This is TeX, Version 3.1415 (C version 6.1) (format=latex 98.10.5) 14 OCT 1998 10:58 **&latex2e test-pst.tex (test-pst.tex LaTeX2e <1998/06/01> Babel and hyphenation patterns for english, loaded. (/usr/local/lib/tex/latex2e/unpacked/article.cls Document Class: article 1998/05/05 v1.3y Standard LaTeX document class (/usr/local/lib/tex/latex2e/unpacked/size10.clo File: size10.clo 1998/05/05 v1.3y Standard LaTeX file (size option) ) \c@part=\count79 \c@section=\count80 \c@subsection=\count81 \c@subsubsection=\count82 \c@paragraph=\count83 \c@subparagraph=\count84 \c@figure=\count85 \c@table=\count86 \abovecaptionskip=\skip41 \belowcaptionskip=\skip42 \bibindent=\dimen102 ) (/usr/local/lib/tex/latex2e/unpacked/inputenc.sty beta test version Package: inputenc 1998/03/05 v0.97 Input encoding file (test version: still lia ble to change) (/usr/local/lib/tex/latex2e/unpacked/latin1.def File: latin1.def 1998/03/05 v0.97 Input encoding file (test version: still liab le to change) )) (/u/ma/hohn/latex/calc.sty) (/usr/local/lib/tex/latex2e/unpacked/graphicx.sty Package: graphicx 1997/06/09 v1.0d Enhanced LaTeX Graphics (DPC,SPQR) (/usr/local/lib/tex/latex2e/unpacked/keyval.sty Package: keyval 1998/06/05 v1.11 key=value parser (DPC) \KV@toks@=\toks14 ) (/usr/local/lib/tex/latex2e/unpacked/graphics.sty Package: graphics 1998/05/27 v1.0h Standard LaTeX Graphics (DPC,SPQR) (/usr/local/lib/tex/inputs/trig.sty Package: trig 1994/10/16 v1.08 sin cos tan (DPC) ) (/usr/local/lib/tex/latex2e/unpacked/graphics.cfg) Package graphics Info: Driver file: dvips.def on input line 85. (/usr/local/lib/tex/latex2e/unpacked/dvips.def File: dvips.def 1998/05/03 v3.0f Driver-dependant file (DPC,SPQR) )) \Gin@req@height=\dimen103 \Gin@req@width=\dimen104 ) (/usr/local/lib/tex/latex2e/unpacked/ifthen.sty Package: ifthen 1997/11/02 v1.0n Standard LaTeX ifthen package (DPC) ) (/usr/local/lib/tex/latex2e/unpacked/subfigure.sty Package: subfigure 1995/03/06 v2.0 subfigure package Package: subfigure 1995/03/06 v2.0 \c@subfigure=\count87 \c@lofdepth=\count88 \c@subtable=\count89 \c@lotdepth=\count90 ) (/u/ma/hohn/latex/pst-all.sty Package: pst-all 1997/03/25 all pstricks tools (/usr/local/lib/tex/latex2e/unpacked/pstcol.sty Package: pstcol 1996/10/28 v1.0 PSTricks color colompatibility (DPC) (/u/ma/hohn/latex/pstricks.sty Package: pstricks 1997/03/25 package wrapper for PSTricks pstricks.tex (/u/ma/hohn/latex/pstricks.tex `PSTricks' v97 patch 9 <1998/01/07> (tvz) \pst@dima=\dimen105 \pst@dimb=\dimen106 \pst@dimc=\dimen107 \pst@dimd=\dimen108 \pst@dimg=\dimen109 \pst@dimh=\dimen110 \pst@hbox=\box26 \pst@boxg=\box27 \pst@cnta=\count91 \pst@cntb=\count92 \pst@cntc=\count93 \pst@cntd=\count94 \pst@cntg=\count95 \pst@cnth=\count96 \pst@toks=\toks15 (/u/ma/hohn/latex/pstricks.con) \psunit=\dimen111 \psxunit=\dimen112 \psyunit=\dimen113 \pslinewidth=\dimen114 \pst@customdefs=\toks16 \pslinearc=\dimen115 \everypsbox=\toks17 \psframesep=\dimen116 \pslabelsep=\dimen117 \theoverlaybox=\box28 )) (/usr/local/lib/tex/latex2e/unpacked/color.sty Package: color 1998/05/27 v1.0g Standard LaTeX Color (DPC) Package color Info: Driver file: dvips.def on input line 130. )) (/u/ma/hohn/latex/pst-grad.sty Package: pst-grad 1997/03/25 package wrapper for PSTricks pst-grad.tex (/u/ma/hohn/latex/pst-grad.tex v97 patch 1, 1997/04/28 Package color Info: Redefining color gradbegin on input line 43. Package color Info: Redefining color gradend on input line 47. )) (/u/ma/hohn/latex/pst-plot.sty Package: pst-plot 1997/03/25 package wrapper for PSTricks pst-plot.tex (/u/ma/hohn/latex/pst-plot.tex v97 patch 1, 1997/04/28 (/u/ma/hohn/latex/multido.tex v1.4, 93/01/14 \multido@count=\count97 \multidocount=\count98 \multido@stuff=\toks18 ))) (/u/ma/hohn/latex/pst-coil.sty Package: pst-coil 1997/03/25 package wrapper