP]}.]{
%     \label{fig:layout-A}
%     \fbox{\parbox{4.5in}{
%       \vspace{1pt}
%       \hbox to 4.5in{
%         \hspace{1.5in}
%         $\left\updownarrow\vrule width0pt height11pt depth1pt\right.$
%         (\cs{subfigtopskip})
%         \hfil}
%       \fbox{\vbox to 45pt{
%         \vskip1pt
%         \vskip\baselineskip
%         \vfil
%         \hbox to 4.5in{
%           \hfil
%           {\scshape subfigure} or {\scshape subtable}
%           \hfil}
%         \vfil
%         \vbox to 0pt{%
%           \vss
%           \hbox to 4.5in{
%             \hspace{9pt}
%             {\small Baseline}
%             \hfil}}
%         \vspace{1pt}}}
%       \hbox to 4.5in{
%         \hspace{1.5in}
%         $\left\updownarrow\vrule width0pt height11pt depth1pt\right.$
%         \cs{subfigcapskip}
%         \hfil}
%       \hbox to 4.5in{
%         \hbox to\tempdima{
%           \vbox to 20pt{
%             \vfil
%             \copy\tempbox
%             \vfil
%             \hbox{\kern .5mm\cs{subfigcapmargin}}
%             \vfil}}
%         \fbox{\vbox to 20pt{
%           \vfil
%           \hbox to\tempdimb{
%             \hfil
%             {\scshape subcaption}
%             \hfil}
%           \vfil}}
%         \hbox to\tempdima{
%           \vbox to 20pt{
%             \vfil
%             \copy\tempbox
%             \vfil
%             \hbox{\kern .5mm\cs{subfigcapmargin}}
%             \vfil}}
%         \hfill}
%       \hbox to 4.5in{
%         \hspace{1.5in}
%         $\left\updownarrow\vrule width0pt height11pt depth1pt\right.$
%         \cs{subfigbottomskip}
%         \hfil}}}}
%
%   \subfigure[Standard layout {[FIGBOTCAP] or [TABBOTCAP]} with no
%              caption present.]{
%     \label{fig:layout-B}
%     \fbox{\parbox{4.5in}{
%       \vspace{1pt}
%       \hbox to 4.5in{
%         \hspace{1.5in}
%         $\left\updownarrow\vrule width0pt height11pt depth1pt\right.$
%         (\cs{subfigtopskip})
%         \hfil}
%       \fbox{\vbox to 45pt{
%         \vskip1pt
%         \vskip\baselineskip
%         \vfil
%         \hbox to 4.5in{
%           \hfil
%           {\scshape subfigure} or {\scshape subtable}
%           \hfil}
%         \vfil
%         \hbox to 4.5in{
%           \hspace{9pt}
%           {\small Baseline}
%           \hfil}
%         \vspace{1pt}}}
%       \hbox to 4.5in{
%         \hspace{1.5in}
%         $\left\updownarrow\vrule width0pt height11pt depth1pt\right.$
%         \cs{subfigbottomskip}
%         \hfil}}}}
%
%   \subfigure[Reversed layout {[FIGTOPCAP] or [TABTOPCAP]}.]{
%     \label{fig:layout-C}
%     \fbox{\parbox{4.5in}{
%       \vspace{1pt}
%       \hbox to 4.5in{
%         \hspace{1.5in}
%         $\left\updownarrow\vrule width0pt height11pt depth1pt\right.$
%         (\cs{subfigbottomskip})
%         \hfil}
%       \hbox to 4.5in{
%         \hbox to\tempdima{
%           \vbox to 20pt{
%             \vfil
%             \copy\tempbox
%             \vfil
%             \hbox{\kern -.5mm\cs{subfigcapmargin}}
%             \vfil}}
%         \fbox{\vbox to 20pt{
%           \vfil
%           \hbox to\tempdimb{
%             \hfil
%             {\scshape subcaption}
%             \hfil}
%           \vfil}}
%         \hbox to\tempdima{
%           \vbox to 20pt{
%             \vfil
%             \box\tempbox
%             \vfil
%             \hbox{\kern -.5mm\cs{subfigcapmargin}}
%             \vfil}}
%         \hfill}
%       \hbox to 4.5in{
%         \hbox to 0pt{
%           \hspace{9pt}
%           \smash{\raisebox{-6.5pt}{\small Baseline}}
%           \hss}
%         \hspace{1.5in}
%         $\left\updownarrow\vrule width0pt height11pt depth1pt\right.$
%         \cs{subfigcapskip}$+$\cs{subfigcaptopadj}
%         \hfil}
%       \fbox{\vbox to 45pt{
%         \vfil
%         \hbox to 4.5in{
%           \hfil
%           {\scshape subfigure} or {\scshape subtable}
%           \hfil}
%         \vfil}}
%       \hbox to 4.5in{
%         \hspace{1.5in}
%         $\left\updownarrow\vrule width0pt height11pt depth1pt\right.$
%         \cs{subfigtopskip}
%         \hfil}}}}
%
%   \subfigure[Reversed layout {[FIGTOPCAP] or [TABTOPCAP]} with no
%             caption present.]{
%     \label{fig:layout-D}
%     \fbox{\parbox{4.5in}{
%       \vspace{1pt}
%       \hbox to 4.5in{
%         \hbox to 0pt{
%           \hspace{9pt}
%           \smash{\raisebox{-6.5pt}{\small Baseline}}
%           \hss}
%         \hspace{1.5in}
%         $\left\updownarrow\vrule width0pt height11pt depth1pt\right.$
%         (\cs{subfigbottomskip})
%         \hfil}
%       \fbox{\vbox to 45pt{
%         \vfil
%         \hbox to 4.5in{
%           \hfil
%           {\scshape subfigure} or {\scshape subtable}
%           \hfil}
%         \vfil}}
%       \hbox to 4.5in{
%         \hspace{1.5in}
%         $\left\updownarrow\vrule width0pt height11pt depth1pt\right.$
%         \cs{subfigtopskip}
%         \hfil}}}}
%   \caption{Subfigure and subtable layout.}
%   \label{fig:layout}
% \end{figure}
%
% \subsection{Adjusting the Subcaption}
% \label{sec:customlabel}
% 
% The subfigure label has three forms.  The first is the one that
% \DescribeMacro{\subref}
% \DescribeMacro{\Subref}
% appears in the text when you use the |\ref| command; the second is the
% one that appears on the List-of-Figures page and may be used to
% reference individual subfigures within the figure and subfigure captions,
% using the |\subref| or |\Subref| commands; and the third is the fully
% formatted version used under the subfigure as the label part of the caption.
% 
% The |\ref| command yields the string, saved by the |\label| command,
% composed by concatenating the value of |\p@subfigure| to
% |\thesubfigure|.  By default these are defined by: ``|\thefigure|''
% and ``|(\alph{subfigure})|'', respectively, which produces a reference
% of the figure number followed by the subfigure letter in parentheses.
% 
% The label used on the List-of-Figures page may be retrieved with the
% |\subref| command (this value is saved by the |\label| command when
% the |\label| command is used within the scope of the subfigure.  This is
% the string defined by |\@@thesubfigure|, which, by default, is the
% value ``|\thesubfigure|'' (or ``|(\alph{subfigure})|'').
%
% The label used with the subcaption text is defined by the internal
% value |\@thesubfigure|, which, by default, has the
% value\hfil\null\linebreak
% \centerline{``\cmd{\thesubfigure}\cmd{\hskip}\cmd{\subfiglabelskip}''.}
% It is prefixed by |\subcapsize\subcaplabelfont| and followed by the
% subcaption text which is set with |\subcapfont|.
%
% \changes{v2.1.4}{30 Apr 2002}{Changed the label and caption defaults
% from \cmd{\rmfamily}\cmd{\mdseries}\cmd{\upshape} to 
% \cmd{\familydefault}\cmd{\seriesdefault} \cmd{\shapedefault}.}
% Note that by default |\subcaplabelfont| has the default value
% ``|{\familydefault| |\seriesdefault\shapedefault}|''.  The package
% options described in table~\ref{tab:options} allow you to set these
% values for your paper.  If you update the |\@subfigure| command, you
% should include any separator character or spacing between the label
% and the start of the subcaption text.  The default is
% |\hskip\subfiglabelskip| placed after the label.
% 
% Finally, the text of the subcaption is prefixed by |\subcapfont| which
% may be changed using the set of nine lower-case font options described
% in table~\ref{tab:options}\@.$\!$\footnote{It is also prefixed by
% \cmd{\subcapsize} as part of the overall label and caption.} \ One other
% way of changing the layout of the lapel and caption is by replacing
% the |\@makesubfigurecaption| or |\@makesubtablecaption| command (which
% by default are identical).
% 
% \subsection{Adjusting the Subfigure and Subtable Counters}
% \label{sec:counters}
%
% To create some special effects, such as continuing the subfigure
% \DescribeMacro{\c@figure}
% \DescribeMacro{\c@table}
% numbering across several pages as part of one long continued figure,
% you can back off the number change from a caption with the command:
% \begin{quote}
%   |\addtocounter{|\Lcount{figure}|}{|-1|}|
% \end{quote}
% within the \Lenv{figure} environment.  In addition, you can adjust for 
% previous subfigures or subtables with one of the following (here
% we assume that two subfigures or subtables appeared in the previous
% pages:
% \begin{quote}
%   |\addtocounter{|\Lcount{subfigure}|}{|2|}|
% \end{quote}
% \vspace{-5pt}
% \noindent
% or
% \vspace{-5pt}
% \begin{quote}
%   |\addtocounter{|\Lcount{subtable}|}{|2|}|.
% \end{quote}
% 
% Two other things that may be necessary, if you switch between figures
% and tables in the same \Lenv{figure} environment ({\it e.g.\/}, by
% changing |\@captype|, see section~\ref{sec:float_env}), is to add the
% command |\listsubcaptions| following the last subfigure when the
% subfigure is using the \Lopt{TOPCAP} or \Lopt{topcap} option.  This is
% necessary to flush the list of subcaptions before the next
% \Lenv{subfigure} or \Lenv{subtable}.  This also may be necessary if
% you switch between |\figuretopcaptrue| and |\figuretopcapfalse|.  The
% other thing that may be required in some cases, is to reset the
% subfigure counter by entering:
% \begin{quote}
%   |\setcounter{|\Lcount{subfigure}|}{|0|}|
% \end{quote}
% \noindent
% This should only be necessary if you are dynamically switching between
% different \Lpack{subfigure} options, or changing the |\@captype|,
% within a float environment.
% 
% \subsection{Modifying the List-of-Figures and List-of-Tables}
% \label{sec:listof}
% 
% To generate a List-of-Figures, or List-of-Tables, page you need to 
% \DescribeMacro{\l@subfigure}
% \DescribeMacro{\@dottedxxxline}
% add a |\listoffigures| or |\listoftables| command where
% you want the list to appear.  These
% commands also cause the appropriate captions and subcaptions to be
% written to a file with the extensions \Lfile{lof} (\Lfile{lot}).  If
% you want the subcaption text to appear in the List-of-Figures or
% List-of-Tables page, you need to change the value of the counter
% \Lcount{lofdepth} (\Lcount{lotdepth}) counter from its default of `1'.
% For example, to have the \Lpack{subfigure} subcaptions to appear on
% the List-of-Figures, add the following to the preamble of your
% paper:
% \begin{quote}
%   |\setcounter{|\Lcount{lofdepth}|}{2}|
% \end{quote}
%
% If you want to change how the subcaption appears on the ``List-of''
% pages you can change its format by redefining the |\l@subfigure|
% or |\l@subtable| command.  Usually you will want to use the
% |\@dottedxxxline| command
% \PrintIfDefined{sec:dl}{(section~\ref{sec:dl},
% page~\pageref{sec:dl})\space}{} to help with the formatting.  For
% instance the default value of |\l@subfigure| is:
%
% \begin{verbatim}
%   \newcommand{\l@subfigure}{%
%     \@dottedxxxline{\ext@subfigure}{2}{3.8em}{2.5em}}
% \end{verbatim}
% \vspace{-10pt}
%
% \noindent
% The arguments of the |\@dottedxxxline| command are:
% \begin{quote}
%   \begin{enumerate}
%     \itemsep -\parsep
%     \item \underline{\smash{\textsf{Type}}}.  The usual values are
%           : \Lfile{lof} or \Lfile{lot}.  The internal
%           values |\ext@subfigure| and |\ext@subtable| stand for
%           these extensions.
%     \item \underline{\textsf{Level}}.  By default this is `2'
%           for the \Lcount{subfigure} and \Lcount{subtable}.  If the level
%           is greater than \Lcount{\meta{Type}depth} (where
%           \underline{\smash{\meta{Type}}} is the first argument, above),
%           then no line is produced.  
%     \item \underline{\textsf{Indent}}.  Total indentation
%           from the left margin. 
%     \item \underline{\textsf{Numwidth}}.  Width of box for the
%           label number if the \underline{\textsf{Title}} has a
%           |\numberline| command.   This is also the amount of extra
%           indentation added to second and later lines of a multiple
%           line entry.    
%     \item \underline{\textsf{Title}}.  Contents of entry ({\it e.g.\/} the
%           \meta{list\_entry} or \meta{subcaption}).
%     \item \underline{\smash{\textsf{Page}}}.  The page number of the
%           figure or table.
%   \end{enumerate}
% \end{quote}
%
% \noindent
% The final two arguments, \underline{\textsf{title}} and
% \underline{\smash{\textsf{page}}}, are automatically appended to the
% value of |\l@subfigure| (and symmetrically for |\l@subtable|).
%
% For example, to change the amount of space reserved for the label 
% (if, for instance, you have a lot of figures and the and you need extra
%  space for the figure number) you could widen the 
% \texttt{2.5em} space for the label to \texttt{4.0em}:
% \begin{verbatim}
%   \makeatletter
%     \renewcommand{\l@subfigure}{%
%       \@dottedxxxline{\ext@subfigure}{2}{3.8em}{4.0em}}
%   \makeatother
% \end{verbatim}
%
% \subsection{Aligning Captions Above the Figure}
% \label{sec:custom-position}
%
% \begin{figure}^
%   \figuretopcaptrue
%   \subfigtopskip=-5pt^
%   \subfigcapskip=-3pt^
%   \subfigbottomskip=2pt^
%   \centering
%   \caption{Caption position option: [\Lopt{figtopcap}] with changing
%            settings of \cmd{\subfiguretopcap}.}^
%   \label{fig:position3}^
%   \subfiguretopcapfalse
%   \subfigure[First caption.]{\hbox to 1.5in{\hfil\null}}^
%   \hspace{0.2in}^
%   \subfigure[Second long, long, long, long, 
%              long, long, long, long caption.]{^
%     \hbox to 1.5in{\hfil\null}}\\[5pt]
%   \subfiguretopcaptrue
%   \subfigure{\fbox{\hbox to 1.5in{\vbox to 15mm{\vfil\null}\hfil}}}^
%   \hspace{0.2in}^
%   \subfigure{\fbox{\hbox to 1.5in{\vbox to 10mm{\vfil\null}\hfil}}}^
%   \setcounter{subfigure}{0}
% \end{figure}
%
% \noindent
% For unbalanced sets of captions placed, above the figures or tables,
% \DescribeMacro{\subfiguretopcaptrue}
% \DescribeMacro{\subfiguretopcapfalse}
% \DescribeMacro{\figuretopcaptrue}
% the caption portion looks unbalanced, such as the ones in 
% figure~\ref{fig:position2}.  If you prefer to have the caption portion
% aligned along the top rather than the bottom, as shown in 
% figure~\ref{fig:position3}, you can use the
% \Lopt{figtopcap} option as in figure~\ref{fig:position2}, but use
% two ``empty'' subfigures to position the captions followed by 
% two more containing the figures, but without captions.  The code
% to produce this example is: 
%
% \begin{verbatim}
%   \begin{figure}%
%   \centering
%     \caption{Caption position option: [\Lopt{figtopcap}] with changing
%              settings of \subfiguretopcap.}%
%     \label{fig:position3}%
%     \subfiguretopcapfalse
%     \subfigure[First caption.]{\hbox to 1.5in{\hfil\null}}%
%     \hspace{0.2in}%
%     \subfigure[Second long, long, long, long, 
%                long, long, long, long caption.]{%
%       \hbox to 1.5in{\hfil\null}}\\[5pt]
%     \subfiguretopcaptrue
%     \subfigure{\fbox{\hbox to 1.5in{\vbox to 15mm{\vfil\null}\hfil}}}%
%     \hspace{0.2in}%
%     \subfigure{\fbox{\hbox to 1.5in{\vbox to 10mm{\vfil\null}\hfil}}}%
%   \end{figure}
% \end{verbatim}
% 
% This example makes use of one of the four flags that control how the
% caption labels are numbered and where the subcaption appears.  Two are
% for |\subfigure| and two for |\subtable|.  The first of each set tell
% the |\subfigure| or |\subtable| command that the related main caption
% appears before or after the set of subfloats.  |\figuretopcaptrue| and
% |\tabletopcaptrue| indicate that the caption appears before and
% |\figureotopcapfalse| and |\tabletopcapfalse| indicate that the it
% appears after.  The other two flags force the subcaption to be placed
% before (|\subfiguretopcaptrue| and |\subtabletopcaptrue|) or after the
% actual subfigure or subtable (|\subfiguretopcapfalse| and
% |\subtabletopcapfalse|).
% 
% There are two difficulties with this approach, first, you need to keep
% changing the setting of |\subfiguretopcap|, and second, if you have
% more than one row of subfigures or subtables, then you will need to
% fiddle with the counter (see section~\ref{sec:counters} to keep the
% numbers straight.  The reason that this format is not supported by the
% \Lpack{subfigure} package is that you need information about all of
% the subfigure or subtables on a row to box the figures correctly and
% this information is not available locally.
% 
% \subsection{Adding Subfloats to New Environments}
% \enlargethispage{15pt}^finalhack
% \label{sec:customfloat}
% 
% It is easy to add a \Lenv{subfloat} command to a new environment.  For
% instance, let us assume we have a new \Lenv{float}
% environment\footnote{For information on creating new float
% environments, see any of the following: \cite{Lamp01}, \cite{Wils01}
% or \cite{Ling01}.} called ``\Lenv{map}'' in which various maps are
% displayed and for which a List-of-Maps is to be generated in the
% contents section.  If we wanted to have \Lenv{submaps}, then we could
% define the following:
% 
% \vspace{-4pt}
% \begin{verbatim}
%   \makeatletter
%     \newcounter{submap}[map]
%     \newif\ifmaptopcap
%     \newif\ifsubmaptopcap
%     \newcommand{\p@submap}{\themap}
%     \newcommand{\thesubmap}{(\alph{submap})}
%     \newcommand{\@thesubmap}{\themap\hskip\subfiglabelskip}
%     \newcommand{\@@thesubmap}{\themap}
%     \newcommand{\ext@submap}{\ext@map}
%     \newcommand{\l@submap}{\@dottedxxxline{\ext@submap}{2}{3.8em}{2.5em}}
%     \newcounter{lomdepth}
%     \setcounter{lomdepth}{1}          
%     \newcommand{\submap}{\subfigure}
%     \newcommand{\@makesubmapcaption}{\@makesubfigurecaption}
%     \ifhyperrefloaded
%       \newcommand\theHsubmap{\themap.\arabic{submap}}
%       \newcommand{\toclevel@submap}{1}
%     \fi
%   \makeatother
% \end{verbatim}
% \vspace{-14pt}
% 
% The first and last lines make the character `@' act like a letter
% between them and therefore it may be part of a command name used there.
% First a new counter for the \Lpack{submap} is created along with two
% conditionals that define where the position ({\i.e.\/}, above or
% below) of the main caption and subcaption is with respect to the
% submap. Then the four commands that define the \Lpack{submap} label
% are created.  The first two, |\p@submap| and |\thesubmap| define the
% standard label returned by |\ref|.  The next, |\@thesubmap| gives the 
% label as shown under or over the submap with the subcaption and the 
% last, |\@@thesubmap| shows how the label is displayed on the List-of-Maps
% and/or referenced with the |\subref| command.
% 
% The next four lines show where and how to print to the List-of-Maps
% page: |\ext@submap| gives the List-of-Maps file extension; |\l@submap|
% shows how to print the submap line on the List-of-Maps page; and the last
% two lines show how to create and set the counter \Lcount{lomdepth}, which
% controls how many caption levels are shown on the page when it is printed.
% 
% The next two lines create the |\submap| and |\@makesubmapcaption|
% commands by making them the same as the |\subfigure| and
% |\@makesubfigurecaption| commands.
% 
% The last four lines conditionally create the |\theHsubmap| and
% |\toclevel@submap| commands which are used by the \Lpack{hyperref}
% Package to name the item and to control the presence of the item
% bookmark.
%
% Of course, this is where the \Lpack{ccaption} package \cite{Wils01}
% comes in handy since it will do all of the above with one command:
%
% \vspace{-4pt}
% \begin{verbatim}
%   \newsubfloat{map}
% \end{verbatim}
% \vspace{-10pt}
%
% 
% \subsection{Interaction with Other Parts of \LaTeX}
% In the following sections, the interaction of the \Lpack{subfigure}
% package with other parts of \LaTeX\ is documented.  These ``other
% parts'' may be either part of the the \LaTeX\ base or contributed
% packages or classes. 
% 
% \subsubsection{\TeX 's ``Mouth''}
% The most important thing to remember when laying out your figures
% within a \Lenv{float} environment is that spaces take room.  If you 
% have an extra space between two figures, then they will be separated 
% by a little bit.
%
% \TeX 's state varies as it reads a line of text from a file.  It
% ignores some spaces and carriage-returns and converts others to
% |\space|'s or |\par|'s.  You can use a `|%|' to insure that you only
% have real spaces where you want them.  To understand which spaces
% are significant, you should read chapters~7 and 8 of the \TeX book
% \cite{Knut86}.  However, the main source of unexpected
% extra spacing is carriage-returns which are turned in to |\space|'s.
% As a general rule: if in doubt, then add a `|%|' immediately after
% the last significant character of the line.
%
% \subsubsection{The Float Environment}
% \label{sec:float_env}
% 
% Although the \Lpack{subfigure} package was designed to work within a
% \Lenv{float} environment ({\it e.g.\/}, \Lenv{figure} or
% \Lenv{table}), it can be used outside with the following two caveats:
% \begin{enumerate}\itemsep=5pt
%   \item You need to define |\@captype|.  This is usually either
%     \Lenv{figure} or \Lenv{table}.  For example add the following
%     to the preamble of your document:
%     \begin{verbatim}
%       \makeatletter
%         \newcommand{\change_cap_type}[1]{%
%           \renewcommand{\@captype}{#1}}
%       \makeatother
%     \end{verbatim}\vspace{-15pt}
%     Then use the new command to switch in the middle of a given
%     \Lenv{float} environment, say from ``figure'' to ``table'' with 
%     the command |\change_cap_type{table}|.
%   \item If you want to define references using |\label|, then you also
%     need to redefine the \LaTeX\ internal |\@currentlabel|.  For
%     example: 
%     \begin{verbatim}
%       \makeatletter
%         \edef\@currentlabel{\p@subfigure\thesubfigure}
%       \makeatother
%     \end{verbatim}\vspace{-15pt}
%     before using the |\label| command.  NOTE: Many other commands change 
%     |\@currentlabel|, including all of the ``section'' commands,
%     |\caption|, \Lenv{equation}'s, and \Lenv{theorem}'s.
% \end{enumerate}
% 
% \subsubsection{Interaction with Other Packages}
%
% \changes{v2.1}{22 Jan 2001}{Added \Lpack{ccaption} reference.}
%
% \changes{v2.1}{11 Oct 1996}{Revised subsubsection on use with
% the caption package and extended this section to talk about the
% \Lpack{captcont} package.} 
%
% \noindent
% The only packages that directly interact with the \Lpack{subfigure}
% package are the \Lpack{caption}/\Lpack{caption2} packages by
% H.A. Sommerfeldt \cite{Somm95a,Somm95b}, the \Lpack{ccaption} package
% and \Lpack{tocloft} packages by Peter Wilson \cite{Wils01,Wils01B},
% and the \Lpack{captcont} package by S.D. Cochran \cite{Coch02}.
% 
% \paragraph{\Lpack{caption}}
% 
% If you load the \Lpack{subfigure} package {\bf before} the
% \Lpack{caption} package, then the \Lpack{caption} package will detect
% that fact and will change the |\subcapsize| when the options
% \Lopt{scriptsize}, \ldots, \Lopt{Large} are specified (overriding such
% options used when loading the \Lpack{subfigure} package).  In
% addition, it redefines |\@thesubfigure| and |\@thesubtable| to use
% |\captionlabelfont|.  It also uses an older layout of
% |\@thesubsubfigure| and |\@thesubtable|.