for PSTricks pst-coil.tex (/u/ma/hohn/latex/pst-coil.tex v97 patch 2, 1998/03/19)) (/u/ma/hohn/latex/pst-text.sty Package: pst-text 1997/03/25 package wrapper for PSTricks pst-text.tex (/u/ma/hohn/latex/pst-text.tex v97, 1997/03/25)) (/u/ma/hohn/latex/pst-char.sty Package: pst-char 1997/03/25 package wrapper for PSTricks pst-char.tex (/u/ma/hohn/latex/pst-char.tex v97 patch 1, 1998/07/03)) (/u/ma/hohn/latex/pst-node.sty Package: pst-node 1997/03/25 package wrapper for PSTricks pst-node.tex (/u/ma/hohn/latex/pst-node.tex v97 patch 6, 1998/04/28 \psrow=\count99 \pscol=\count100 \psmatrixcnt=\count101 \psrowsep=\skip43 \pscolsep=\skip44 )) (/u/ma/hohn/latex/pst-3d.sty Package: pst-3d 1997/03/25 package wrapper for PSTricks pst-3d.tex (/u/ma/hohn/latex/pst-3d.tex v97, 1997/03/25)) (/u/ma/hohn/latex/pst-eps.sty Package: pst-eps 1997/03/25 package wrapper for PSTricks pst-eps.tex (/u/ma/hohn/latex/pst-eps.tex v97 patch 1, 1997/05/05 \pst@epsout=\write3 \pst@tempout=\write4 )) (/u/ma/hohn/latex/pst-fill.sty Package: pst-fill 1997/04/08 package wrapper for PSTricks pst-fill package (/u/ma/hohn/latex/pst-fill.tex v97 patch 2, 1997/12/12 \pst@fillbox=\box29 )) (/u/ma/hohn/latex/pst-tree.sty Package: pst-tree 1997/03/25 package wrapper for PSTricks pst-tree.tex (/u/ma/hohn/latex/pst-tree.tex v97 patch 3, 1997/09/24 \pstree@rootbox=\box30 \pstree@box=\box31 \psnodecnt=\count102 \pstreelevel=\count103 \pstreecnt=\count104 \pstree@cnt=\count105 \pstree@stop=\count106 )) (/u/ma/hohn/latex/multido.sty Package: multido 1997/03/25 package wrapper for PSTricks multido.tex (/u/ma/hohn/latex/multido.tex v1.4, 93/01/14 ))) (/u/ma/hohn/latex/pst-poly.sty Package: pst-poly 1997/06/11 package wrapper for PSTricks pst-poly.tex (/u/ma/hohn/latex/pst-poly.tex `PST-Polygon' v1.4, 98/07/09 (Denis Girou) ! I can't find file `pst-key.tex'. l.24 \input pst-key.tex Please type another input file name: pst-key.tex (/u/ma/hohn/latex/pst-key.tex keyval: 1998/07/23 v1.11 key=value parser (DPC) ) \psl@PolyIntermediatePoint=\dimen118 )) ! LaTeX Error: File `random.tex' not found. Type X to quit or to proceed, or enter new name. (Default extension: tex) Enter file name: No file test-pst.aux. LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 50. LaTeX Font Info: ... okay on input line 50. LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 50. LaTeX Font Info: ... okay on input line 50. LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 50. LaTeX Font Info: ... okay on input line 50. LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 50. LaTeX Font Info: ... okay on input line 50. LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 50. LaTeX Font Info: ... okay on input line 50. LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 50. LaTeX Font Info: ... okay on input line 50. LaTeX Font Info: External font `cmex10' loaded for size (Font) <17.28> on input line 57. LaTeX Font Info: External font `cmex10' loaded for size (Font) <12> on input line 57. LaTeX Font Info: External font `cmex10' loaded for size (Font) <8> on input line 57. LaTeX Font Info: External font `cmex10' loaded for size (Font) <6> on input line 57. (lgc/4-2-1.inl) (lgc/4-2-2.inl) (lgc/4-2-3.inl) (lgc/4-2-4.inl) (lgc/4-2-5.inl) (lgc/4-3-1.inl) Overfull \hbox (94.63412pt too wide) in paragraph at lines 5--71 [][] [] (lgc/4-3-2.inl) [1 ] (lgc/4-4-1.inl) (lgc/4-4-2.inl) (lgc/4-4-3.inl) (lgc/4-4-4.inl) (lgc/4-4-5.inl) (lgc/4-4-6.inl) (lgc/4-4-7.inl) (lgc/4-4-8.inl) (lgc/4-4-9.inl) (lgc/4-4-10.inl) (lgc/4-4-11.inl) (lgc/4-4-12.inl) [2 ] (lgc/4-5-1.inl) (lgc/4-5-2.inl) (lgc/4-5-3.inl) (lgc/4-5-4.inl LaTeX Font Info: External font `cmex10' loaded for size (Font) <7> on input line 5. LaTeX Font Info: External font `cmex10' loaded for size (Font) <5> on input line 5. ) (lgc/4-5-5.inl) (lgc/4-5-6.inl) (lgc/4-5-7.inl) Overfull \hbox (13.53253pt too wide) in paragraph at lines 1--103 [][] [] (lgc/4-5-8.inl LaTeX Font Info: External font `cmex10' loaded for size (Font) <24.88> on input line 3. LaTeX Font Info: External font `cmex10' loaded for size (Font) <20.74> on input line 3. ) (lgc/4-5-9.inl) Overfull \hbox (3.82803pt too wide) in paragraph at lines 1--105 [][] [] (lgc/4-5-10.inl) (lgc/4-5-11.inl) [3 ] (lgc/4-5-13.inl) (lgc/4-5-14.inl LaTeX Font Info: Try loading font information for OT1+ptm on input line 2. (/usr/local/lib/tex/latex2e/fonts/ot1ptm.fd File: ot1ptm.fd 1997/02/11 Fontinst v1.6 font definitions for OT1/ptm. ) LaTeX Font Info: Calculating math sizes for size <108.405> on input line 4. LaTeX Font Warning: Font shape `OT1/cmr/m/n' in size <108.405> not available (Font) size <24.88> substituted on input line 4. LaTeX Font Warning: Font shape `OT1/cmr/m/n' in size <75.88316> not available (Font) size <24.88> substituted on input line 4. LaTeX Font Warning: Font shape `OT1/cmr/m/n' in size <54.2025> not available (Font) size <24.88> substituted on input line 4. LaTeX Font Warning: Font shape `OML/cmm/m/it' in size <108.405> not available (Font) size <24.88> substituted on input line 4. LaTeX Font Warning: Font shape `OML/cmm/m/it' in size <75.88316> not available (Font) size <24.88> substituted on input line 4. LaTeX Font Warning: Font shape `OML/cmm/m/it' in size <54.2025> not available (Font) size <24.88> substituted on input line 4. LaTeX Font Warning: Font shape `OMS/cmsy/m/n' in size <108.405> not available (Font) size <24.88> substituted on input line 4. LaTeX Font Warning: Font shape `OMS/cmsy/m/n' in size <75.88316> not available (Font) size <24.88> substituted on input line 4. LaTeX Font Warning: Font shape `OMS/cmsy/m/n' in size <54.2025> not available (Font) size <24.88> substituted on input line 4. LaTeX Font Info: External font `cmex10' loaded for size (Font) <108.405> on input line 4. LaTeX Font Info: External font `cmex10' loaded for size (Font) <75.88316> on input line 4. LaTeX Font Info: External font `cmex10' loaded for size (Font) <54.2025> on input line 4. ) Overfull \hbox (39.64838pt too wide) in paragraph at lines 5--115 [][] [] (lgc/4-5-16.inl LaTeX Font Info: Try loading font information for T1+phv on input line 1. (/usr/local/lib/tex/latex2e/fonts/t1phv.fd File: t1phv.fd 1997/02/11 Fontinst v1.6 font definitions for T1/phv. ) LaTeX Font Info: Try loading font information for T1+ptm on input line 2. (/usr/local/lib/tex/latex2e/fonts/t1ptm.fd File: t1ptm.fd 1997/02/11 Fontinst v1.6 font definitions for T1/ptm. ) \c@myN=\count107 ) [4 ] (lgc/4-6-1.inl) (lgc/4-6-2.inl) (lgc/4-6-3.inl) (lgc/4-6-4.inl) (lgc/4-6-5.in l) (lgc/4-6-6.inl) (lgc/4-6-7.inl) (lgc/4-6-8.inl) (lgc/4-6-9.inl) (lgc/4-6-10.inl) (lgc/4-6-11.inl) (lgc/4-6-12.inl) (lgc/4-6-13.inl) (lgc/4-6-14.inl) (lgc/4-6-15.inl) (lgc/4-6-16.inl) (lgc/4-6-17.inl) (lgc/4-6-18.inl) LaTeX Warning: Float too large for page by 46.92912pt on input line 142. [5] (lgc/4-6-19.inl) (lgc/4-6-20.inl) (lgc/4-6-21.inl) (lgc/4-6-22.inl) (lgc/4-6-23.inl) (lgc/4-6-24.inl) (lgc/4-6-25.inl) (lgc/4-6-26.inl \c@CtA=\count108 \c@CtB=\count109 ) (lgc/4-6-27.inl) Overfull \hbox (152.98225pt too wide) in paragraph at lines 13--160 [][] [] (lgc/4-6-28.inl) (lgc/4-6-29.inl) (lgc/4-6-30.inl) (lgc/4-6-31.inl) (lgc/4-6-32.inl) LaTeX Warning: Float too large for page by 31.63815pt on input line 167. [6 ] [7] (lgc/4-6-33.inl) (lgc/4-6-34.inl) (lgc/4-6-35.inl) (lgc/4-6-36.inl) (lgc/4-6-37.inl) LaTeX Warning: Float too large for page by 43.4122pt on input line 178. [8] (lgc/4-6-38.inl) (lgc/4-6-39.inl) (lgc/4-6-40.inl) Overfull \hbox (11.25578pt too wide) in paragraph at lines 24--185 [][] [] (lgc/4-6-41.inl) LaTeX Warning: Float too large for page by 29.16759pt on input line 