% 
% The best plan is to load the \Lpack{caption} package {\bf before} the
% \Lpack{subfigure} package.  In addition, you should try to coordinate
% the ``look and feel'' of the two packages.  This limits you a little
% since, although the two packages have similar options, the options in
% the \Lpack{caption} package do not combine the same way.  You can pick
% one from each column:\par\null
% 
% \DeleteShortVerb{\|}
% \noindent\hfil\begin{tabular}{*{4}{p{17mm}|}p{17mm}}
%   \rr \Lopt{normal}, \Lopt{hang}, \Lopt{center}, \Lopt{centerlast} &
%   \rr \Lopt{nooneline}                                             &
%   \rr \Lopt{scriptsize}, \Lopt{footnotesize}, \Lopt{small}, 
%       \Lopt{normalsize}, \Lopt{large}, \Lopt{Large}                &
%   \rr \Lopt{up}, \Lopt{it}, \Lopt{sl}, \Lopt{sc}, \Lopt{md}, 
%       \Lopt{bf}, \Lopt{rm}, \Lopt{sf}, \Lopt{tt}                   &
%   \rr (Other options---see package.)
% \end{tabular}
% \MakeShortVerb{\|}
% \vskip14pt
% 
% \paragraph{\Lpack{caption2}}
% 
% This package acts similarly to the \Lpack{caption} package.  If you
% specify the \Lopt{subfigure} it will try to support the subfigure
% package, if you specify \Lopt{nosubfigure} than it will not.  If
% neither option is specified, than load order matters.  If loaded
% {\bf before} the \Lpack{subfigure} package, than it will not try to
% support the package and if loaded {\bf after} it will.
% 
% Again, the best plan is to load the \Lpack{caption2} package 
% {\bf before} the \Lpack{subfigure} package, and specify the
% \Lopt{nosubfigure} option.  In addition, you should try to coordinate
% the ``look and feel'' of the two packages.  This limits you a little
% since, although the two packages have similar options, they are not
% exactly the same; however, most of the good looking combinations are
% easily available.  You can pick one from each column:\par\null
% 
% \DeleteShortVerb{\|}
% \noindent\hfil\begin{tabular}{*{5}{p{17mm}|}p{17mm}}
%   \rr \Lopt{nosubfigure}, \Lopt{subfigure}          &
%   \rr \Lopt{normal}, \Lopt{hang}, \Lopt{center}, \Lopt{centerlast}
%       \Lopt{flushleft}, \Lopt{indent}               &
%   \rr \Lopt{oneline}, \Lopt{nooneline}              &
%   \rr \Lopt{scriptsize}, \Lopt{footnotesize}, \Lopt{small}, 
%       \Lopt{normalsize}, \Lopt{large}, \Lopt{Large} &
%   \rr \Lopt{up}, \Lopt{it}, \Lopt{sl}, \Lopt{sc}, \Lopt{md}, 
%       \Lopt{bf}, \Lopt{rm}, \Lopt{sf}, \Lopt{tt}^,
%^      \Lopt{UP}, \Lopt{IT}, \Lopt{SL}, \Lopt{SC}, \Lopt{MD}, 
%^      \Lopt{BF}, \Lopt{RM}, \Lopt{SF}, \Lopt{TT}
%                                                     &
%   \rr (Other options---see package.)
% \end{tabular}
% \MakeShortVerb{\|}
%
% \paragraph{\Lpack{ccaption}}
% 
% The \Lpack{ccaption} package provides for all sorts of extensions and 
% style options for \Lenv{float} |\captions|.  It also provides for the
% use of the |\caption| command outside of a \Lenv{float} environment and
% a mechanism for creating new types of \Lenv{float} environments.
%
% In order to use it with the \Lpack{subfigure} package, you need to 
% pass the \Lopt{subfigure} option when loading it:
% 
% \begin{quote}
%   |\usepackage|[subfigure]\{ccaption\}
% \end{quote}
%
% \paragraph{\Lpack{tocloft}}
% 
% The \Lpack{tocloft} package gives the user the ability to easily
% configure the ``List-of'' pages.  It takes a \Lopt{subfigure} option
% so it doesn't matter which package is loaded first.
%
% \begin{quote}
%   |\usepackage|[subfigure]\{tocloft\}
% \end{quote}
%
% \paragraph{\Lpack{hyperref}}
% \label{sec:hyperref}
%
% \changes{v2.1.2}{26 Mar 2002}{Improved coordination with the hyperref
% package.}
%
% \changes{v2.1.1}{15 Mar 2002}{Added coordination with the hyperref
% package. There is some interaction with the \cmd{label} command as
% pointed out by Martin.Bernreuther@po.uni-stuttgart.de.}
% 
% The \Lpack{hyperref} package extends the functionality of all of the
% \LaTeX\ cross-referencing commands to produce hypertext links.  In
% addition, it provides new commands to allow the user to insert
% hypertext links.  When used with the \Lpack{subfigure} package, they
% may be loaded in any order; however, it might be better if the 
% \Lpack{subfigure} package is loaded {\bf first}.
% 
% To more fully support the \Lpack{hyperref} package, the |\label|
% \DescribeMacro{\subfloat@label}
% command, when used within the scope of the |\subfigure| or |\subtable|
% commands takes an optional argument (note the parentheses rather than
% square brackets):
% \vspace{-2pt}
% \begin{quote}
%   |\label|\parg{bookmark}\marg{key}
% \end{quote}
% \vspace{-2pt}
%
% \noindent
% We would like to use the subcaption as the bookmark text, but the
% |\label| command is often processed before the subcaption.  Therefore,
% this optional argument may be used to supply this information if
% desired.  By default a bookmark field of the form
% ``Subfigure\textvisiblespace 1(a)'' will be generated.
% \footnote{If the document class is \Lpack{report} or other class that
% defines \cmd{\thechapter}, than the default bookmark field will be of the
% form ``Subfigure\textvisiblespace 1 \textvisiblespace 1(a)''.}
% 
% 
% \paragraph{\Lpack{captcont}}
% 
% This package may be used with or without the \Lpack{subfigure} package
% \DescribeMacro{\caption}
% \DescribeMacro{\caption*}
% \DescribeMacro{\captcont}
% \DescribeMacro{\captcont*}
% to extend figure or table numbering across multiple pages.  This
% package knows about how the \Lpack{subfigure} package interacts with
% the List-of-Figures and List-of-Tables and does the right thing when
% used with \Lenv{subfigure}'s and \Lenv{subtable}'s.
% 
% The \Lpack{captcont} package may be loaded either {\bf before} or 
% {\bf after} the \Lpack{subfigure} and it has four options:
% \Lopt{figbotcap} or \Lopt{figtopcap} and \Lopt{tabbotcap} or
% \Lopt{tabtopcap}.  These are the same as the \Lpack{subfigure}
% options.  When the \Lpack{captcont} package is used with the
% \Lpack{subfigure} package, only the \Lpack{subfigure} options matter.
% Any given with the \Lpack{captcont} package are ignored.
% 
% The thing to remember about the \Lpack{captcont} package is that if
% you normally place the |\caption| {\bf before} your subfigures or
% subtables ({\it i.e.\/}, \Lopt{figtopcap} or \Lopt{tabtopcap}
% respectively), then you start a series of continued \Lenv{figure}'s
% with the |\caption[*]| and use |\contcapt[*]| in each of the rest of
% the figures.  If you {\bf follow} your subfigures or subtables with a
% caption ({\it i.e.\/}, \Lopt{figbotcap} or \Lopt{tabbotcap}
% respectively), then you start the series with the |\contcapt[*]| in
% the first \Lenv{figure} environment and all but the last where you use
% the |\caption[*]|.
% 
% \subsubsection{Creating a \Lenv{subfigure} Environment}
%
% \changes{v2.1.4}{24 Apr 2002}{Added \cmd{\label} command handling
% example in the \Lenv{subfloat} environment, thanks to Lars Clausen.}
%
% Some people have wanted to use the \Lenv{verbatim} environment within
% \DescribeEnv{subfloat}
% the \cmd{\subfigure} command and run into the restriction that the
% \Lenv{verbatim} environment cannot be nested.  To include verbatim text in
% a subfigure, you can define a new environment, in which verbatim
% text may be enclosed, and which calls the \cmd{\subfigure} command.
% \vspace{-2pt}
% \begin{verbatim}
%   \newbox\subfigbox             % Create a box to hold the subfigure.
%   \makeatletter
%     \newenvironment{subfloat}%  % Create the new environment. 
%       {\def\caption##1{\gdef\subcapsave{\relax##1}}%
%        \let\subcapsave=\@empty  % Save the subcaption text.
%        \let\sf@oldlabel=\label
%        \def\label##1{\xdef\sublabsave{\noexpand\label{##1}}}%
%        \let\sublabsave\relax    % Save the label key.
%        \setbox\subfigbox\hbox
%          \bgroup}%              % Open the box...
%         {\egroup                % ... close the box and call \subfigure.
%        \let\label=\sf@oldlabel
%        \subfigure[\subcapsave]{\box\subfigbox}}%
%   \makeatother
% \end{verbatim}
% \enlargethispage{12pt}^finalhack
% \noindent
% The following is an example of this \Lenv{subfloat} environment begin
% used to produce figure~\ref{fig:verbatim}.  Note that you need to
% supply the width of the \Lenv{verbatim}; here we use a section using a
% \Lenv{minipage}).
% \begingroup
%   \newbox\subfigbox
%   \makeatletter
%     \newenvironment{subfloat}^
%       {\def\caption##1{\gdef\subcapsave{\relax##1}}^
%        \let\subcapsave=\@empty
%        \let\sf@oldlabel=\label
%        \def\label##1{\xdef\sublabsave{\noexpand\label{##1}}}^
%        \let\sublabsave\relax
%        \setbox\subfigbox\hbox
%          \bgroup}^
%         {\egroup
%          \let\label=\sf@oldlabel
%          \subfigure[\subcapsave]{\box\subfigbox\sublabsave}}^
%   \makeatother
%   \begin{figure}
%     \centering
%     \subfigtopskip=0pt^
%     \subfigcapskip=0pt^
%     \subfigbottomskip=0pt^
%     \begin{subfloat}^
%       \begin{minipage}{2.1in}
%         \begin{verbatim}
%      This text  should be
%   verbatim.     And   not
%    messed with in any way  !
%         \end{verbatim}
%       \end{minipage}^
%       \caption{First subcaption.}^
%       \label{fig:verbone}
%     \end{subfloat}^
%     \hspace{10pt}^
%     \begin{subfloat}^
%       \begin{minipage}{2.1in}
%         \begin{verbatim}
%     This text (also)should be
%   verbatim.     And   not
%    messed with in any way  !
%         \end{verbatim}
%       \end{minipage}^
%       \caption{Second subcaption.}^
%       \label{fig:verbtwo}
%     \end{subfloat}
%     \caption{Subfigures~\subref{fig:verbone} and \subref{fig:verbtwo} 
%              show examples of using verbatim text in a subfigure.}
%     \label{fig:verbatim}
%   \end{figure}
% \endgroup
% \begin{quote}\
%   |\begin{figure}| \\
%   |  \centering|
%   |  \begin{subfloat}%| \\
%   |    \begin{minipage}{2.1in}| \\
%   |      \begin{verbatim}| \\
%   |   This text  should be| \\
%   |verbatim.     And   not| \\
%   | messed with in any way  !| \\
%   |      \end{verbatim}| \\
%   |    \end{minipage}%| \\
%   |    \caption{First subcaption.}%| \\
%   |    \label{fig:verbone}| \\
%   |  \end{subfloat}%| \\
%   |  \qquad| \\
%   |  \begin{subfloat}%| \\
%   |    \begin{minipage}{2.1in}| \\
%   |      \begin{verbatim}| \\
%   |  This text (also)should be| \\
%   |verbatim.     And   not| \\
%   | messed with in any way  !| \\
%   |      \end{verbatim}| \\
%   |    \end{minipage}%| \\
%   |    \caption{Second subcaption.}%| \\
%   |    \label{fig:verbtwo}| \\
%   |  \end{subfloat}| \\
%   |  \caption{Subfigures~\subref{fig:verbone} and \subref{fig:verbtwo}| \\
%   |           show examples of using verbatim text in a subfigure.}| \\
%   |  \label{fig:verbatim}| \\
%   |\end{figure}|
% \end{quote}
%
%
% \StopEventually{^
% \section{Acknowledgements}
%
% This package was originally written to automatically line up some
% figure boxes and place labels under them for a paper that I was
% writing.  I thought it useful and uploaded it to the internet
% community and later to CTAN.  Many people have asked questions or
% given comments which collectively have changed and improved the
% usefulness of this package.
% 
% A few people have contributed more than most and I want to thank
% them publicly, but in no particular order:
% 
% \begin{itemize}\itemsep=-2pt^finalhack
%   \item{\bf Harald Axel Sommerfeldt} for the work that he did to adjust
%     his \Lpack{caption} and \Lpack{caption2} packages as necessary to
%     support the \Lpack{subfigure} package when they are loaded together.
%   \item {\bf Peter Wilson} for the work that he did to adjust his
%     \Lpack{ccaption} package (and other packages) as necessary to support
%     the \Lpack{subfigure} package when they are loaded together.
%   \item {\bf William `bil' L. Kleb} for his extensive list of errors and
%     suggestions to this documentation.
%   \item{\bf Axel Reichert} for his request for a `hang' caption style 
%     since the subcaptions tend to have a short width.  And, for his 
%     request for some way of referencing the individual subfigures in 
%     the main caption without the figure number.
%   \item{\bf Harald Harders} for his suggestion of the \cmd{\subref}
%     command and modifying \cmd{\label} within the \Lpack{subfigure} 
%     package to save local references to the subfigures that are often
%     needed.
%   \item{\bf Heiko Oberdiek} and {\bf James A. Bednar} for their help 
%     with coexisting with the \Lpack{hyperref} and \Lpack{html} packages.
%     Also, {\bf Ingele Roelens} for pointing out some further compatibility
%     problems when using the \Lpack{hyperref} package with PDF\LaTeX.
%   \item{\bf Frederic Darboux} for searching out and finding several
%     incompatibilities with other packages.
%   \item{\bf David Kastrup} for the code to check for class or packages
%     using \cmd{\let} on \cmd{\end@float} and the like.
% \end{itemize}
%
% \newpage^finalhack
%
% \begin{thebibliography}{6}^\itemsep=-2pt^finalhack
% \itemsep=0.8pt
% \bibitem{Somm95a}^
%   Harald Axel Sommerfeldt,
%   \emph{The \Lpack{caption} Package},
%   Version 1.4b, 1995/04/05.
%   (Available from CTAN as file \texttt{caption.dtx}.)
% \bibitem{Somm95b}^
%   Harald Axel Sommerfeldt,
%   \emph{The \Lpack{caption} Package},
%   Version 2.0(beta), 1995/10/09.
%   (Available from CTAN as file \texttt{caption2.dtx}.)
% \bibitem{Wils01}^
%   Peter Wilson,
%   \emph{The \Lpack{ccaption} Package},
%   Version 1.0a, 2001/08/15.
%   (Available from CTAN as file \texttt{ccaption.dtx}.)
% \bibitem{Wils01B}^
%   Peter Wilson,
%   \emph{The \Lpack{tocloft} Package},
%   Version 2.2, 2001/14/17.
%   (Available from CTAN as file \texttt{ccaption.dtx}.)
% \bibitem{Raht02}^
%   Sebastian Rahtz,
%   \emph{Hypertext marks in \LaTeX},
%   2002/04/05/.
%   (Available from CTAN as file \texttt{hyperref.dtx}.)
% \bibitem{Coch02}^
%   Steven Douglas Cochran,
%   \emph{The \Lpack{captcont} Package},
%   2002/02/14/.
%   (Available from CTAN as file \texttt{captcont.dtx}.)
% \bibitem{Reck97}^
%   Keith Reckdahl,
%   \emph{Using Imported Graphics in \LaTeXe},
%   1997/12/15.
%   (Available from CTAN as file \texttt{epslatex.pdf})
% \bibitem{Lamp94}^
%   Leslie Lamport,
%   \emph{LaTeX User's Guide and Reference Manual}, 2nd edition,
%   Addison-Wesley, Reading, Massachusetts,
%   1994.
% \bibitem{Knut86}^
%   Donald Ervin Knuth,
%   \emph{The \TeX book},
%   Addison-Wesley, Reading, Massachusetts,
%   1986.
% \bibitem{Lamp01}^
%   Leslie Lamport, Frank Mittelbach, and Johannes Braams,
%   \emph{Standard Document Classes for \LaTeX\ version 2e}
%   Version 1.4e, 2001/04/01.
%   (Available from CTAN as file \texttt{classes.dtx}.)
% \bibitem{Ling01}^
%   Anselm Lingnau,
%   \emph{An Improved Environment for Floats.}
%   Version 1.3d, 2001/11/08.
%   (Available from CTAN as file \texttt{float.dtx}.)
% \end{thebibliography}}
%
% \newpage^finalhack
%
% \section{The Code}
% \iffalse
%<*package>
% \fi
% \subsection{Identification}
%
% \changes{v2.1}{23 Jan 2002}{Updated the release date.}
%
% \changes{v2.1}{11 Oct 1996}{Removed compatibility with \LaTeX2.09.}
%
% Announce the \Lpack{subfigure} package.
%
%    \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}[1994/12/01]
\ProvidesPackage{subfigure}[2002/03/15 v2.1.5 subfigure package]
%    \end{macrocode}
%
% \subsection{Check for Nasty Classes}
% \changes{v2.1.5}{29 Apr 2005}{At the request of David Kastrup, added
% code to check for classes that use \cmd{\let} on \cmd{\end@figure}
% and similar; and to print a warning and fix the problem if detected.}
%
% \begin{macro}{\sf@floatfix}
%
% Some ``broken'' document classes use \cmd{\let} on \cmd{\end@figure}
% and similar, which are used as hooks in the end-processing of, in 
% this case, figures.  The following code, courtesy of David Kastrup
% (dak\@gnu.org) fixes the problem and prints a warning.
%    \begin{macrocode}
\def\sf@floatfix#1#2{%
  \ifx#1#2%
    \ifx#1\@undefined\else
      \PackageWarningNoLine{subfigure}{%
Your document class has a bad definition^^J
of \string#1, most likely^^J
\string\let\string#1=\string#2^^J
which has now been changed to^^J
\string\def\string#1{\string#2}^^J
because otherwise subsequent changes to \string#2^^J
(like done by several packages changing float behaviour)^^J
can't take effect on \string#1.^^J
Please complain to your document class author}%
      \def#1{#2}%
    \fi
  \fi}
%    \end{macrocode}
%
%    \begin{macrocode}
\begingroup
\def\next#1#2{%
    \endgroup
  \sf@floatfix\endfigure\end@float
  \sf@floatfix\endtable\end@float
  \sf@floatfix#1\end@dblfloat
  \sf@floatfix#2\end@dblfloat}
\expandafter\next\csname endfigure*\expandafter\endcsname
  \csname endtable*\endcsname
%    \end{macrocode}
%
% \end{macro}
%
% \subsection{Check for the \Lpack{hyperref} Package}
%
% \changes{v2.1.4}{02 Jul 2002}{Added the \cmd{\theHsubfigure} and 
% \cmd{\theHsubtable} commands to avoid duplicate names in a PDF
% file when using the \Lpack{hyperref} Package.}
%
% \changes{v2.1.3}{17 Apr 2002}{Changed \cmd{\newcommand} to 
% \cmd{\providecommand} to allow other packages to set the
% \cmd{\toclevel@subfigure} and \cmd{\toclevel@subtable}.}
%
% \changes{v2.1.2}{26 Mar 2002}{Changed to simplify the interaction
% with the hyperref package and avoid loading nameref.}
%
% \changes{v2.1.1}{15 Mar 2002}{Added coordination with the hyperref
% package.}
% 
% \begin{macro}{\toclevel@subfigure}
% \begin{macro}{\toclevel@subtable}
%
% After every package is loaded, check to see if the \Lpack{hyperref}
% package was among them, if so, then make sure that the |\ifhyperrefloaded|
% switch is set so that the |\subfloat@label| command will write the correct
% form of the |\newlabel| to the \Lfile{aux} file.  Also define the 
% ``TOC level'' of the subfigure and subtable.  We fix these at one since
% the default figure and table levels are zero.  Finally, we add definitions
% for |\theHsubfigure| and |\theHsubtable| to avoid duplicate names in
% the PDF file when using the \Lpack{hyperref} Package.
% 
%    \begin{macrocode}
\newif\ifhyperrefloaded
\AtBeginDocument{%
  \@ifpackageloaded{hyperref}{%
    \hyperrefloadedtrue
    \providecommand\theHsubfigure{\thefigure.\arabic{subfigure}}%
    \providecommand\theHsubtable{\thetable.\arabic{subtable}}%
    \providecommand{\toclevel@subfigure}{1}%
    \providecommand{\toclevel@subtable}{1}}{}}
%    \end{macrocode}
%
% \end{macro}
% \end{macro}
%
% \subsection{Initialization and Shared Constants}
% \begin{macro}{\ifsubcaphang}
% \begin{macro}{\ifsubcapcenter}
% \begin{macro}{\ifsubcapcenterlast}
% \begin{macro}{\ifsubcapnooneline}
% \begin{macro}{\ifsubcapraggedright}
%
% \changes{v2.1}{23 Jan 2002}{Added.}
% 
% These five flags control how the style in which the subfloat label and
% caption are printed.  The \Lif{subcaphang} flag is first checked and
% if true, causes the subcaption label to be typeset separately and
% placed to the upper left of the space available for the subcaption.
% The \Lif{subcapcenter} flag centers each line of the subcaption.  The
% \Lif{subcapcenterlast} centers the last line of the subcaption (this
% is a {\sc nop} if the \Lif{subcapcenter} flag is true.  If the
% \Lif{subcapnooneline} is false, then the label plus the text of the
% subcaption are centered.  If it is true, than the other flags may
% cause something different to happen.  The purpose of this flag,
% generally, is to cause a single line to be left justified when there
% is a very short caption.  The last flag is the \Lif{subcapraggedright}
% which typsets its text without lining up the right side.  This is
% useful for the subcaptions since they are usually short and prone to
% generating hyphenated words unless allowed to be ragged.
%
%    \begin{macrocode}
\newif\ifsubcaphang
\newif\ifsubcapcenter
\newif\ifsubcapcenterlast
\newif\ifsubcapnooneline
\newif\ifsubcapraggedright
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \noindent
% Table~\ref{tab:defaults} gives the initial (default) values of the
% internals that are used to control the placement and printing of the
% subfloats.
%
% \changes{v2.1.4}{30 Apr 2002}{Changed the label and caption defaults
% from \cmd{\rmfamily}\cmd{\mdseries}\cmd{\upshape} to 
% \cmd{\familydefault}\cmd{\seriesdefault} \cmd{\shapedefault}.}
% \DeleteShortVerb{\|}
% \MakeShortVerb{\/}
% \begin{table}^
%   \def\pz{\phantom{0}}^
%   \def\M#1{\vspace*{#1}}
%   \caption[Default values of the Subfigure constants.]%
%           {Default values of the Subfigure constants.  These
%           values are set during the options processing (see 
%           section~\ref{sec:startup}).}^
%   \label{tab:defaults}^
%   \vspace{5pt}^
%   \begin{minipage}{4.8in}^
%     \setlength\tabcolsep{5pt}^
%     \rr
%     \begin{tabular}{|l|c|p{1.3in}|p{1.963in}|}\hline
%       \multicolumn{1}{|c|}{\raisebox{-1.5ex}{\bf Command}}
%                 & \multicolumn{1}{c|}{\bf \Lopt{loose}}
%                           & \multicolumn{1}{c|}{\bf \Lopt{tight}}
%                                     &
%                   \multicolumn{1}{c|}{\raisebox{-1.5ex}{\bf Description}}
%                                               \\
%                 & \multicolumn{1}{c|}{\bf Option}
%                           & \multicolumn{1}{c|}{\bf Option}
%                                     &         \\ \hline
%       \raisebox{-2.1ex}{\cmd{\subfigtopskip}}
%                 & \raisebox{-2.1ex}{10 pt}
%                           & \M{0.6ex}\hfil 5 pt
%                                     & \rr Length from the top of the subfloat
%                                       box to the beginning of the figure.
%                                               \\ \hline 
%       \raisebox{-1.5ex}{\cmd{\subfigcapskip}}
%                 & \raisebox{-1.5ex}{10 pt}
%                           & \M{0.0ex}\hfil 0 pt
%                                    & \rr Length between the baseline of the
%                                      subcaption and the figure.
%                                               \\ \hline
%       \raisebox{-2.1ex}{\cmd{\subfigcaptopadj}}
%                 & \raisebox{-2.1ex}{\pz0 pt}
%                           & \M{0.4ex}\hfil 3 pt
%                                    & \rr Length added to /\subfigcapskip/
%                                      when the caption is above the figure.
%                                               \\ \hline
%       \raisebox{-2.1ex}{\cmd{\subfigbottomskip}}
%                 & \raisebox{-2.1ex}{10 pt}
%                           & \M{0.7ex}\hfil 5 pt
%                                     & \rr Length from the bottom of the
%                                       subcaption to the bottom of the
%                                       subfloat.
%                                               \\ \hline
%       \raisebox{-3.5ex}{\cmd{\subfigcapmargin}}
%                 & \raisebox{-3.5ex}{10 pt}
%                           & \M{2.0ex}\hfil 0 pt 
%                                     & \rr Indentation of the subcaption from
%                                       the sides of the subfloat box.  (This
%                                       should always be positive or zero.)