188. [9] (lgc/4-6-42.inl) (lgc/4-6-43.inl) (lgc/4-6-44.inl) (lgc/4-6-45.inl) (lgc/4-6-46.inl) LaTeX Warning: Float too large for page by 0.84789pt on input line 199. [10] (lgc/4-7-1.inl) (lgc/4-7-2.inl) (lgc/4-7-4.inl \c@lastval=\count110 \c@thishalf=\count111 \c@thisval=\count112 ! Missing number, treated as zero. ( l.39 \end{pspicture}} ? ! Missing number, treated as zero. \relax l.39 \end{pspicture}} ? ! Missing number, treated as zero. ( l.39 \end{pspicture}} ? ! Missing number, treated as zero. \relax l.39 \end{pspicture}} ? ! Missing number, treated as zero. ( l.39 \end{pspicture}} ? ! Missing number, treated as zero. \relax l.39 \end{pspicture}} ? ! Missing number, treated as zero. ( l.39 \end{pspicture}} ? ! Missing number, treated as zero. \relax l.39 \end{pspicture}} ? q OK, entering \batchmode... ! Missing number, treated as zero. ( l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. \relax l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. ( l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. \relax l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. ( l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. \relax l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. ( l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. \relax l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. ( l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. \relax l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. ( l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. \relax l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. ( l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. \relax l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. ( l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. \relax l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. ( l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. \relax l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. ( l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. \relax l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. ( l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. \relax l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. ( l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing number, treated as zero. \relax l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ) LaTeX Warning: Float too large for page by 73.36333pt on input line 208. [11] (lgc/4-8-1.inl) (lgc/4-8-2.inl) (lgc/4-8-3.inl) Overfull \hbox (17.07176pt too wide) in paragraph at lines 6--215 [][] [] (lgc/4-8-4.inl) [12 ] (lgc/4-8-5.inl) (lgc/4-9-1.inl) (lgc/4-9-2.inl) [13 ] (lgc/4-10-1.inl) (lgc/4-10-2.inl) (lgc/4-10-3.inl) (lgc/4-10-4.inl) (lgc/4-10 -5.inl \X=\dimen119 \Y=\dimen120 \Coor=\dimen121 ! Undefined control sequence. \RandomWalk #1->\setrandim \X {0pt}{1pt} \setrandim \Y {0pt}{1pt} \psdots [d... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \RandomWalk ...setrandim \X {0pt}{1pt} \setrandim \Y {0pt}{1pt} \psdots [dot... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.39 \end{pspicture}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \pointless \X ,\pointless \Y l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \MoveCoordinate #1->\setrandim \Coor {-0.03pt}{0.03pt} \advance #1 by \Coor ... l.39 \end{pspicture}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.39 \end{pspicture}} (That makes 100 errors; please try again.) Here is how much of TeX's memory you used: 3634 strings out of 10896 36800 string characters out of 71854 178061 words of memory out of 262141 5722 multiletter control sequences out of 9500 18526 words of font info for 52 fonts, out of 100000 for 255 14 hyphenation exceptions out of 607 30i,20n,53p,248b,780s stack positions out of 300i,40n,60p,3000b,4000s Output written on test-pst.dvi (13 pages, 327456 bytes).