%                                               \\ \hline
%       \raisebox{-1.5ex}{\cmd{\subfiglabelskip}}
%                 & \raisebox{-1.5ex}{0.33 em}
%                           & \raggedleft 0.33 em plus 0.07 em minus 0.03 em
%                                     & \rr Space between the label and the
%                                       text of the subcaption.
%                                               \\ \hline
%       \raisebox{-1.5ex}{\cmd{\subcapsize}}
%                 & \multicolumn{2}{c|}{\raisebox{-1.5ex}{footnotesize}}
%                                     & \rr Size for the text portion of the
%                                       subcaption font.
%                                               \\ \hline
%       \raisebox{-1.5ex}{\cmd{\subcaplabelfont}}
%                 & \multicolumn{2}{c|}{\raisebox{-1.5ex}{(Default family, series and shape)}}
%                                     & \rr Font for the label portion of the
%                                       subcaption.
%                                               \\ \hline
%       \raisebox{-1.5ex}{\cmd{\subcapfont}}
%                 & \multicolumn{2}{c|}{\raisebox{-1.5ex}{(Default family, series and shape)}}
%                                     & \rr Font for the text portion of the
%                                       subcaption.
%                                               \\ \hline
%     \end{tabular}
%   \end{minipage}
% \end{table}
% \DeleteShortVerb{\/}
% \MakeShortVerb{\|}
%
% \begin{macro}{\subfigtopskip}
% \begin{macro}{\subfigcapskip}
% \begin{macro}{\subfigcaptopadj}
% \begin{macro}{\subfigbottomskip}
%
% \changes{v2.1}{22 Jan 1997}{Reduced the space to the values separating
% subfloat caption and figure box and its top and bottom.  Added 
% \cmd{\subfigcaptopadj} in case it is needed in styles that with figure
% subcaptions on the bottom and table subcaptions on the top.}
% 
% See figure~\ref{fig:layout} for details of where these take effect.
% Generally the |\subfigtopskip| appears between the figure or table and
% the edge of the box.  |\subfigbottomskip| appears between the
% subcaption and the edge of the box.  If the subcaption follows the
% figure or table, then |\subfigcapskip| is placed before it along with
% ({\it i.e.\/}, in addition to) a |\baselineskip|.  If the subcaption
% comes before the figure or table then |\subfigcapskip| is placed 
% after it along with |\subfigcaptopadj|.  Although several of the above
% are {\tt skip}'s they are typset at their base size and will not
% shrink or expand.
%
%    \begin{macrocode}
\newskip\subfigtopskip     \subfigtopskip    =  5\p@
\newskip\subfigcapskip     \subfigcapskip    =  0\p@
\newdimen\subfigcaptopadj  \subfigcaptopadj  =  3\p@
\newskip\subfigbottomskip  \subfigbottomskip =  5\p@
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% 
% \begin{macro}{\subfigcapmargin}
%
% \changes{v2.1}{22 Jan 1997}{Reduced \cmd{\subfigcapmargin} to zero.}
% \begin{macro}{\subfiglabelskip}
%
% \changes{v2.1}{23 Jan 2002}{Added to replace the space between the
% subcaption label and text.}
%
% These two values are used to typeset the subcaption The width of the
% subcaption is the same as that of its associated figure or table
% width.  |\subfigcapmargin| is placed on either side of the caption and
% |\subfiglabelskip| is placed between the subcaption label and the
% subcaption text.  Depending on the manner of typesetting the
% subcaption, this may shrink or expand.  By default, the
% |\subfigcapmargin| is zero to allow as much room of the subcaption as
% possible.
%
%    \begin{macrocode}
\newdimen\subfigcapmargin  \subfigcapmargin  =  \z@
\newskip\subfiglabelskip   \subfiglabelskip  =  0.33em plus 0.07em minus 0.03em
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\subcapsize}
% 
% |\subcapsize| is used to set the size of both the subcaption label and
% the subcaption text.  The options allow it to be set to any of the
% following: |\scriptsize|, |\footnotesize|, |\small|, |\normalsize|,
% |\large|, |\Large|.  It may also be set to |\tiny|, |\LARGE|, |\huge|
% or |\HUGE| by hand if need be for special instances.
% 
%    \begin{macrocode}
\newcommand*{\subcapsize}{}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\subcaplabelfont}
% \begin{macro}{\subcaplabelfont@f}
%
% \changes{v2.1.4}{30 Apr 2002}{Changed the \cmd{\subcaplabelfont@f} 
% default value to \cmd{\familydefault}.}
%
% \begin{macro}{\subcaplabelfont@c}
%
% \changes{v2.1.4}{30 Apr 2002}{Changed the \cmd{\subcaplabelfont@c} 
% default value to \cmd{\seriesdefault}.}
%
% \begin{macro}{\subcaplabelfont@s}
%
% \changes{v2.1.4}{30 Apr 2002}{Changed the \cmd{\subcaplabelfont@s} 
% default value to \cmd{\shapedefault}.}
%
% The |\subcaplabelfont| is composed of three parts, the font family,
% such as roman, san serif or typewriter; the font series, such as
% medium or bold; and the font shape, such as italic, slanted, small
% caps or upright.  These are combined along with the |\subcapsize| to
% select the font for the subcaption label.
%
%    \begin{macrocode}
\newcommand*{\subcaplabelfont}{%
  \subcaplabelfont@f\subcaplabelfont@c\subcaplabelfont@s}
\newcommand*{\subcaplabelfont@f}{\fontfamily{\familydefault}\selectfont}
\newcommand*{\subcaplabelfont@c}{\fontseries{\seriesdefault}\selectfont}
\newcommand*{\subcaplabelfont@s}{\fontshape{\shapedefault}\selectfont}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\subcapfont}
%
% \changes{v2.1}{11 Dec 1996}{Added.}
%
% \begin{macro}{\subcapfont@f}
%
% \changes{v2.1.4}{30 Apr 2002}{Changed the \cmd{\subcapfont@f} default
% value to \cmd{\familydefault}.}
%
% \begin{macro}{\subcapfont@c}
%
% \changes{v2.1.4}{30 Apr 2002}{Changed the \cmd{\subcapfont@s} default
% value to \cmd{\seriesdefault}.}
%
% \begin{macro}{\subcapfont@s}
%
% \changes{v2.1.4}{30 Apr 2002}{Changed the \cmd{\subcapfont@s} default
% value to \cmd{\shapedefault}.}
%
% The |\subcapfont| is the same as the |\subcaplabelfont| except that it
% is applied to the subcaption text rather than the label.
% 
%    \begin{macrocode}
\newcommand*{\subcapfont}{%
  \subcapfont@f\subcapfont@c\subcapfont@s}
\newcommand*{\subcapfont@f}{\fontfamily{\familydefault}\selectfont}
\newcommand*{\subcapfont@c}{\fontseries{\seriesdefault}\selectfont}
\newcommand*{\subcapfont@s}{\fontshape{\shapedefault}\selectfont}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\ifsf@tight}
% 
% Create an `if' to control whether the check for the top-of-page is
% performed in the |\@subfloat| command.  This is necessary to preserve
% the look-and-feel of the older versions of this package.  The
% \Lopt{loose} option turns this flag off (no check) and the
% \Lopt{tight} option turns it on (do the check).
%
%    \begin{macrocode}
\newif\ifsf@tight          \sf@tighttrue
%    \end{macrocode}
% \end{macro}
%
% \subsection{Subfigure Constants}
% \label{sec:fig_constants}
% \begin{macro}{\c@subfigure}
%   Subfigure counter.
%
%    \begin{macrocode}
\newcounter{subfigure}[figure]
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\iffiguretopcap}
%
% \changes{v2.1}{23 Jan 2002}{Added check for existing 
% \cmd{\figuretopcaptrue} so that this package will work with the
% captcont package.}
%
% \changes{v2.1}{22 Jan 1997}{Added to control label numbering for
% captions at the top vs.\ at the bottom.}
%
% \begin{macro}{\ifsubfiguretopcap}
%
% \changes{v2.1}{15 Nov 1997}{Added to control placement of the
% subcaption at the top vs.\ at the bottom.}
% 
% These control how the \Lpack{subfigure} \Lcount{caption} numbering is
% obtained and where the figure caption and subcaption should appear
% relative to the body of the \Lenv{subfigure}.  The boolean
% |\iffiguretopcap| indicates that the \Lcount{caption} counter is
% current and there is no need to increment it.  The boolean
% |\ifsubfiguretopcap| indicates that the subcaption will be printed
% above the body portion of the \Lpack{subfigure}.
% 
%    \begin{macrocode}
\@ifundefined{figuretopcaptrue}{\newif\iffiguretopcap}{}
\newif\ifsubfiguretopcap
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\p@subfigure}
% \begin{macro}{\thesubfigure}
% \begin{macro}{\@thesubfigure}
% \begin{macro}{\@@thesubfigure}
%
% \changes{v2.1}{23 Jan 2002}{Added.}
% 
% The |\thesubfigure| command defines the label for text references
% (prefixed by |\p@subfigure|).  This is the value saved by the |\label|
% and retrieved by the |\ref| commands.  In the case of a
% conflict between this package and a prior one over the definition
% of |\thesubfigure|, this package will win.  This is insured by first
% specifying the |\providecommand| for the |\thesubfigure| and then
% |\renewcommand|.  This is necessary because some packages incorrectly
% insert this command.
% 
% The |\@thesubfigure| value defines the the caption label complete 
% offset from the beginning of the caption text.  It is used in the
% subfigure caption and normally takes the label portion as defined
% by |\thesubfigure|.
% 
% Finally, the value defined by |\@@thesubfigure| is also saved by the
% |\label| command and may be retrieved with the |\subref| command.  This is
% often useful in the subcaption or caption text when referring to the
% individual subfigures.  This value is also the one that is used in
% the List-of-Figures.
% 
% These multiple ``views'' of the \Lcount{subfigure} counter allow a
% style to define the way the label looks in the figure, for example
% ``{\bf (a)}\textvisiblespace''.  Then references to it with |\ref|
% have the form ``2.1a'', and with |\subref| ``(a)'' (This latter form
% is also used to label references in the List-of-Figures section).
% 
%    \begin{macrocode}
\let\p@subfigure=\thefigure
\providecommand*{\thesubfigure}{(\alph{subfigure})}
\renewcommand*{\thesubfigure}{(\alph{subfigure})}
\newcommand*{\@thesubfigure}{\thesubfigure\hskip\subfiglabelskip}
\newcommand*{\@@thesubfigure}{\thesubfigure}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\ext@subfigure}
% \begin{macro}{\l@subfigure}
%
% \changes{v2.1}{11 Oct 1996}{Changed the indentation of the 
% List-of-Figures line from 2.3em to 2.5em.}
%
% \begin{macro}{\c@lofdepth}
% 
% These values define how and if the subfigure caption will appear in a
% List-of-Figures file.  |\ext@subfigure| defines the default subfigure
% file extension (which is the same as |\ext@figure| --- the
% List-of-Figures file, \Lcount{lof}).  |\l@subfigure|
% shows how to print an \Lfile{lof} subfigure line and defines that line
% at level two.  |\c@lofdepth| is an extension of the Table-of-Contents
% depth value and controls the depth to which captions in the file are
% printed to the actual page.  By default, the subcaptions are not.
%
%    \begin{macrocode}
\let\ext@subfigure=\ext@figure
%    \end{macrocode}
%
%    \begin{macrocode}
\newcommand*{\l@subfigure}{%
  \@dottedxxxline{\ext@subfigure}{2}{3.8em}{2.5em}}
%    \end{macrocode}
%
%    \begin{macrocode}
\newcounter{lofdepth}
\setcounter{lofdepth}{1}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsection{Subtable Constants}
% This section is symmetric to section~\ref{sec:fig_constants}.
% \begin{macro}{\c@subtable}
%   Subtable counter.
%
%    \begin{macrocode}
\newcounter{subtable}[table]
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\iftabletopcap}
%
% \changes{v2.1}{23 Jan 2002}{Added check for existing 
% \cmd{\tabeltopcaptrue} so that this package will work with the
% captcont package.}
%
% \changes{v2.1}{22 Jan 1997}{Added to control label numbering for
% captions at the top vs.\ at the bottom.}
%
% \begin{macro}{\ifsubtabletopcap}
% \changes{v2.1}{15 Nov 1997}{Added to control placement of the
% subcaption at the top vs.\ at the bottom.}
% 
% These define the form that the subcaption prefix is generated.  The
% boolean |\iftabletopcap| works with the numbering of the subcaption
% label and uses the current \Lcount{table} counter value if true and
% the next value if false.  The boolean |\ifsubtabletopcap| sets the
% subcaption before the main body of the subfigure, if true; and, after
% it, if false.
%
%    \begin{macrocode}
\@ifundefined{tabletopcaptrue}{\newif\iftabletopcap}{}
\newif\ifsubtabletopcap
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\p@subtable}
% \begin{macro}{\thesubtable}
% \begin{macro}{\@thesubtable}
% \begin{macro}{\@@thesubtable}
%
% \changes{v2.1}{23 Jan 2002}{Added.}
% 
% The |\thesubtable| command defines the label for text references
% (prefixed by |\p@subtable|), while the |\@thesubtable| command defines
% what appears in the subcaption under or over the subtable.  The
% |\@@thesubtable| command defines an alternative reference to the label
% for use in the subcaption and caption of the table (see the discussion
% above for the equivalent figure values).  The latter form is also used
% for the List-of-Tables label.  As above, the |\thesubtable| command is
% twice specified
%
%    \begin{macrocode}
\let\p@subtable=\thetable
\providecommand*{\thesubtable}{(\alph{subtable})}
\renewcommand*{\thesubtable}{(\alph{subtable})}
\newcommand*{\@thesubtable}{\thesubtable\hskip\subfiglabelskip}
\newcommand*{\@@thesubtable}{\thesubtable}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\ext@subtable}
% \begin{macro}{\l@subtable}
%
% \changes{v2.1}{11 Oct 1996}{Changed the indentation of the 
% List-of-Tables line from 2.3em to 2.5em.}
%
% \begin{macro}{\c@lotdepth}
% 
% These define how and if the subtable caption will appear in a
% List-of-Tables file.  |\ext@subtable| defines the default subtable
% file extension (which is the same as |\ext@table| --- the
% List-of-Tables file, \Lcount{lot}).  |\l@subtable| shows how to print
% an \Lfile{lot} subtable line and defines that line at level two.
% |\c@lotdepth| is an extension of the table-of-contents depth value and
% controls the depth to which captions in the file are printed to the
% actual page.  By default, the subcaptions are not printed.
%
%    \begin{macrocode}
\let\ext@subtable=\ext@table
%    \end{macrocode}
%
%    \begin{macrocode}
\newcommand*{\l@subtable}{%
  \@dottedxxxline{\ext@subtable}{2}{3.8em}{2.5em}}
%    \end{macrocode}
%
%    \begin{macrocode}
\newcounter{lotdepth}
\setcounter{lotdepth}{1}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsection{Declaration of Options}
% 
% The following options allow general compatibility with the
% \Lpack{caption} and \Lpack{caption2} packages by H.A. Sommerfeldt
% \cite{Somm95a}.  There are six different subcaption layout options
% supported: \Lopt{normal}, \Lopt{hang} (or \Lopt{isu}), \Lopt{center},
% \Lopt{centerlast} (or \Lopt{anne}), \Lopt{nooneline} and
% \Lopt{raggedright}.  The \Lopt{hang} subcaption may be combined with
% the \Lopt{center} or \Lopt{centerlast} options. The \Lopt{nooneline}
% may be combined with any of the other options (but it's effect is
% negated or looks bad with either of \Lopt{center} or \Lopt{centerlast}
% unless the \Lopt{hang} option is also used).  \Lopt{raggedright}
% overrides the \Lopt{center} or \Lopt{centerlast} options.
% 
%    \begin{macrocode}
\DeclareOption{normal}{%
  \subcaphangfalse
  \subcapcenterfalse
  \subcapcenterlastfalse
  \subcapnoonelinefalse
  \subcapraggedrightfalse}
%    \end{macrocode}
%
%    \begin{macrocode}
\DeclareOption{hang}{\subcaphangtrue}
\DeclareOption{center}{\subcapcentertrue}
\DeclareOption{centerlast}{\subcapcenterlasttrue}
\DeclareOption{nooneline}{\subcapnoonelinetrue}
\DeclareOption{raggedright}{\subcapraggedrighttrue}
%    \end{macrocode}
%
%    \begin{macrocode}
\DeclareOption{isu}{\ExecuteOption{hang}}
\DeclareOption{anne}{\ExecuteOption{centerlast}}
%    \end{macrocode}
%
% \newpage^finalhack
%
% \noindent
% There are options for six different font sizes available.
%
%    \begin{macrocode}
\DeclareOption{scriptsize}{\renewcommand*{\subcapsize}{\scriptsize}}
\DeclareOption{footnotesize}{\renewcommand*{\subcapsize}{\footnotesize}}
\DeclareOption{small}{\renewcommand*{\subcapsize}{\small}}
\DeclareOption{normalsize}{\renewcommand*{\subcapsize}{\normalsize}}
\DeclareOption{large}{\renewcommand*{\subcapsize}{\large}}
\DeclareOption{Large}{\renewcommand*{\subcapsize}{\Large}}
%    \end{macrocode}
%
% \noindent
% There are eighteen options available to set the font attributes of the
% subcaptions.  The first nine affect only the subcaption label
% The last nine affect only the subcaption text.
%
% \changes{v2.1}{22 Jan 1997}{Changed order of font options.}
%
% \changes{v2.1}{15 Nov 1997}{Added nine new options to set the format
% of the caption text separately from the caption label.}
%
%    \begin{macrocode}
\DeclareOption{rm}{\renewcommand*{\subcaplabelfont@f}{\rmfamily}}
\DeclareOption{sf}{\renewcommand*{\subcaplabelfont@f}{\sffamily}}
\DeclareOption{tt}{\renewcommand*{\subcaplabelfont@f}{\ttfamily}}
\DeclareOption{md}{\renewcommand*{\subcaplabelfont@c}{\mdseries}}
\DeclareOption{bf}{\renewcommand*{\subcaplabelfont@c}{\bfseries}}
\DeclareOption{up}{\renewcommand*{\subcaplabelfont@s}{\upshape}}
\DeclareOption{it}{\renewcommand*{\subcaplabelfont@s}{\itshape}}
\DeclareOption{sl}{\renewcommand*{\subcaplabelfont@s}{\slshape}}
\DeclareOption{sc}{\renewcommand*{\subcaplabelfont@s}{\scshape}}
%    \end{macrocode}
%
%    \begin{macrocode}
\DeclareOption{RM}{\renewcommand*{\subcapfont@f}{\rmfamily}}
\DeclareOption{SF}{\renewcommand*{\subcapfont@f}{\sffamily}}
\DeclareOption{TT}{\renewcommand*{\subcapfont@f}{\ttfamily}}
\DeclareOption{MD}{\renewcommand*{\subcapfont@c}{\mdseries}}
\DeclareOption{BF}{\renewcommand*{\subcapfont@c}{\bfseries}}
\DeclareOption{IT}{\renewcommand*{\subcapfont@s}{\itshape}}
\DeclareOption{SL}{\renewcommand*{\subcapfont@s}{\slshape}}
\DeclareOption{SC}{\renewcommand*{\subcapfont@s}{\scshape}}
\DeclareOption{UP}{\renewcommand*{\subcapfont@s}{\upshape}}
%    \end{macrocode}
%
% \noindent
% There are eight options available to control the caption placement
% and the proper numbering in association with the figure or table 
% caption placement.  The first four affect only the caption numbering
% by informing the internals that the associated figure or table
% caption appears before or after the subfloat.  The second four do
% this and, in addition, shift the subfloat caption to the bottom or
% top of the subfloat.  The |\subfigure| and |\subtable| commands each
% have a set of flags since it is often the case that a document style
% requires that figure captions follow the figure and table captions
% precede the table.
%
%    \begin{macrocode}
\DeclareOption{figbotcap}{\figuretopcapfalse}
\DeclareOption{figtopcap}{\figuretopcaptrue}
\DeclareOption{tabbotcap}{\tabletopcapfalse}
\DeclareOption{tabtopcap}{\tabletopcaptrue}
%    \end{macrocode}
%
%    \begin{macrocode}
\DeclareOption{FIGBOTCAP}{\ExecuteOptions{figbotcap}\subfiguretopcapfalse}
\DeclareOption{FIGTOPCAP}{\ExecuteOptions{figtopcap}\subfiguretopcaptrue}
\DeclareOption{TABBOTCAP}{\ExecuteOptions{tabbotcap}\subtabletopcapfalse}
\DeclareOption{TABTOPCAP}{\ExecuteOptions{tabtopcap}\subtabletopcaptrue}
%    \end{macrocode}
%
% \begin{macro}{\subfigtopskip}
% \begin{macro}{\subfigcapskip}
% \begin{macro}{\subfigcaptopadj}
% \begin{macro}{\subfigbottomskip}
% \begin{macro}{\subfigcapmargin}
% \begin{macro}{\subfiglabelskip}
%
% \noindent
% The last two options control the overall ``look-and-feel'' of the
% subfloat.  The \Lopt{loose} option is the default and makes the
% subfloat look like it always has with lots of extra room around the
% subfigure and subcaption.
% 
%    \begin{macrocode}
\DeclareOption{loose}{%
  \subfigtopskip    = 10\p@
  \subfigcapskip    = 10\p@
  \subfigcaptopadj  =  0\p@
  \subfigbottomskip = 10\p@
  \subfigcapmargin  = 10\p@
  \subfiglabelskip  =  0.33em
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% 
% \begin{macro}{\@thesubfigure}
% \begin{macro}{\@thesubtable}
% Next, it replaces the glue at the end of the subcaption label with a
% |\space| like the older version of the \Lpack{subfigure} package.
% 
%    \begin{macrocode}
  \renewcommand*{\@thesubfigure}{\thesubfigure\space}
  \renewcommand*{\@thesubtable}{\thesubtable\space}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% 
% \begin{macro}{\ifsf@tight}
% 
% Finally, set the \Lif{sf@tight} flag to make the |\@subfloat| command
% skip its check for the top of a page or minipage and to always add
% its topmost vertical spacing.  (For more details about the
% |\@subfloat| command, see section~\ref{sec:mainmacros}.)
% 
%    \begin{macrocode}
  \sf@tightfalse}
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\subfigtopskip}
% \begin{macro}{\subfigcapskip}
% \begin{macro}{\subfigcaptopadj}
% \begin{macro}{\subfigbottomskip}
% \begin{macro}{\subfigcapmargin}
% \begin{macro}{\subfiglabelskip}
%
% The \Lopt{tight} option is the is the preferred version and has less white
% space around the subfloat.  It also will omit the space above the subfloat
% at the top of the page or minipage.
%
%    \begin{macrocode}
\DeclareOption{tight}{%
  \subfigtopskip    =  5\p@
  \subfigcapskip    =  0\p@
  \subfigcaptopadj  =  3\p@
  \subfigbottomskip =  5\p@
  \subfigcapmargin  =  \z@
  \subfiglabelskip  =  0.33em plus 0.07em minus 0.03em
%    \end{macrocode}
%
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@thesubfigure}
% \begin{macro}{\@thesubtable}
% Next, it keeps the glue at the end of the subcaption label to allow
% better subcaption fitting.
%
%    \begin{macrocode}
  \renewcommand*{\@thesubfigure}{\thesubfigure\hskip\subfiglabelskip}
  \renewcommand*{\@thesubtable}{\thesubtable\hskip\subfiglabelskip}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% 
% \begin{macro}{\ifsf@tight}
% 
% Finally, set the \Lif{sf@tight} flag to make the |\@subfloat| command
% check for the top of a page or minipage and to skip adding any vertical
% space there.  (For more details about the |\@subfloat| command, see
% section~\ref{sec:mainmacros}.)
%
%    \begin{macrocode}
  \sf@tighttrue}
%    \end{macrocode}
% \end{macro}
%
% \newpage^finalhack
%
% \subsection{Execution of Options}
% \label{sec:startup}
%
% \changes{v2.1}{11 Oct 1996}{Added a check for a local configuration file.}
%
% \changes{v2.1}{15 Nov 1997}{Added the \Lopt{FIGBOTCAP} and 
% \Lopt{TABBOTCAP} options.}
% 
% \changes{v2.1.4}{30 Apr 2002}{Changed the subcaption label defaults
% to be hard coded above and no longer in the options list.}
% 
% The \Lopt{normal} type of subcaption is preselected, the standard
% subcaption size is set to \Lopt{footnotesize}, and the font for both
% the subcaption label and text is set above to the global defaults for
% family, series, and shape.  Also, the subcaptions for the subfigure
% and subtable are placed after the figure box and it is assumed that
% the figure or table caption follows all of the associated subfloats.
% Finally, the \Lopt{loose} form is selected in order to cause minimal
% change to existing papers using the \Lpack{subfigure} package.
% 
% The preferred form would be to have the \Lopt{TABTOPCAP} and
% \Lopt{tight} be the defaults, but this would adversely affect the
% existing papers that have used the official releases of this package.
% 
%    \begin{macrocode}
\ExecuteOptions{normal,footnotesize,FIGBOTCAP,TABBOTCAP,loose}
\InputIfFileExists{subfigure.cfg}{%
  \typeout{****************************************^^J%
           * Local config file subfigure.cfg used *^^J%
           ****************************************}}{}
\ProcessOptions
%    \end{macrocode}
%
% \subsection{The Subfigure and Subtable Commands}
% \label{sec:mainmacros}
%
% \changes{v2.1}{23 Jan 2002}{Added setting \cmd{\label} to 
% \cmd{\subfloat@label}.}
%
% \changes{v2.1}{11 Oct 1996}{Added command lines.  The subfigure
% command was updated to allow a second optional argument.  This 
% causes changes all the way down to the \cmd{\@subcaption} command.}
%
% \begin{macro}{\subfigure}
% \label{sec:subfigure}
%
% \changes{v2.1.2}{26 Mar 2002}{Added check to see if \cmd{\subfig@oldlabel}
% is defined and if not to save the current definition.}
%
% \changes{v2.1}{22 Jan 1997}{Changed the counter advance to occur
% only if the related boolean is false.  This allows \cmd{\caption}'s
% to occur before the subfloats rather than after.}
%
% \changes{v2.1}{07 Mar 1997}{Moved \cmd{\leavevmode} to \cmd{\@subfloat}.}
% 
% The |\subfigure| command acts as cover function for the |\@subfloat|
% command.  It locally changes the |\label| command to our special version
% that supports the |\subref|'s (see section~\ref{sec:patches}).  It
% insures that the proper counter is used and has the correct value.
% Since the caption is usually generated later, we must locally
% anticipate the future value of its counter by adding one to it within
% a local group.  Upon leaving |\subfigure|, the old value is restored.
%
%    \begin{macrocode}
\newcommand*{\subfigure}{%
  \bgroup
    \let\subfig@oldlabel=\label
    \let\label=\subfloat@label
    \@nameuse{if\@captype topcap}\else
      \advance\@nameuse{c@\@captype}\@ne
    \fi
    \refstepcounter{sub\@captype}%
    \@ifnextchar [%
      {\@subfigure}%
      {\@subfigure[\@empty]}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\subtable}
%
% The |\subtable| command is identical to |\subfigure|.  The of names
% at the user level is purely cosmetic (and historical). 
%
%    \begin{macrocode}
\let\subtable=\subfigure
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@subfigure}
% \changes{v2.1.4}{07 Jun 2002}{Added curly brackets around the
% argument when passing it on as an optional argument.}
%
% Here we are still setting up for the main |\@subfloat| command.  We
% check for a second optional argument.  If one is not found, than any
% optional argument from the last |\subfigure| or |\subtable| becomes
% the main caption and we give |\@empty| as the default list-entry
% caption.  If we see another optional argument, then we make that one 
% the main caption and use any prior optional argument as the list-entry
% caption.  See Table~\ref{tab:calling} for how this looks to the user.
% 
%    \begin{macrocode}
\def\@subfigure[#1]{%
    \@ifnextchar [%
      {\@subfloat{sub\@captype}[{#1}]}%
      {\@subfloat{sub\@captype}[\@empty{#1}][{#1}]}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@subfloat}
%
% \changes{v2.1.4}{24 Apr 2002}{Changed \cmd{\@subfloat} to globally
% reset the figure/table counter if it was incremented so that any 
% subfloat body that resets the counters globally will not cause
% errors ({\it e.g.\/}, the \Lpack{tabularx} package}
%
% \changes{v2.1}{23 Jan 2002}{Now using \cmd{\@nameuse} to build names.
% Made the \cmd{\def} a \cmd{\long}\cmd{\def}.}
%
% \changes{v2.1}{22 Apr 1998}{Added some percents to keep out whitespace}
%
% \changes{v2.1}{07 Mar 1997}{Changed the addition of the 
%  \cmd{\subfigtopskip} to be added only if not at the top of the
%  float and only in vertical mode.  Moved \cmd{\leavevmode} from
%  \cmd{\subfigure} to after the topskip addition.} 
%
% \changes{v2.1}{17 Jan 1997}{Added swap of the top and bottom space
%  when in TOPCAP mode.}
% 
% This is the common code for setting up the subfloat box and drawing
% the subcaption under it.  The two skips are used only here to keep
% track of what vertical space is to be placed before and after the
% figure.
% 
% The first argument is the type of object being generated: that is,
% a |subfigure| or a |subtable|.  The second and third are the
% \texttt{subcaption} and \texttt{subfigure} arguments from the
% calling |\subfigure| or |\subtable| command. 
%
%    \begin{macrocode}
\newskip\subfig@top
\newskip\subfig@bottom
%    \end{macrocode}
% 
% If \Lif{ifsf@tight} is true, then the |\@subfloat| command checks to
% see if it is at the top of a page or a minipage and will suppress the
% top vertical space in that case; otherwise, it always adds the space.
%
%    \begin{macrocode}
\long\def\@subfloat#1[#2][#3]#4{%
    \@tempcnta=1
    \ifsf@tight 
      \if@minipage
        \@tempcnta=\z@
      \else\ifdim \lastskip=\z@ \else
        \@tempcnta=2
      \fi\fi
    \fi
%    \end{macrocode}
% 
% Based on the |\iffiguretopcap| or |\iftabletopcap| flags we
% select which vertical space is to be placed above and below the figure
% or table and save it in |\subfig@top| and |\subfig@bottom|.
%
%    \begin{macrocode}
    \@nameuse{if\@captype topcap}%
      \subfig@top=\subfigbottomskip
      \subfig@bottom=\subfigtopskip
    \else
      \subfig@top=\subfigtopskip
      \subfig@bottom=\subfigbottomskip
    \fi
%    \end{macrocode}
% 
% The |\leavevmode| is here to inhibit any \LaTeX\ errors that the
% surreounding environment might generate if we stay in vertical mode.
% Then it determines the width of the figure or table by placing it in a
% box and testing the box.
%
%    \begin{macrocode}
    \leavevmode
    \setbox\@tempboxa \hbox{#4}%
    \@tempdima=\wd\@tempboxa
%    \end{macrocode}
% 
% Finally we put the figure together in a vertical box.  At the very top
% goes any vertical space, but only if we are not at the top of the page
% or minipage as determined above.
%
%    \begin{macrocode}
    \vtop\bgroup
      \vbox\bgroup
        \ifcase\@tempcnta
          \@minipagefalse
        \or
          \vspace{\subfig@top}%
        \or
          \ifdim \lastskip=\z@ \else
            \@tempskipb\subfig@top\relax\@xaddvskip
          \fi
        \fi
%    \end{macrocode}
% 
% Next, based on the `topcap' flags, we check if the subcaption or the
% figure goes next.  If it is the subcaption, then we add some extra
% |\subfigcaptopadj| space between the subcaption and the figure and
% table in addtion to the regular |\subfigcapskip| space.  This finishes
% off the top box and establishes our baseline.
% 
% After that we add in either the figure or subcaption (whichever we
% have not typeset yet and follow it with the bottom vertical space.
% (see figure~\ref{fig:layout-C} for a diagram of this layout).
% 
% Finally, we globally ({\bf !}) reset the \Lcount{figure} or
% \Lcount{table} counter, if we incremented it at the beginning of the
% |\subfigure| or |\subtable| command so that any functions used inside
% the command body which globally sets the counters ({\it e.g.\/}, the
% \Lpack{tabularx} package) will not cause problems.
%
%    \begin{macrocode}
        \@nameuse{if#1topcap}%
          \ifx \@empty#3\relax \else
            \@subcaption{#1}{#2}{#3}%
            \vskip\subfigcapskip
            \vskip\subfigcaptopadj
          \fi\egroup
          \box\@tempboxa
        \else
          \box\@tempboxa\egroup
          \ifx \@empty#3\relax \else
            \vskip\subfigcapskip
            \@subcaption{#1}{#2}{#3}%
          \fi
        \fi
      \vspace{\subfig@bottom}%
    \egroup
    \@nameuse{if\@captype topcap}\else
      \global\advance\@nameuse{c@\@captype}\m@ne
    \fi
  \egroup}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@subfigcaptionlist}
%
% \begin{macro}{\@subcaption}
%
% \changes{v2.1}{23 Jan 2002}{Now using \cmd{\@nameuse} to build names.
% Also use \@@thesubfigure and \@@thesubtable stored label.}
%
% \begin{macro}{\listsubcaptions}
%
% \changes{v2.1.4}{09 Jul 2002}{Changed \cmd{\@tempa} to \cmd{\sf@temp}
% at the request of Donald Arseneau to remove the potential of problems
% with others using the same variable.}
% \changes{v2.1}{22 Oct 1996}{Added to allow the user to cause a dump
% of the currently queued subcaptions to the ``List-of'' page.  This
% is necessary when the \cmd{caption} is placed before the subfloats
% as is often the case for subtables.}
%
% \changes{v2.1}{11 Oct 1996}{Fixed \cmd{\protect} related bug caused by
% a change in \LaTeX3.}
% \begin{macro}{\@listsubcaptions}
%
% \changes{v2.1}{23 Jan 2002}{Added checks for undefined \cmd{\@captype}
% and \cmd{ext@<\@captype>} just in case the \cmd{caption} is called
% outside the \Lenv{float} or the current float type does not support
% subfigures.}
%
% \changes{v2.1}{11 Oct 1996}{Added to print the queued subcaptions.
% This is also used by the \Lpack{captcont} package to correctly print
% the subcaptions.}
%
% \changes{v2.1}{17 Jan 1997}{Changed the source of the label for the
% ``List-of'' pages to use the \cmd{\thesubfigure} or \cmd{\thesubtable}
% value rather than the \cmd{\@currentlabel}.  This usually will be
% cleaner since the figure number won't be repeated.}
%
% \changes{v2.1}{05 Jan 1998}{Changed \cmd{\edef} to \cmd{\def} and added
% back the \cmd{\protect} due to changes in the use of the 
% \cmd{\@subcaption}.}
%
% The following series of commands control exactly how the subcaption is
% typeset.  The |\@subcaption| command adds the subcaption to the current
% list of subcaptions to be added to the ``List-of'' page as soon as
% the major caption is declared (see |\@caption| below). 
% ({\scshape Note}: only one list is kept because that seems right;
% if there is a mix of tables and figures, they will be grouped
% under the next |\caption|\@.)  Next |\@subcaption| calls the
% appropriate float-type specific command to decide how to size and shape
% the subcaption text.
%
%    \begin{macrocode}
\newcommand*{\@subfigcaptionlist}{}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand{\@subcaption}[3]{%
  \ifx \relax#2\relax \else
    \bgroup
      \let\label=\@gobble
      \let\protect=\string
      \def\@subcaplabel{\@nameuse{@@the#1}}%
      \xdef\@subfigcaptionlist{%
        \@subfigcaptionlist,%
        {\protect\numberline{\@subcaplabel}\noexpand{\ignorespaces #2}}}%
    \egroup
  \fi
  \@nameuse{@make#1caption}{\@nameuse{@the#1}}{#3}}
%    \end{macrocode}
%
%    \begin{macrocode}
\newcommand*{\listsubcaptions}{%
  \@ifstar
    {\gdef\@subfigcaptionlist{}}%
    {\@listsubcaptions{\@captype}}}
%    \end{macrocode}
%
%    \begin{macrocode}
\newcommand*{\@listsubcaptions}[1]{%
  \@ifundefined{@captype}{}{%
    \@ifundefined{ext@sub#1}{}{%
      \@for \sf@temp:=\@subfigcaptionlist \do {%
        \ifx \@empty\sf@temp\relax \else
          \addcontentsline
            {\@nameuse{ext@sub#1}}%
            {sub#1}%
            {\sf@temp}%
        \fi}}}%
  \gdef\@subfigcaptionlist{}}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@makesubfigurecaption}
% \begin{macro}{\@makesubtablecaption}
%
% \changes{v2.1}{17 Jan 1997}{Added the new font control.}
%
% By default, the |\@subfigurecaption| and |\@subtablecaption|
% commands are identical.  Unlike the standard |\@makecaption| command,
% we assume that the first argument (the label number produced by
% the |\@thesubfigure| or the |\@thesubtable|) contains any trailing
% separator characters or spacing (which makes it easier to customize).
% 
% \newpage^finalhack
%
% The |\@makesubfigurecaption| command first checks the size of the
% caption typeset as a single line.  It knocks off twice the
% |\subfigcapmargin| (at it's regular size) to determine the with of the
% caption and label.
%
%    \begin{macrocode}
\newcommand{\@makesubfigurecaption}[2]{%
  \setbox\@tempboxa\hbox{%
    \subcapsize
    {\subcaplabelfont #1}%
    {\subcapfont\ignorespaces #2}}%
  \@tempdimb=-\subfigcapmargin
  \multiply\@tempdimb\tw@
  \advance\@tempdimb\@tempdima
%    \end{macrocode}
%
% Next it creates a horizontal box of that width and if the label plus
% the text was too wide or if the \Lif{subcapnooneline} flag is true,
% then it sends off the label and subcaption to |\subfig@caption| to
% typset as a paragraph.  NOTE: |\subfig@caption| assumes that
% |\@tempbdimb| has the calculated width for the paragraph.
% 
% If the label plus the text will fit and the \Lif{subcapnooneline} flag
% is false, then we just return them (from box |\@tempboxa|).
% 
%    \begin{macrocode}
  \hbox to\@tempdima{%
    \hss
    \ifdim \wd\@tempboxa >\@tempdimb
      \subfig@caption{#1}{#2}%
    \else\ifsubcapnooneline
      \subfig@caption{#1}{#2}%
    \else
      \box\@tempboxa
    \fi\fi
    \hss}}
%    \end{macrocode}
%
%    \begin{macrocode}
\let\@makesubtablecaption=\@makesubfigurecaption
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\subfig@caption}
%
% \changes{v2.1}{23 Jan 2002}{Added \cmd{\subcapfont} and
% \cmd{\ignorespaces} before the caption text. So that it does not 
% interfere with the label font settings. This fixes a bug found by
% Axel Sommerfeldt.}
%
% \begin{macro}{\subfig@captionpar}
%
% \changes{v2.1}{23 Jan 2002}{Simplified by removing the font settings. 
% It is up to the caller to enforce these!  This fixes a bug found by
% Axel Sommerfeldt.}
%
% \changes{v2.1}{17 Jan 1997}{Added the new font control.}
% 
% These commands are called to typeset a multiple-line subcaption (or a
% single line when \Lif{subcapnooneline} is true).  Depending on the
% \Lif{subcapcenter} and \Lif{subcapcenterlast} flags, the text will be
% justified (both false), centered (\Lif{subcapcenter} true), or
% justified with the last line centered (only the flag
% \Lif{subcapcenterlast} set true).
%
%    \begin{macrocode}
\newcommand{\subfig@caption}[2]{%
  \ifsubcaphang
    \sbox{\@tempboxa}{\subcapsize\subcaplabelfont #1}%
    \addtolength{\@tempdimb}{-\wd\@tempboxa}%
    \usebox{\@tempboxa}%
    \subfig@captionpar{\@tempdimb}{%
      {\subcapfont\ignorespaces #2}}%
  \else
    \subfig@captionpar{\@tempdimb}{%
      {\subcaplabelfont #1}%
      {\subcapfont\ignorespaces #2}}%
  \fi}
%    \end{macrocode}
%
%    \begin{macrocode}
\newcommand{\subfig@captionpar}[2]{%
  \parbox[t]{#1}{%
    \subcapsize
    \ifsubcapraggedright
      \setlength{\leftskip}{\z@}%
      \setlength{\@rightskip}{\@flushglue}%
      \setlength{\rightskip}{\@rightskip}%
      \setlength{\parindent}{\z@}%
    \else\ifsubcapcenter
      \setlength{\leftskip}{\@flushglue}%
      \setlength{\rightskip}{\@flushglue}%
      \setlength{\parfillskip}{\z@skip}%
    \else\ifsubcapcenterlast
      \addtolength{\leftskip}{\z@ plus 1fil}%
      \addtolength{\rightskip}{\z@ plus -1fil}%
      \setlength{\parfillskip}{\z@ plus 2fil}%
    \fi\fi\fi
    #2}}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \subsection{Patches to the Standard Environment}
% \label{sec:patches}
% 
% The following adjust the standard environment for the
% \Lpack{subfigure} package.  They are designed as wrappers to the
% current definition of the standard commands to minimize any chance of
% conflict with other packages or to extend \LaTeX.
%
% \begin{macro}{\@dottedxxxline}
% \label{sec:dl}
%   This is a generalized wrapper for the |\@dottedtocline| command.
%   It checks for the level based on the output file (first argument)
%   and not using only |\@tocdepth|.  (See section~\ref{sec:listof}
%   for a description of the arguments.)
%
%    \begin{macrocode}
\newcommand*{\@dottedxxxline}[6]{%
  \ifnum #2>\@nameuse{c@#1depth}\else
    \@dottedtocline{0}{#3}{#4}{#5}{#6}
  \fi}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\subfig@end@float}
% \begin{macro}{\subfig@end@dblfloat}
% \begin{macro}{\end@float}
% \begin{macro}{\end@dblfloat}
%
% \changes{v2.1}{05 Jan 1998}{Added this section to minimize the need
% for \cmd{\listofcaptions}.}
%
% These commands patch the end of the \Lenv{float} environment so that it will
% dump out the subcaptions if any remain at this point.  This can occur
% when using the \Lopt{TOPCAP} options.
%    \begin{macrocode}
\let\subfig@end@float=\end@float
%    \end{macrocode}
%
%    \begin{macrocode}
\renewcommand*{\end@float}{%
  \@listsubcaptions{\@captype}%
  \subfig@end@float}
%    \end{macrocode}
%
%    \begin{macrocode}
\let\subfig@end@dblfloat=\end@dblfloat
%    \end{macrocode}
%
%    \begin{macrocode}
\renewcommand*{\end@dblfloat}{%
  \@listsubcaptions{\@captype}%
  \subfig@end@dblfloat}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \newpage^finalhack
% \enlargethispage{3\baselineskip}^finalhack
%
% \begin{macro}{\subfig@oldcaption}
% \begin{macro}{\@caption}
%
% \changes{v2.1}{23 Jan 2002}{Now using \cmd{\@nameuse} to build names.
% Added a check for topcap flag.  If it is not defined, we assume that
% this float type does not support subfigures.}
%
% \changes{v2.1}{05 Jan 1998}{Changed to print the subcaptions before
% or after the caption, depending on the TOPCAP setting of the current
% environment.}
%
% Next, we redefine the current |\@caption| command to dump any
% subcaptions saved.  First the `old' caption command is called to
% add the line to the ``List-of'' file and then the list of
% subcaptions, |\@subfigcaptionlist| is written to the same file. 
% Lastly, the |\@subfigcaptionlist| is reinitialized.
%
%    \begin{macrocode}
\let\subfig@oldcaption=\@caption
%    \end{macrocode}
%
%    \begin{macrocode}
\long\def\@caption#1[#2]#3{%
  \@ifundefined{if#1topcap}%
    {\subfig@oldcaption{#1}[{#2}]{#3}}%
    {\@nameuse{if#1topcap}%
       \@listsubcaptions{#1}%
       \subfig@oldcaption{#1}[{#2}]{#3}%
     \else
       \subfig@oldcaption{#1}[{#2}]{#3}%
       \@listsubcaptions{#1}%
     \fi}}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\subfig@oldlabel}
% 
% To support the redefinition of the |\label| command within the body of
% the subfloats, we will use |\subfig@oldlabel| to save the current
% definition of |\label| and create the |\subfloat@label| command to take its
% place during the processing of the |\subfigure| command.  Since the 
% definition of |\label| may change as packages are loaded, we save the
% definition each time that |\label| is replaced with |\sub@label|
% (see \ref{sec:subfigure} above).
% 
%    \begin{macrocode}
\let\subfig@oldlabel=\relax
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\subfloat@label}
% \begin{macro}{\sub@label}
%
% \changes{v2.1.4}{02 Jul 2002}{Added reference to this command via
% the name \cmd{subfloat@label} to avoid packages that replace the
% name without the support of the optional argument.  The old name
% is still here to decoy the other packages.  Added chapter number
% in the automatically generated label to increase uniqueness.}
%
% One difference from the regular |\label| command is that there is an
% optional argument (note with parentheses rather than square brackets)
% that is only used with the \Lpack{hyperref} package to define the
% {\em bookmark\/} argument to the label.  Typically, this would be a
% copy or paraphrase of the subcaption text.  If this is not given and
% the \Lpack{hyperref} package is being used, then the {\em bookmark\/}
% argument is of the form ``Subfigure\textvisiblespace 1(a)''.
% 
%    \begin{macrocode}
\newcommand*{\subfloat@label}{%
  \@ifnextchar(
    {\sf@sub@label}
    {\sf@sub@label(Sub\@captype\space
                   \@ifundefined{thechapter}{}{%
                     \@nameuse{thechapter}\space}%
                   \@nameuse{p@sub\@captype}%
                   \@nameuse{thesub\@captype}.)}}
%    \end{macrocode}
%    \begin{macrocode}
\let\sub@label\subfloat@label
%    \end{macrocode}
%
% \end{macro}
% \end{macro}
%
% \begin{macro}{\sf@sub@label}
%
% \changes{v2.1.4}{02 Jul 2002}{Moved \cmd{\relax} from the 
% \cmd{\sf@@sub@label} to here.}
%
% \changes{v2.1.1}{15 Mar 2002}{Added coordination with the hyperref
% package.}
% 
% The |\sf@sub@label| parses the optional argument and (if the 
% \Lpack{hyperref} Package is loaded) saves the {\em bookmark\/} text
% as |\@currentlabelname|.  It then calls the |\sf@@sub@label| command
% to the real processing of the label.
% 
%    \begin{macrocode}
\def\sf@sub@label(#1)#2{%
  \ifhyperrefloaded
    \protected@edef\@currentlabelname{%
      \expandafter\strip@period #1\relax.\relax\@@@}%
  \fi
  \sf@@sub@label{#2}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\sf@@sub@label}
%
% \changes{v2.1.4}{02 Jul 2002}{Moved \cmd{\relax} from here to the 
% \cmd{\sf@sub@label}.}
%
% \changes{v2.1.2}{26 Mar 2002}{Changed to simplify the operation and
% to avoid a bug in the hyperref package.}
%
% \changes{v2.1.1}{15 Mar 2002}{Added coordination with the hyperref
% package.}
% 
% In order to support the \Lpack{hyperref} package we check if it was
% loaded and use the proper form of the |\newlabel| command. |\sf@@sub@label|
% operates by first calling the old |\label| definition (which adds a
% |\newlabel| command to the \Lfile{*.aux} file) and then adds another
% |\newlabel| command to the \Lfile{*.aux} file with a similar reference
% name (with `sub@' prepended) and the value of |\@@thesubfigure| or
% |\@@thesubtable|.
% 
% If the |\ifhyperrefloaded| flag is set, then the |\newlabel| command
% has three extra fields, the first is the value of |\@currentlabelname|,
% which is either of the form ``Subfigure\textvisiblespace1(a)'' or
% was defined by the optional argument to |\label| (actually 
% |\sub@label|). The second extra field is the hypertext anchor name
% and the third is unused.  Otherwise, the we us the standard |\newlabel|
% form to write the sub-reference.
% 
%    \begin{macrocode}
\newcommand*{\sf@@sub@label}[1]{%
  \@bsphack
  \subfig@oldlabel{#1}%
  \ifhyperrefloaded
    \protected@write\@auxout{}{%
        \string\newlabel{sub@#1}%
            {{\@nameuse{@@thesub\@captype}}%
            {\thepage}%
            {\expandafter\strip@period\@currentlabelname\relax.\relax\@@@}%
            {\@currentHref}%
            {}}}%
  \else
    \protected@write\@auxout{}{%
        \string\newlabel{sub@#1}%
            {{\@nameuse{@@thesub\@captype}}%
            {\thepage}}}%
  \fi
  \@esphack}
%    \end{macrocode}
%
% \end{macro}
%
% \begin{macro}{\subref}
%
% The |\subref| command is the same as the |\ref| command except that
% |\@@thesubtable| instead of |\p@subfigure\thesubfigure| or
% |\p@subtable\thesubtable|.  This is often of use for local references
% within the figure where the figure number may be assumed; or, for ease
% in constructing a range of references within a figure with many
% subfigures.
% 
%    \begin{macrocode}
\newcommand\subref[1]{%
  \ref{sub@#1}}
%    \end{macrocode}
%
% \end{macro}
%
% \begin{macro}{\Subref}
%
% \changes{v2.1.2}{26 Mar 2002}{Changed \cmd{\subref*} to \cmd{\Subref} to 
% avoid problems in writing to the \Lfile{aux} file.}
%
% \changes{v2.1}{23 Jan 2002}{Added \cmd{\subref*} at the request of Benoit
% Hudson (bhudson\@cs.cmu.edu).}
% 
% The |\Subref| command is the same as |\subref|, except that it adds
% |\subcaplabelfont| before the reference so that it uses the same font
% (except that the current font size is maintained).
% 
%    \begin{macrocode}
\newcommand\Subref[1]{%
  {\subcaplabelfont 
   \ref{sub@#1}}}
%    \end{macrocode}
% \end{macro}
%
% \iffalse
%</package>
% \fi
%
% \Finale
%
\endinput
